REPAIRS AND MAINT OF VARIOUS FURNITURE ISSUED TO OFFICERS AND JCOs OR MD ACCN UNDER BSO OF GE BENGDUBI

Amount

ALMIRAH LARGE/MEDIUM /SMALL STEEL DRg No- FD-67(M) / 104 (M)339/340 350/351/1031/ 1033,FD-114(M), FD-243, FD-1032, FD-1034

S&F in repairs legs of Almirah Large Steel and providing new by welding made out of 1mm MS Sheet into required shape for Almirah large, rest all as shown on drg complete all as specified and directed.

S&F in repairs legs of Almirah Medium/Small steel and providing new by welding made out of 1mm MS Sheet into required shape for almirah medium/small steel, rest all as shown on drg complete all as specified and directed.

S&F in repairs replacement of brass 6 lever locks iron body with duplicate keys chromium plated to Almirah Large/Medium/Small steel , rest all as shown complete all as specified and directed.

S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah Large/Medium/Small steel, rest all as shown on drg complete all as specified and directed.

Repairs to door of Almirah Large/Medium/Small steel as specified including replacement of hinges all as shown on drawing complete all as specified and directed.

Repair to existing shelf including welding

Removal of existing worn out paint from inside & outside including preparation of surface complete of the Almirah large steel and M&L for applying two coats of 1st quality synthetic enamel paint of approved colour and make over a coat of red oxide primer, rest all as shown on drg complete all as specified and directed.

All as per item Sl No 1.07 here-in-before but Almirah Medium/small steel.

BED HARD/BED PLY TOP/TWO TIER BED STEEL Drg No- FD/E6/MAP/08(R), FD-246, TP or similar

S&F 12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable nut bolt/screws including removal of damaged ply wood complete all as specified and directed.

S&F 12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame of two tier bed with suitable nut bolt/screws including removal of damaged ply wood complete all as specified and directed. (Each plywood will be measured as single unit)

S&F in repairs to 1st quality teak wood long rail 35mm x 90mm in section as per existing size of Bed including removal of damaged long rail all complete all as specified and directed. (Each long rail will be measured as single unit)

All as per item No. 2.03, but short rail size 60mmx60mm complete all as specified and directed. (Each short rail will be measured as single unit)

S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners complete all as specified and directed.

S&F in reapirs to 4mm thick one side teak finished plywood of size 780 x 340mm including 12mm dia half cut teak wood beading of both side of head board including removal of damaged ply complete all as specified and directed.

S&F in reapirs to 4mm thick one side teak finished plywood of size 780 x 180mm including 12mm dia half cut teak wood beading of both side of foot board including removal of damaged ply complete all as specified and directed.

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel complete all as specified and directed.

Welding to broken joints of bed hard complete all as specified and directed.

Removal of existing worn out paint including preparation of surface complete of the bed hard steel and M&L for applying two coats of 1st quality synthetic enamel paint of black colour and make, over a coat of red oxide primer, rest all as shown on drg complete all as specified and directed.

CHAIR VERANDAH/CHAIR VERANDAH PVC Drg No- FD-256,FD-333, FD-359 & FD/MAP-II/06 or similar

Repair/replacement of broken Leg, each one piece made of MS conduit pipe 16G, 19/20mm dia including welding all as per drg complete all as specified and directed.

Welding joints of broken leg of 19/20mm MS tube & other joints as per drg

Hard PVC/Nylon shoes as per drg

Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approve make including removing old unserviceable cane/plastic newar from seat & back and recaning the seat & back of complete chair including handles etc with approved 4mm white plastic cane as per Matt Pattern complete all as specified and directed.

Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approve make including removing old unserviceable PVC seat and fixing new PVC seat 4mm thick wt. of seat & back not less than 0.925 kg.)of approved make complete all as specified and directed.

Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approve make including removing old unserviceable PVC back and fixing new PVC back 4mm thick (wt. of seat & back not less than 0.925 kg.) of approved make complete all as specified and directed.

CHARPOY G I PIPE PLY TOP/CHARPOY WITH PLYWOOD TOP : Drg No-FD-220/MAP or similar

S&F in repairs to 12mm thick plywood BWR Grade, single piece of approved quality with suitable steel screw and cup washer including removal of damaged plywood, rest all as shown on drg complete all as specified and directed.

S&Fixed in repairs GI Elbow 32 mm dia three way medium grade of approved make suitable for fixing the long rail/short rail/legs rest all as shown on drg complete all as specified and directed.

Welding to broken joints of Charpoy complete all as specified and directed.

S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top complete all as specified and directed.

Removal of existing worn out paint including preparation of surface complete of the charpoy hard steel and M&L for applying two coats of 1st quality synthetic enamel paint of black colour and make, over a coat of red oxide primer, rest all as shown on drg complete all as specified and directed.

CHAIR DINING/CHAIR DINING PVC SEAT (440MMx430MMx890MM) Drg No--FD-228/FD-279/FD/MAP-II/05 or similar

Removing the existing unserviceable rear leg and providing with new Teak wood rear leg of size 30x55x890 mm complete all as specified on drawing complete all as specified and directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg of size 30x55x460mm complete all as specified on drawing complete all as specified and directed.

Removing the existing unserviceable back rest and proving new Teak wood back rest of size 45x15 slightly curved out of size 45x35mm all as specified on drawing complete all as specified and directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 30x65mm drilling holes at 12.5 mm C/C complete all as specified and directed.

Removing the existing unserviceable rear rail of size and proving new Teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified and directed.

Removing the existing unserviceable side rails and providing new Teak wood side rails of size 30x65 mm including drilling holes at 12.5mm C/C complete all as specified and directed.

Removing of old unserviceable/broken PVC seat from chair dining and S&F new PVC seat 4mm thick in single piece all as per shape and size complete all as specified and directed.

Recaning of repaired chair dining with best quality of approved plastic cane 2mm wide, 0.4mm thick and border with 3x0.60 mm cane of white or cream ivory complete all as specified and directed.

CHAIR DINING OFFICERS Drg No-FD/E6/MAP/10(R) or similar in MAP

Removing the existing unserviceable rear leg from chair dining officers and providing with new Teak wood rear leg of size 25x50x1200 mm complete all as specified and directed.

Removing the existing unserviceable front leg from chair dining officers and providing with new Teak wood front leg of size 25x50x450mm complete all as specified and directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 25x50x450mm complete all as specified and directed.

Removing the existing unserviceable rear rail of size and proving new Teak wood rear rail of size 25x50x450mm complete all as specified and directed.

Removing of old unserviceable/damaged existing cushioned Seat from chair providing new seat made of 75mm thick 40 density foam cushion over 12mm thick commercial plywood BWR grade duly covered with best quality tapestry complete all as specified and directed.

CHAIR WRITING (535MMx470MMx890MM) Drg No-FD-202/FD-250/FD-280

Removing the existing unserviceable rear leg and providing with new Teak wood rear leg of size 55x30x890mm complete all as specified and directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg of size 55x30x660mm complete all as specified and directed.

Removing the existing unserviceable back rest and providing new Teak wood back rest of size 50 x 15mm slightly curved made out of 50x35mm complete all as specified and directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 30x65mm including drilling holes at @ 12.5 mm C/C complete all as specified and directed.

Removing the existing unserviceable rear rail and providing new Teak wood rear rail of size 30x65mm including drilling holes @ 12.5 mm C/C complete all as specified and directed.

Removing the existing unserviceable side rails and providing new Teak wood side rails of size 30x65mm including drilling holes @ 12.5mm C/C complete all as specified and directed.

Removing the existing unserviceable broken arm rest of size 60x25 mm and providing new Teak wood arm rest complete all as specified and directed.

Recaning of repaired chair writing with best quality of approved plastic cane 2mm wide, 0.4mm thick and border with 3x0.60mm cane of white or cream/ivory complete all as specified and directed.

CHAIR EASY Drg No-FD-229 or Similar

Removing the existing unserviceable rear leg and providing with new Teak wood rear leg of size 55x25 mm complete all as specified and directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg of size 50x25mm complete all as specified and directed.

Removing the existing unserviceable broken arm rest and providing new Teak wood arm rest of size 65x25x610mm complete all as specified and directed.

Removing the existing unserviceable front frame and providing new Teak wood front frame of size 55x25 mm including drilling holes @ 12.5 mm C/C complete all as specified and directed.

Removing the existing unserviceable front rail and providing new Teak wood front rail of size 50x25 mm complete all as specified and directed.

Removing the existing unserviceable rear rails and providing new Teak wood rear rails of size 50x25mm complete all as specified and directed.

Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 2mm wide, 0.4mm thick cane and border with 3x0.60 mm cane complete all as specified and directed.

CHAIR WOODEN BOTTOM WITHOUT ARMS Drg No-FD-225, FD-285

Removing of existing unserviceable seat and provide new seat made out of 6mm thick plywood commercial BWR grade to Chair wooden bottom with wood/steel screws, complete all as specified and directed.

Removing the existing unserviceable rear leg and providing with new Teak wood rear leg complete all as specified and directed.

Removing the existing unserviceable front leg and providing with new Teak wood front leg complete all as specified and directed.

Removing the existing unserviceable side rail and providing with new Teak wood side rail complete all as specified and directed.

Removing the existing unserviceable front rail and providing with new Teak wood front rail complete all as specified and directed..

Removing the existing unserviceable rear rail and providing with new Teak wood rear rail complete all as specified and directed.

Replacement of unservicable back rest complete all as specified and directed.

COMMON FOR ALL CHAIRS Drg No-FD-228/ 279/280/225/285 or similar

Removing the existing unserviceable stiffeners and providing new Teak wood 2nd class hard wood stiffeners of size 25x20 mm complete all as specified and directed.

PEG TABLE (450MMx300MMx380MM) Drg No-FD-236/FD-277/FD-384

M&L for removing the existing unserviceable leg and providing with new Teak wood leg complete all as specified and directed.

M & L for removing the existing unserviceable top rail (Shorter side) and providing with new Teak wood top rail complete all as specified and directed.

M & L for removing the existing unserviceable bottom rail (longer side) and providing with new Teak wood bottom rail complete all as specified and directed.

All as per Sl item No 11.01 here-in-before but stiffener of Peg table.

Removing of old unserviceable top from peg table and S&F new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

SOFA SET 4/ 5 PERSON WITH CUSHION Drg No-FD-281/FD-373

Removing the existing unserviceable cushion of sofa set, tapastry cloth and replacing with new foam cushion 40 density 100mm thick of size 558mm x 533mm x 100mm duly covered with new tapastry cloth including mulmul completly stiched, rest all as shown on drg complete all as specified and directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and shall not less than Rs. 390/- per metre and as approved by GE.

Removing the existing unserviceable tapastry cloth of sofa set and replacing with new tapastry cloth mat finish of size 558mm x 533mm x 100mm with mulmul cloth complete all as specified and directed. Note : tapastry cloth costing not less than Rs. 390/- per metre and as approved by GE.

Removing the existing unserviceable front leg from Sofa and providing new first class teak wood of leg size 70mm x 35 mm x 495mm, complete all as specified and directed.

Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood leg size 70mm x 35 mm x 495mm, complete all as specified and directed.

Removing existing unserviceable Arm rest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, complete all as specified and directed.

Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 585mm, complete all as specified and directed.

Removing existing unserviceable bearer from Sofa and providing new first class teak wood bearer of size 40mm x 40mm x 725mm complete all as specified and directed.

Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm complete all as specified and directed.

Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm complete all as specified and directed.

Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm complete all as specified and directed.

TABLE DRESSING GENTS/MIRROR DRESSING GENTS Drg No-FD-230/FD-379 or similar in MAP

Replacement of existing unserviceable drawer for Table dressing gents made out of well seasoned teak wood second class complete all as specified and directed. Note- Each drawer should be measured as single unit.

S & Fixed in repairs new mirror 5mm thick of approved make with full frame complete all as specified and directed.

TABLE DRESSING LADIES Drg No-FD-251 or similar

Replacement of existing unserviceable drawer for Table dressing ladies made out of well seasoned teak wood second class complete all as specified and directed. Note-Each drawer should be measured as single unit

S&F in repairs new Glass shutters of Table dressing ladies complete all as specified and directed. Note:- Each glass shutter shall be measured as single unit

Removing the existing unserviceable Aluminium channel and S& F in repairs Aluminium Channel complete all as specified and directed.

S&F in repairs new back support made out of 6 mm thick plywood for mirror of Table dressing ladies complete all as specified and directed.

S&F in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back complete all as specified and directed.

Removing of existing unserviceable/broken PVC Shoes, M&L for fixing of PVC shoes superior quality of 20mm dia with suitable screw at the bottom of the leg in the following furniture items complete all as specified and directed. Chair Dining, Chair Writing, Chair easy, Chair Wooden bottom without arms,Table centre,Teapoy, Table Peg & Table 3'x2' with/without drawer.

S&F of Knob of aluminium anodized dark brown in shade as approved by GE in the following furniture items with screws complete all as specified and directed. Table Dressing Gents/Ladies, Side Board, Table 3'x2' with drawer, Table Writing

TEAPOY WOODEN Drg No-FD-278/FD-382 or similar

Replacement of existing unserviceable top for Teapoy made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in repairs to unserviceable damaged legs from teapoy made out of hard wood (Teak) complete all as specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of hard wood (Teak) complete all as specified and directed.

TABLE DINING 6/4 PERSONS Drg No-FD-239/FD-273 or similar

S&F in repairs to unserviceable damaged legs from Table dining 8/6/4 persons made out of hard wood (Teak) complete all as specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table dining 6/4 persons made out of hard wood (Teak) complete all as specified and directed.

Replacement of existing unserviceable table top for Table dining 6 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of hard wood (Teak) complete all as specified and directed.

Replacement of existing unserviceable table top for Table dining 4 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 4 persons made out of hard wood (Teak) complete complete all as specified and directed.

S&F in repairs Triangular wooden bracket 100X100X20mm thick hard wood (Teak) for all types of tables dining 6/4 personsbetween leg & stiffners for extra strength complete all as specified and directed.

TABLE WRITING, Drg No- FD-249/FD-275 or similar

Replacement of existing unserviceable table top for Table writing made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in replacement of unserviceable damaged legs from Table writing with new leg made out of hard wood (Teak) complete all as specified and directed.

S&F in replacement of unserviceable damaged foot rest from Table writing with new foot made out of hard wood (Teak) complete all as specified and directed.

S&F in replacement of unserviceable damaged stiffner (longer) from Table writing with new stiffner made out of hard wood (Teak) complete all as specified and directed.

S&F in replacement of damaged back ply in repair as per drg complete all as specified and directed.

S&F 18mm thick prelaminated particle board Cabinet door along with locking arrangement and handles as per drg complete all as specified and directed.

TABLE CENTRE Drg No-FD-235/FD-274

S&F in replacement of existing unserviceable table top for Table centre made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in repairs to unserviceable damaged legs from Table centre made out of hard wood (Teak) complete all as specified and directed.

S&F in repairs to unserviceable damaged top rail (long side) from table centre made out of hard wood (Teak) complete all as specified and directed.

S&F in repairs to unserviceable damaged bottom rail (short side) from table centre made out of hard wood (Teak) complete all as specified and directed.

TABLE WITH DRAWER/TABLE WITHOUT DRAWER 900x 600 x 760mm Drg No-FD-223/FD-224/FD-283/FD-284/FD-1007/FD-1008

M&L for removing of existing unserviceable table top for Table and providing new table top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in repairs to unserviceable damaged legs from Table with drawer 900x600x760mm made out of hard wood (Teak) size 60x30x740mm complete all as specified and directed.

S&F in repairs to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out of hard wood (Teak) complete all as specified and directed.

S&F in repairs unserviceable damaged long rails from Table with drawer 900x600x760mm made out of hard wood (Teak) complete all as specified and directed.

S&F in repairs to unserviceable damaged bottom stiffners (short side) from Table with drawer 900x600x760mm made out of hard wood (Teak) complete all as specified and directed..

S&F in repairs to unserviceable damaged drawers from Table with drawer 900x600x760mm made out of hard wood (Teak) including providing 6mm thk commercial ply to bottom of drawercomplete all as specified and directed.

Hat Stand with mirror Drg No-FD-233

S&F in repairs new mirror 5 mm thick for Hat stand with mirror of approved make with frame & back complete all as specified and directed.

Removing of existing unserviceable Back of Hat stand with mirror and providing new Back of 6mm plywood commercial shall be fixed with headless nail complete all as specified and directed.

S&F of brass pegs with brass screw in place of broken/ lost pegs in hat stand with mirror complete all as specified and directed.

TEAPOY VERANDAH Drg No- FD-208/FD-255 or MAP Drg

S&F in replacement of frame of top (without top) of Teapoy Verandah and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer complete all as specified and directed.

M&L for welding of broken joints of Teapoy varandah complete all as specified and directed.

S&F in replacement of existing unserviceable table top for Teapoy verandah in repairs, S&F of new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F in replacement of existing unserviceable table top for Teapoy verandah MAP in repairs and S&F of new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified and directed.

S&F Hard PVC/Nylon shoes round/square as per drg complete all as specified and directed.

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polish over a coat of mension wax polish till the smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge for the following furniture articles:-

Bed plywood top, Drg No-FD-246 or Similar

Chair dining/Chair dining PVC Seat, Drg No-FD-228/279 or Similar

Chair dining Cushioned, Drg No-FD/E6/MAP/10 (R) or similar in MAP

Chair Easy, Drg No-FD-229 or Similar

Chair Writing, Drg No-FD-280 or Similar

Chair wooden bottom, Drg No-FD-225/285 or Similar

Hat Stand with mirror, Drg No-FD-233

Sofa Set 3 Pcs 5 Seater , Drg No-FD-281/373

Sofa Set 4 Seater, Drg No-FD-281/373

Table dressing Gents with Mirror/Mirror Dressing Gents, Drg No-FD-230 or Similar in MAP

Table dressing Ladies with Mirror/Table Dressing Ladies with Stool, Drg No-FD-251

Peg Table, Drg No-FD-277/FD-384 or Similar

Table with/without drawer 900 x 600 x 760mm, Drg No- FD- 283/284 or Similar

Table dining 6/4 persons, Drg No-FD-273 or Similar in MAP

Teapoy wooden, Drg No-FD-278/382 or Similar

Table writing, Drg No-FD-275 or Similar

Table centre, Drg No-FD-274 / 235 or Similar

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 32268.50 (refer Tender Srl Page No 30). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S GENERAL TRADERS

PRADIP KUMAR BOSE

NEO BUILDERS

SHRI S K BHATTACHARJEE

M/S K M CONSTRUCTION

J.K.ROY & SONS

NABIN CONSTRUCTION AND CO.