CONSTRUCTION OF ART and CRAFT ROOM AT GOVT. HIGH SCHOOL KANTHI ZONE RAMBAN DISTRICT RAMBAN (2nd call)

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (nallah stone aggregates) (including all lead lift and carriages)

Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulder (including all lead lift and carriages)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates. (including all lead lift and carriages)

Reinforcement of R.c.c work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete. (including all lead lift and carriages)

Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar. (including all lead lift and carriages)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete.

Centering and shuttermg including strutting, propping etc. and removal of form for·Lintels, beams, plinth beams, girders, bressumers and centilevers.

Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required for doors and windows frames. (including all lead lift and carriages)

Cement plaster in 1:6 ( 1 cement:6 fine sand ) , 15 mm thick. (including all lead lift and carriages)

Providing and fixing panelled or panelled or glazed shutters for doors and windows and clestory windows including ISI marked black enameled M.S butt hinges with necessary screws, including paneling which will be paid separately.(35 mm thick of 2nd class kail wood).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled andglazed shutters towards the cost 4mm thick glass panes.Extra on item no-11) towards the cost 4mm thick glass panes.

Cement concrete flooring in (1:2:4), finishing with a floating coat of cement slurry, but excl. the cost of nosing of steps etc. complete.40mm thick. (including all lead lift and carriages)

Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring.

Painting with synthetic enamel paint of approved brandand manufacture to give an even shade. Two or more coats on new work including priming coat

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and ineluding priming coat with cement primer

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1O sqm

Making plinth protection 50mm thick with cement concrete ( 1 : 3 : 6) 1 cement : 3 Coarse sand: 6 stone aggregate) 20 mm nominal size of stone aggregate over 75 mm bed of dry brick allast , 40 mm nominal size of well rammed and consolidated and grouted crushed (including all lead lift and carriages)

Structural steel work in built up section,trusses and framed work,including cutting,hoisting fixing in position and applying a priming coat of approved steel primer including soffits and eaves boarding all complete. (including all lead lift and carriages)

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washersor with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 275gm/m2. (including all lead lift and carriages)

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo/FIR Wood

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

Providing and Fxing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868) transparent or dyed to required colouur or shade with necessary screws etc. complete 100mm LMR

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100mm

Providing and Fxing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm

Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complet.e 300x16 mm

Dilber Sohil

M/S Javed Iqbal