Supply and fixing Furniture on First Floor of Medical College, SMVDIME (Make Shift ) in New Academic Block at SMVD UNIVERSITY, KAKRYAL, KATRA

MEDICAL COLLEGE

READING TABLE-Supplying & placing study table in completely knock down conditions with an overall size 1800mm X 900mm X 750mm that is to be assembled at site. The worktop shall be made up of 25mm thick PLY with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS/CRCA rectangle pipe having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall consist of C frame MS/CRCA leg having cross-sectional area 60mm X 30mm. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor.

READING CHAIR- Supplying & Placing Cafe Chair. The seat and back shall be made of moulded polypropylene shell of 7mm thick and seat shall be upholstered with hogh resiliance polyurethane foam 19mm thick having density 40Kg/m³ with leatherite tapestry. The seat & back shall be bend in L-type shape. The frame structure shall be supported by four legs made up of moulded polypropylene of size 38mmX33mm. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 380±10 mm(D)X435±10 mm(W) and back size shall be 435±10 mm(W)X390±10 mm(Ht) from seat. Overall height shall be = 830±10 mm.

4 DOOR BOOKCASE-Supplying & placing study table in completely knock down conditions with an overall size 1500mm X 900mm X 750mm that is to be assembled at site. The worktop shall be made up of 25mm thick PLY with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS/CRCA rectangle pipe having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall consist of C frame MS/CRCA leg having cross-sectional area 60mm X 30mm. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor.

DEMONSTRATOR TABLE-Supplying & Placing executive table in completely knock down conditions with an overall size W1200 X D600 X H750 that is to be assembled at site. The table top shall be made up of 18mm thick PLY with approved laminate and finish as per approved shade. The profile shall be in rectangle shape edges shall be sealed with 2mm thick thin strip of impermeable PVC edge banding. The top shall be supported over PLY base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 18mm thick PLY with approved laminate and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick PLY with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of PLY with approved laminate . Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor.

CHAIR FOR DEMONSTRATOR TABLE- Providing and supplying visitor chair with ergonomic design for user comfort. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m³ in seat and 45mm thick having density 35Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. The frame structure shall be cantilever support type made up of MS/CRCA powder coated with 50-60µ (DFT) thick round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 480±10 mm(W) X 450±10 mm(D) and back size shall be 480±10 mm(W) X 400±10 mm(H) from seat & overall height = 820±10 mm.

BOOK RACK- Providing, supplying and placing an open display book racks. The overall size of the rack shall be 925mm (W) X 300mm (D) X 1800mm (H). The rack shall be supplied with 4 nos. of adjustable shelves i.e. 5 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Side and top shall be covered with 18mm thick PLY with laminate. The edges of the board shall be sealed with 2mm thick PVC edge banding. The add-on units can be stacked width wise to form a bank of racks having common panel. Back panel up to the bottom of third rack shall have additional rigidity. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 80 kg maximum. Each rack shall be provided with stiffener at bottom for strength. Label holder & range indicators on each main unit for inserting labels. All steel components shall be epoxy polyester powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.

REVOLVING STOOL-Providing and Placing in position Ht. Adjustable Stool with Back. The seat shall be made up of 1.2±0.1cm thick flat plywood and with moulded Polyurethane foam and are upholstered with replaceable synthetic leather covers. The dimensions of Seat shall be Diameter 40.0 cm and Adjustments are 360° Revolving type. The back foam shall be designed with contoured Lumbar support for extra comfort. The upholstery shall be available in synthetic leather. The dimensions of Back shall be 45.0 cm (W) covered with polyurethane foam. The HR polyurethane Foam shall be moulded with density = 40 +/-2 kg/m3. The five-prong pedestal shall be fabricated from 0.2 ± 0.02 cm thick HR sheet ( IS : DD 1079/ HR ), Powder coated ( DFT 40-60 microns ). The twin wheel castors shall be injection moulded in Black Nylon.

STEEL ALMIRAH-Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

ROUND TABLE-Supplying & Placing Conference table in completely knock down conditions with an overall size Dia. 1200mm X 750mm that is to be assembled at site. The table top shall be made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in circular shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table shall be supported on MS powder coated rectangle pipe frame having cross-section area 50mm X 25mm with 1.6mm thick. The table understructure shall have 3 nos. chrome plated reducing leg. There shall shoe provided at the base to avoid scratches on the floor.

CHAIRS ROUND TABLES- Supplying and placing ergonomically designed, comfortable & aesthetically appealing Medium back chair. The seat shall be made of 15mm thick hot pressed malaysian plywood with HR polyurethane foam 50mm thick having density 40kg/m³ upholstered with fabric air mesh tapestry in black colour with 0.9mm thick and 300 GSM and the back shall be made of double layered moulded hot pressed plywood (12+6)mm thick with HR polyurethane foam 30mm thick having density 32kg/m³ upholstered with Jute fabric tapestry in grey colour with 1mm thick and 300 GSM and foam net in black colour with 0.9mm thick & 300GSM behind of the back. Seat and back shall be joined with HR steel powder coated sheet. The armrest shall be used PU arm adjustable type completely joint with seat. The chair shall have synchro knee tilt revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustable 100mm with BIFMA standard class-3 gaslift. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. 500±10mm(W) X 510±10mm(D) and back size shall be 490±10mm(W) & 530±10mm(H) from seat & overall height = 980±10mm.

COUNCIL ROOM TABLE- Supplying and placing in position Table (Will place with existing conference table) of the following specification with wire manager size shall be 3800(1900 + 1900 Width mm x 1500 Depth mm x 745 Height mm. The top shall be made from 25 mm thick prelaminated Ply confirming to IS-1328:1998 with 2 mm PVC edge beading. The under structure shall have side panels of 25 mm thick prelaminated ply confirming to IS-1328:1998 twin with 2 mm thick PVC lipping of same colour on sides and 0.8 mm PVC lipping of matching coloron the bottom curve. The Modesty shall be made from 18 mm thick pre-laminated Ply confirming to IS1328:1998 with 0.8 mm PVC lipping of matching colour. Centre Support Panel for Seater shall have panels made from 25 mm thick pre confirming to IS-1328:1998 twin with 2 mm PVC lipping matching colour on sides.

HOD EXECUTIVE TABLE - Supplying & Placing Modular table in completely knock down conditions with an overall size 2250mm X 2100mm X 750mm that is to be assembled at site. The work top shall have the size 2100mm X 1050mm made up of 50mm thick Ply Mr Grade approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick PVC edge banding. Single sided flapper box shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 50mm thick Ply Mr Grade and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table with appropriate PVC edge banding connected with both end. The table shall have side unit for storage purpose with an overall size 2100mm X 600mm X 641mm. The side unit shall be made up of Ply Mr Grade with drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, top etc. It shall have 3 drawer, 1 shutter and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single lock. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom.

HOD MAIN CHAIR-Providing and supplying a high back chair. The seat and back shall be made up of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+30)mm thick having density (32 & 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with polypropylene arm with cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The Hydraulic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged MS CRCA powder coated with 40-60µ thick having pitch circle dia. 600 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 480±10 mm(D) X 520±10 mm(W) and back size shall be 540±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1140±10 mm, overall depth/width = 700±10 mm.

HOD VISITOR CHAIR-Providing and supplying a visitor chair. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+30)mm thick having density (30, 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for back support. The chair shall be supplied with polypropylene arm with cushion base leatherite covering top. The frame structure shall be cantilever support type made of MS CRCA powder coated 50-60µ (DFT) thick round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 480±10 mm(D) X 520±10 mm(W) and back size shall be 540±10 mm(W) X 600±10 mm(H) from seat. Overall height shall be = 1055±10 mm, overall depth = 640±10 mm & overall width = 660±10 mm.

GLASS STEEL ALMIRAH-Providing, supplying and placing Glass Steel Almirah. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H). The Almirah shall be supplied with 2 nos. of glass doors with 4 nos. of adjustable shelves i.e. 5 loading compartments. The glass used shall be 4mm thick clear. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel, shelf and door shall be made of high yield strength 0.8mm thick CRCA sheet of grade ‘D’ confirming to IS: 513. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50µ thick.

2-SEATER SOFA- Supplying and placing a two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The complete structure shall be fully upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall be supported by pipe frame leg of SS shiny chrome finish having length 875mm and height 100mm with cross-section area 67mm X 13mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 600mm(D) X 1210 mm(W), seat height 440 mm, overall width 1535 mm, overall depth 935 mm & overall height 850 mm.

3-SEATER SOFA- Supplying and placing a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The complete structure shall be fully upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall be supported by pipe frame leg of SS shiny chrome finish having length 875mm and height 100mm with cross-section area 67mm X 13mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 600 mm(D) X 1810 mm(W), seat height 440 mm, overall width 2120 mm, overall depth 935 mm & overall height 850 mm.

CENTRE TABLE-Providing and supplying centre table with an overall size 1200mm X 600mm X 430mm. The top and side cladding shall be made up of 36mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. Extruded aluminium section shall be inserted within side corner edge at both side of the table. There shall be leveller shoe provided at the bottom.

CORNER TABLE- Providing and supplying centre table with an overall size 600mm X 600mm X 430mm. The top and side cladding shall be made up of 36mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. Extruded aluminium section shall be inserted within side corner edge at both side of the table. There shall be leveller shoe provided at the bottom.

CONFERENCE TABLE-Supplying & Placing Conference table in completely knock down conditions with an overall size 4500mm X 1500mm X H750mm that is to be assembled at site. The construction of the main table shall be with minifix dowels, pins and MS brackets. The top shall be made up of 25mm thick PLY MR garde with approved laminate and finish as per approved shade. The table top profile shall be in rectangular shape and the edges shall be sealed with 2mm thick PVC edge banding. Single sided flapper box shall be enclosed at table top that houses video, audio, LAN and data and power connection discretely. The table top shall be supported on PLY MR garde base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick PLY MR garde and shall be sealed with 2mm thick PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall be 18mm thick PLY MR garde with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between.

MAIN CONFERENCE CHAIR-Providing and supplying High Back Chair. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 45-50kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded Adjustable PU arm completely joint with seat with Up & Down position. For seating durability the chair shall have swivel 360 degree revolving mechanism having upright locking and Swivel Tilt tension adjustment with anti-shock feature. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 465±10 mm(W) X 485±10 mm(D) and back size shall be 470±10 mm(W) & 750±10 mm(H) from seat & overall height = 1260±10 mm.

CONFERENCE CHAIR-Providing and supplying medium back chair. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded Adjustable PU arm completely joint with seat with Up & Down position. For seating durability the chair shall have swivel 360 degree revolving mechanism having upright locking and Swivel Tilt tension adjustment with anri-shock feature. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 465±10 mm(W) X 485±10 mm(D) and back size shall be 470±10 mm(W) & 575±10 mm(H) from seat & overall height = 980±10 mm.

CONFERENCE VISITOR CHAIR-Providing and supplying Visitor chair. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU arm completely joint with seat. The frame structure shall be cantilever support type made up of MS/CRCA chrome plated round pipe of Dia 25mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 465±10 mm(W) X 485±10 mm(D) and back size shall be 575±10 mm(H) from seat & overall height = 980±10 mm.

FACULTY TABLE WITH PEDESTAL- Supplying & Placing executive table in completely knock down conditions with an overall size 1350mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick Ply Mr Grade approved laminate. The profile shall be in rectangle shape with front full round post form and other edges shall be sealed with 2mm thick PVC edge banding. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick Ply Mr Grade and profile shall be in linear shape with front full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick Ply Mr Grade with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Ply Mr Grade approved laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor.

MAIN CHAIR- Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polypropylene arm completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle Dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycle with 250lbs load. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 625±10 mm(H) from seat & overall height = 1060±10 mm.

STEEL ALMIRAH - Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

FACULTY TABLE WITH PEDESTAL- Supplying & Placing executive table in completely knock down conditions with an overall size 1350mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick Ply Mr Grade approved laminate. The profile shall be in rectangle shape with front full round post form and other edges shall be sealed with 2mm thick PVC edge banding. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick Ply Mr Grade and profile shall be in linear shape with front full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick Ply Mr Grade with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. Mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Ply Mr Grade approved laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor.

MAIN CHAIR-Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polypropylene arm completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle Dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycle with 250lbs load. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 625±10 mm(H) from seat & overall height = 1060±10 mm.

VISITOR CHAIR- Providing and supplying visitor chair with ergonomic design for user comfort. The seat and back shall be made of 12mm thick hot pressed commercial plywood padded with high resiliance moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 300 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine which helps to provide back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the the armrest shall be used black integral polypropylene arm completely joint with seat. The frame structure shall be cantilever support type made up of MS/CRCA powder coated round pipe of Dia 25.4mm with 2mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 465±10 mm(Width) X 460±10 mm(Depth) and back size shall be 480±10 (Width) X 520±10 mm(Height) from seat & overall height = 890±10mm(H), overall Depth = 645±10mm(D)

STEEL ALMIRAH - Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

FACULTY TABLE WITH PEDESTAL- Supplying & Placing Modular table in completely knock down conditions with an overall size 1500mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The work top shall have the size 1500mm X 750mm made up of 25mm thick PLY with aaproved laminate and finish as per approved shade. The table top profile shall be in rectangle shape with front full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick PLY with aaproved laminate and profile shall be in linear shape with front full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall be supplied with side unit for storage purpose with an overall size 900mm X 450mm X 750mm. The side unit shall be made up of PLY with aaproved laminate with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with the assistance of SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of PLY with aaproved laminate. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel having to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. .

MAIN CHAIR- Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU adjustable arm completely joint with seat. For seating durability the chair shall have SYNCHRO tilt mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of injection moulded in 30% glass filled black nylon having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(W) X 500±10 mm(D) and back size shall be 495±10 mm(W) X 750±10(H) from seat & overall height = 1150±10 mm.

VISITOR CHAIR- Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU arm completely joint with seat. For seating durability the chair shall have swivel 360 degree revolving mechanism having upright locking and tilt tension adjustment with anri-shock feature. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 465±10 mm(W) X 485±10 mm(D) and back size shall be 750±10 mm(H) from seat & overall height = 1260±10 mm.

STEEL ALMIRAH - Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.