CA NO. GE AF NO.1/GUR-69/2023-24 IMROVEMENT TO OMQ , CERTAIN OTHER BUILDINGS AND WATER SUPPLY INFRASTRUCTURE INCLUDING CERTAIN OTHER SANCTIONED WORK AT AF STATION PALAM UNDER GE (AF) GURGAON NO.1 .

Amount

Dismantling of existing roof Treatment of any description all as specified and as directed by Engr-in charge.(Including 4 Story building)a..Rate of this item is inclusive of diconnect fitment at water tank or solar heater etc and refixing in the same position with connected accessories if broken/ new items fixed after compeleting of roof treatment.

Demolition of existing mud in roofs of any thickness including plastering and leeping (whether full thickness removed or only a part thereof) (Including 4 Story building) and removing of mud as per direction by Engr in charge.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 (Including 4 Story building) complete all as specified and as directed.

M&L plain cement concrete in roof or mud stops using type B-1, 1:2:4 (20mm graded aggregate) rounded or chamfered hunching on edges or making slop on roof (Including 4 Story building ) complete all as specified and as directed

M&L 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in padding of foor/roof surfaces finished even and smooth surface complete all as specified and as directed

M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and directed

M&L water proofing treatment on roof and vertical surface consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/ sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

M&L for applying one coat Bitumen water proofing aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and directed by Engr-in-Charge. Make : PLASCON or equivalent.

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.

M & L for 10mm thick rendering in CM (1:3) on brick/stone/concrete surfaces of ceiling finished the surface even & smooth without using extra cement including preparing of new plastered surface of ceiling and applying two coats of white oil bound Distemper. complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.(Note :- Rate included for four storey building including scaffolding and all safety measures)

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed by Engineer-in-charge.

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new plastered wall surface, including necessary scaffolding upto 4th floor, complete all as specified and as directed by Engineer-in-charge.

M&L for applying two coat of Distemper oil emulsion by Auto Roller over a coat of primer over 2 to 3 mm thick birla putty punning including finishing by Sanding Machine and Auto Roller , including prepration on new wall surface complete all as specified or as directed by Engineer-in-charge.

M&L for preparation of plastered or unplastered decorated surfaces of walls by vaccum based standing machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or colured by auto roller, complete in all respect as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered decorated surfaces on ceilings by vaccum based standing machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or colured by auto roller, complete in all respect as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment from old decoratd plasterred surfaces of walls by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty and applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion anti fungal paint 100% acrilic or approved white or colured over a coat of approved primer by auto roller, complete in all respect as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, roof levelling course, bed block for flooring, stopper cum wheel track, rungs, window cills etc complete all as specified and directed by Engr-in-charge

S&F in repair rotational moulded polyethylene water storage tank (cylenderical vertical with closed top), three layered, hoisted and fixed with position of 1000 ltrs capacity including tank neeples all fittigs complete all as specified and as directed by Engr-in-Charge.

S&F in repair 500 ltrs rotational moulded polyethylene three layered water with EPI coated storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings in position including taking down existing water tank of 250 to 500 ltrs or removing of existing RCC old tank complete all as specified and directed by Engr-in-charge .

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other Situ-ation including taking down of old GI tubing complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors/walls including Taking down old GI tubing, complete all as specified and as directed.

Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia and removing from site complete all as specified and directed.

S&F in repair PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls/Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed.

S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 75mm in Bore (dia) with access door, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) Tee with access door suitable for PVC (SWR) Pipes 75mm in Bore (dia), jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and as directed.

S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with oval access door complete all as specified and as directed.

S&F in repair 75mm dia CI bends with oval access door, diminishing pieces or tapers complete all as specified and as directed.

S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and as directed.

S&F in repair 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed.

S&F in repair 100 mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed.

S&F in repair stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe complete all as specified and as directed.

S&F in repairs, 20 mm Bore gun metal Gate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all as specified and directed by Engineer in charge.

S&F Sheet Glass,4.0mm thick Ordinary, Glazing as in Window Frames fixed with Wooden oil putty/rubber beads, not exc. 0.50 Sqm in Each Pane and fixed in repairs, complete all as specified and as directed.

S&F for 25mm dia MS powder coated Curtain rod with decorative nobes on both the and MS bracket for fixing in the wall by drilling and fixing wooden gutties inclunding remove old rod etc. and as directed by Engr-in-charge

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and courtyard, finished even and smooth/fair with out using extra cement complete all as specified

Taking down door frame/ window frame with shutter of area n exc 1.50 sqm (upto 4 storey bldg), each and removing from site complete all as specified and directed by Engr-in-Charge.

Taking down door frame/ window frame with shutter of area exc 1.50 but n exc 4.0 Sqm (upto 4 storey bldg), each and removing from site complete in all respect as specified and directed by Engr-in-Charge

Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm and removing from site complete all as specified and as directed.

S&F for MS framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars; barred iron door; ladders; framed baluster; walk ways; railing; framed work of water tank, for portions framed and hung as gates, including pintle hinges, stops hand made sliding bolts, etc and similar work conforming to Fe-290, Gde-E-165 all as specified and directed by Engr-in-charge.

S&F for 35 mm thick flush shutters, solid core construction, with block board and both faces are covered with 0.90 mm thick decorative face veneer with lipping/ frame to match, complete, fixed to chowkats all as specified and directed by Engineer-in-Charge.

S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed.

S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long Aluminium anodised handles, cast type, complete in all respect as speicfied and directed by Engr-in-Charge.

S&F PVC Solid moulded Architrave Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructions complete all as specified and as directed.

S&F Factory Made PVC Solid moulded Architrave Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawings, complete all as specified and as directed.

S&F aluminium colour powder coated (shade or tint as directed by GE) window frame of three track using Jindal or equivalent section No 20832 (92x31.75x1.50mm) fixed with thrust bolt in walls by drilling and sliding shutter of section No 20844 (40x18x1.29mm) or equivalent section for glass including 4.00mm thick tinted glass fixed with rubber beading and bushes complete in two/ three track and 0.36 mm dia and 1.40mm aperture stainless steel wire mesh fixed with screw and aluminium beading complete all as specified and as directed.

S&F Aluminium colour powder coated (shade or tint as directed by GE) window frame of using Jindal or equivalent section No 20032 (61.85x31.75x1.50mm) fixed with thrust bolt in walls by drilling for half bottom and top half with top hung shutter (for ventilator purpose) using suitable section with 4mm thick tinted glass and along with aluminiyum grill complete all as specified and as directed.

S&F aluminium anodized duco grill DG 208 design as per approved pattern including aluminium U Channel etc complete all as specified and directed by Engr-in-Charge.

S&F 4.00 mm thick figure glass, in square n exc 0.5 sq m each pane over solar control film 25 microne reflective type sticked to glass panes as per instruction manufactures fixed to aluminium frame with rubber gasket or fixed with glass putty as required etc completed all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) & remove rubbish from MoD Land, complete all as specified and directed by Engr-in-charge

M & L for non-skid ceremic colour tile size of 7.00 to 8.00 mm thick (square/rectungular) area exc. 0.06 Sqm but not exc 0.11 Sqm laid in floors setting and jointed with neat cememy slurry over and including 15 mm thick screed bed in cement mortar 1:4, and pointed with coloured cement to mathc with surfaces of tiles, complete all as specified and directed by Engr-in-charge

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm,but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Laid on Floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the Tiles, complete all as specified and as directed.

All as per Srl Item No. 61 above -ditto- but in skirting including 10mm thick back coat in CM 1:3 complete all as specified and directed by Engr-in-charge

M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

S&F Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed.

S&F Bib Cock 15mm Bore (dia), Chromium Plated Long Body Bib Cock, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.

S&F stop valve CP 15mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed

S&F in repair chromium plated shower rose fancy type fixed to 15 mm bore pipe all as directed by Engr-in-Charge

S&F two way brass CP bib taps 15mm bore cast copper alloy with crutch or butterfly screwed down screwed for iron pipe or for brass ferrul and fixed in repair complete all as spd and as directed

S&F in repair Vitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed.

S&F in repair Brass CP towel rail 20 mm dia, including Taking down of old towel rail of any size, complete as all specified and directed.

M&L for plain cement concerete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling in, mass concrete, floor filling etc complete all as specified and directed by Engr-in-charge

M&L providing 50 mm thick plain cement concrete type B1,1:2:4 (20mm graded aggregate) as in floor finish complete all as specified and as directed.

S&F in repair Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (Excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, White, Closed Pattern with Recessed Bottom and Cover including SS Steel Chromium Plated Hanging Device, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Syphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F in repair Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, Chromium plated pillar tap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engr-in-Charge.

M&L for replacement of 100mm CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge

S&F Stainless Steel Kitchen Sink with Drainage Board of Overall Size 915X460mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge.

M&L in fixed in repairs for Steel Plate Rack size 2'x3'x9mm thick Steel plate complete all as specified and directed by EIC

S&F for Brass CP Fency wall mixer 15mm Bore, with hand shower and necessary taping items,Cast Copper Alloy with Capstan Heads, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. Make : Jaguar, cera, marc, Hindware.

S&F Fancy type two way Pillar Taps mixer 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. make:- Cera, Johnsen, jaguar, Marc.

S&F Brass CP Health Faucet, as Approved, including Taking down unserviceable Health Fosset of any description, complete as all specified and directed. Make :- Cera, Johnsen, jaugar, Marc.

S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, etc, complete all as specified and as directed.

Removing demolished building material including loading, unloading and stacking at the destination,distance exceeding 05 km but not exceeding 10 KM complete all as specified and as directed.

Taking up and down 25/32 mm bore steel tubing and connections, and removing from site complete all as and as directed.

Supply and fixing 25 mm Galvanised Steel water tubing (ISI Marked ) medium grade with and including all tube fittings and fixtures such as GI bends tee union etc in trenches/fixed to wall/ fixed on piller complete and connecting to water supply pipe line and testing complete all as and as directed.

Supply and fixing 32 mm Galvanised Steel water tubing (ISI Marked ) medium grade with and including all tube fittings and fixtures such as GI bends tee union etc in trenches/fixed to wall/ fixed on piller complete and connecting to water supply pipe line and testing complete all as and as directed.

Supply and fixing 25 mm dia Gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as and directed.

Excavation over area exc 1.5 mtr but n.exc 3 metre depth in soft / loose soil complete all as and as directed.

Returning , filling in including spreading, levelling, watering , well ramming in layers n. exc 25 cm in layers etc complete all as specified & directed.

Removing excavated material (soil) from site and depositing where directed outside MOD land to a distance exc. 5 km and n exc. to 15 km complete all as and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as and directed.

M&L 75mm thick plain cement concrete 1:4:8 type D-2 using (40mm graded stone aggregate ) as in sub base of floor, path and hard standing complete all as specified and directed.

M&L 75 mm thick plain cement concrete type B-1, 1:2:4 using 20 mm graded crushed stone aggregate laid in floor finish, path and hardstanding complete all as specified and directed by Engr-in-Cdharge.

M&L RCC 1:1.5:3 type B-1 using 20 mm graded stone aggregate as in chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and directed.

Form work flat to staircases with sloping or stepped soffits including risers and stringers (excluding landing) etc. complete all as specified and directed.

M & L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spiirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 15 mm thick cement plastering in CM 1:3 on brick/concrete surfaces on wall, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

M&L for 15 mm thick cement plastering in two layer (under layer 10 mm and upper layer 5 mm thick) in CM 1: 4 on brick/concrete surfaces on wall, upper layer of 5 mm thick mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

M&L for structural steel rolled section as tubular sections as in vertical steel columns with flange plates, caps, bases, base plates, splices angle brackets, cleats, holding down bolts and nuts and other section complete of Fe 410 W E-250 grade including all welding etc, complete all as specified and directed

Dismantling of plain or corrugated steel sheeting/ AC sheeting any gauge thickness including nanital or similar pattern roof coverings all as specified and as directed.

S&F pre-painted galvalume zinc coating GI based corrugated steel sheet mm 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as wall, fixed with self in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L Preparation new or previously untreated steel surface of any description, over 10 cm in width or girth applying two coat synthetic enamel paint over one coat of red oxide zinc chrome primer over complete all as specified and directed by Engr-in-charge.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed

Rendering 10 mm thick cement plastering in cement mortar 1:4 on brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L construction of brick masonry valve pit chamber size 950x950x 950 mm (internal dimension) with 1.6 mm thick MS sheet cover and angle iron frame of 40 x 40 x 6mm with hinges complete including locking arrangement including 50 mm size brass 6 lever lock of make Godrej / Link as approved and necessary excavation & earth work & painting with one coat of primer and two coats of synthetic enamel paint on mild steel work internal and external surfaces complete all as specified.

M & L for cutting existing HDPE/CI/DI Pipe 150 mm dia and inserting tee/socket and any other fitting complete all as specified and directed.

Supply & fixing cast iron fitting upto 150mm bore such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs etc. suitable for spigot and socketed pipes including taking out the defective one form the trenches or ground all as specified and directed by Engineer-in-charge.

Supply and fixing of run led joint to 150 mm dia CI/GI/DI pie comple all as specified and directed

Supplying, and laying and testing in trenches, jointing/ connecting and testing 150mm bore HDPE pipe complete, all as specified and directed by Engineer-in-Charge.

Supply and fixing cast iron sluice valve suitable for 150mm bore pipe with flanged ends drilled ISI marked class PN-1.6 conforming to IS- 14846 with stainless steel spindle, CI gate with brass nut, bolt, washer and rubber packing for connecting pieces etc complete all as specified and directed by Engineer-in-charge.

Supply & fixing galvanised iron tubes of size 40mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed by Engineer-in-charge.

Cutting cast iron pipes and reducing to required length before laying of size 150mm complete, all as specified and directed

Supply and fix in repairs MS pipe fitting as bends, tees, collar, branch pieces, cap & plug etc, both ends flange welded complete with replacement of nuts and bolts all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of MS ERW pipe C class of 150 mm dia including jointing and testing as per manufacturer's instructions complete all as specified and as directed.

Supplying, and laying and testing in trenches, jointing/ connecting and testing 150mm bore ductile iron pipe class 'k-7' with spigot and socketed ends, centrifugally cast suitable joint complete, all as specified and directed by Engineer-in-Charge.

Supply and fixing cast iron non return valve with GM sheet and flap of size 150mm bore flanged ISI marked including bolts nuts, washer and rubber gasket etc complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.

S&F aluminium colour powder coated door Frame and shutter single or double leaf with partly Sq glazed/pre laminated board exterior quality party glazed panels fabricated including aluminium powder coated beading, rubber and packing matenals and shall be drilling in existing wall and thrust bolt suitable Size complete comprising the following:- (a) Aluminium colour powder coated door frame section 101.60×44.45×1.93 mm. (b) Aluminium colour powder coated vertical section in shutter 85×44.45%2 mm. (c) Aluminium colour powder coated Top Rail & style shutter section 95.25×44.45X2.00 mm. (d) Aluminium colour powder coated handle 02 Nos in each shutter 200 mm long. (e) Aluminium colour a powder coated Tower bolt 02 Nos in each shutter 150 mm long. (r) Aluminium colour powder coated middle lock rail/bottom rail section 150×44.45x2.00mm cat No.20002. Make-Jindal (g) Six lever mortice lock brass Make : Godrej/Classic on in each door. (h) 12 mm thick particular board (pre laminated both face) exterior grade ISI Marked () Tinted glass/Plain glass 5mm thick Make : Saint gobain/ modiguard. (h) Floor spring , Make Sandu Note: If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge

S&F aluminium colour power coated (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf comprising the following:- (a) Aluminium colour powder coated (shade or tint as directed by GE) Two shutter each size 44×44x2mm top/bottom/sides style. (b) Aluminium colour powder coated butt hinges 4 Nos in each window 100 mm sizes as per spa. (C) Aluminium colour powder coated tower bolt 3 Nos in each window 100 mm long as per spd. (d) Aluminium colour powder coated handle 2 Nos in each window 100 mm long as per spd. (e) inted glass 4 mm thick with rubber beading, Make-Saint gobain/modigaurd in all two shutter. complete all as specitied and as directed.

S&F aluminium colour power coated (shade or tint as directed by GE) ventilator frame section 100x44×2mm fixed with thrust bolt in walls by drilling (any number of leaf) comprising the following: (a) Aluminium colour powder coated (shade or tint as directed by GE) Top Hung shutter each size 44×44x2mm top/bottom/sides style. (b) Aluminium colour powder coated butt hinges 4 Nos in each window 100 mm sizes as per spa. (C) Aluminium colour powder coated tower bolt 3 Nos in each window 100 mm long as per spa. (d) Aluminium colour powder coated handle 2 Nos in each window 100 mm long as per spa. (e) Tinted glass 4 mm thick with rubber beading, Make-Saint gobain/modigaurd in all tour shutter. complete all as specified and as directed.

M&L for preparaing new plastered ceiling surface and applying two coat of oil emulsion paint over a coat of primer including 1 to 2 mm thick birla putty punning complete all as specified and as directed by Engineer-in-charge.

Demolition of stone slab and tiles fixed with bedded and jointed of any description complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation for 50mm thick complete all as specified and as directed.

M&L 60mm thick Machine pressed precast concrete interlocking paver block M-35 grade any shape and size with Grey cement and with pigment conforming to IS 15658-2006 over sand cushioning as specified and as directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete in all respect as specified and as directed by Engr-in-Charge.

Providing & fixing false ceiling With fully perforated 12mm thick micro tegular edged at all heights with GRG ( Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture,design and patters having moisture content lessthan 2%. Humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32 of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvenizing @ 80 grams per sqm)i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm lenght and L shape level adjuster of size 85x25x2mm Galvenised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work complete in all respect as per specifications, drawing and as per directions of the Engineer-in-charge

Excavation in trenches n.exc 1.5m wide, n.exc1.5m deep, n.exc 10sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Material and Labour for RCC Type B-1 1:2:4 (20 mm graded stone aggrigate) as in slab supported on walls complete all as specified and as directed.

Material and Labour for Form work to soffits of suspendedslabs such as roof slabs, floor slabs etc. flat surfaces rough finished all as specified and as directed .

M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge

M&L for preparing newly plastered surfaces on walls including cornices plasters and applying two coat of cemet base paint in patches over one coat of primer complete and over 1 to 2 mm thick birla putty punning complete all as specified.

M&L for preparing new plastered surfaces plastered on ceiling applying two coat of white wash over a coat of primer complete all as specified.

S&F 500 ltrs rotational moulded polyethylene water storage Three layer tanks (cylindrical vertical with closed top) hoisted and fixed in position including Ball brass valves 20 mm dia , high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F 1000 ltrs rotational moulded polyethylene water storage Three layer tanks (cylindrical vertical with closed top) hoisted and fixed in position including Ball brass valves 20 mm dia , high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F 20 mm Bore Gun metal globe/gate valves with iron lever fixed, screwed both ends complete all as specified and as directed by Engineer in charge.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation all with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20 mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation all with Fittings and Connections, etc. complete all as specified and as directed.

S&F steel door shutter with Frame and shutter single or double leaf with 1.60 mm MS Sheet board superior quality panels fabricated including superior quality painting 03 coat , all hinges, handles, locking arrangement with biomatric system, smooth functioning ( as per existing Sample in comunication room of DLS Bldg) including glass wool filling inside of shutter & both side MS Sheet covering, 06 Nos or more hold fast as approved by GE/Engr in charge, rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size all as complete and directed by engr in charge

M&L for preparing new plastered walls surface and applying two coat of exterior emulsion paint 100% acrylic of approved colour over a coat of primer including 1 to 2 mm thick birla putty punning complete all as specified and directed by Engineer-in-charge.

E/M Portion

Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as directed

Taking down copper/aluminium submain wiring4 sqmm 3 wire complete, including conduits of any kind, and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as directed

Taking down copper/aluminium submain wiring 6 sqmm 6 wire complete, including conduits of any kind, and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as specified and directed

Taking down main switches, distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces/portion of walls etc. complete all as specified and directed

Taking down of serviceable ceiling fans/wall mounted fan and refixing the same on same position including cleaning and painting after the work is over complete all as specified and directed.

Taking down of serviceable Exhaust fans and refixing the same on same position including cleaning and painting after the work is over complete all as specified and directed.

Refixing only Fluorescent tube light fitting of any type after the repair of the buildings on the same location complete all as specified and directed.

Taking down water heater storage type electric capacity 25/50 liters and refixing the same after repair of the bldg on same location including cleaning of the geyser body complete all as specified and directed

Taking down fluorescent tube light fittings of any wattage or size and removing from site complete all as specified and directed.

M & L for point wiring (concealed on wall & surface/concealed on cealing) for one light/fan/exhaust fan controlled by one modular/piano switch one way in different locations/building including rigid non metallic PVC conduit, medium grade, ISI marked , 20 mm dia, with 1.5 sqmm FRLS PVC insulated & unsheathed, stranded copper conductor of 1.5 sqmm as continuous earth connected to common earth dolly, complete all as specified and directed by Engr-in-charge.

All as per item No 152 above but for 5 Amps 5 Pin socket outlet on the same board -ditto-.

All as per item No 152 above but one 5 pin, 5 Amp socket outlet on independent board not below the switch board of the light point in the same vertical plane complete all as specified and directed by Engr-in-charge.

All as per item No 152 above but One bell/buzzer point controlled by on bell push complete all as specified and directed by Engr-in-charge.

All as per item No 152 above but One light point controlled by two 2- way switches with cables 1.5 sqmm size copper wire complete all as specified and directed by Engr-in-charge.

All as per item No 152 above but one 5 pin, 15 Amp socket outlet on independent board for power point with 2.5 sqmm size copper wire complete all as specified and directed by Engr-in-charge.

S& F ceiling rose, 2 to 3 terminals complete all as specified and as directed .

S&F Modular switch, one way 6 Amps , 1 module complete all as specified and directed by Engr-in-charge.

S&F Modular Socket , 6 A-2/3 Pin combined 2 module complete all as specified and directed by Engr-in-charge.

S&F in replacement of switch modular one module 2 way 6Amps complete all as specified and directed.

S&F twin socket modular type heavyduty out let 6 pin 6/16 Amps 2 module, complete all as specified and directed by Engr-in-charge.

S&F switch Modular type 16 Amps , single pole one way 240 volts one module complete all as specified and directed by Engr-in-charge.

S&F Modular Fan step Regulator Bell ,120 W-2 module complete all as specified and directed by Engr-in-charge.

M&L for metal flush box for fixing of switches for 1/2 module complete all as specified and directed by Engr-in-charge.

M&L for metal flush box for fixing of switches for 3 module complete all as specified and directed by Engr-in-charge.

M&L for metal flush box for fixing of switches for 4 module complete all as specified and directed by Engr-in-charge.

M&L for metal flush box for fixing of switches for 6 module complete all as specified and directed by Engr-in-charge.

M&L for metal flush box for fixing of switches for 8 module complete all as specified and directed by Engr-in-charge.

Supply & fix Modular White cover plate with frame for 1/2 module complete all as specified and directed by Engr-in-charge.

Supply & fix Modular White cover plate with frame for 3 module complete all as specified and directed by Engr-in-charge.

Supply & fix Modular White cover plate with frame for 4 module complete all as specified and directed by Engr-in-charge.

Supply & fix Modular White cover plate with frame for 6 module complete all as specified and directed by Engr-in-charge.

Supply & fix Modular White cover plate with frame for 8 module complete all as specified and directed by Engr-in-charge.

S&F Modular type blank plate , 1 module complete all as specified and directed by Engr-in-charge.

Supply and fix PVC ventilating fan AC single phase 230/240 volts of size 200 mm sweep with louvers and connecting up including provision of cable from ceiling rose to connector to exhaust fan also including make suitable size hole on wall/window as per site requirement. Make : Havells/Bajaj/Usha/Orient/Orision.

Supply & fix sheet metal enclosure for 220 volts 20 Amps with a three pin and earth plug top with socket and one single pole MCB 20 amps complete as well as specified and directed.

S & F single phase, 4 star rated vertical type 25 Ltrs water heater storage type Geyser, with 1.2 Mtr 3 core copper cable with 3 pin metal top 20 amps and inner tank made of glass lined enamel coated with 2 KW heating element with complete acessories. The standing working pressure is 8 bar and suitable for high rise buidings. Make: Havells/Racold/Bajaj/V-Guard.

S&F Sheet metal enclosure DD SPN 240 Volts 04 way DB with 200 Amps rated busbar complete all as specified and directed.

S&F TPN DB 415 Volts 4 way double door type DB complete all as specified and directed.

S & F MCB SP of rating, 06 to 32 Amp,240 volt, 10 KA 'B' Series type complete all as specified and as directed.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base including 9 watt LED lamp complete all as specified and as directed by Engr-in-Charge. Make: Havells /Orient/Syska/Bajaj/Philips

S & F MCB TPN 63 Amps, 415 Volt, 10 KA, 'C' series type complete all as specified and as directed.

M&L for concealed sub main wiring Six run of 06 sqmm PVC insulated unsheathed copper conductor cable ISI marked 1100 volts grade drawn in and including PVC surface conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as directed. Note- (a) Four runs of single core cable with two run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Make disturbed surface good to wall/floors as existing surface.

M&L for concealed sub main wiring three run of 04 sqmm PVC insulated unsheathed copper conductor cable ISI marked 1100 volts grade drawn in and including PVC surface conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as directed. (For AC connection ) Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Make disturbed surface good to wall/floors as existing surface.

M&L for inverter wiring with FRLS PVC insulated cable 2.5 Sqmm copper conductor solid core unsheathed cable in existing conduit complete all as specified and directed.

Supply fabrication, installation & commissioning of dust & vermin proof totally enclosed, Indoor type LT, 3 phase 4 wire feeder pillar box factory made (CPRI approved), double door cubical type of suitable size made by 2.0 mm thick ms sheet with MS angle iron frame of size 40 x 40 x 6mm , front door opening with locking arrangement complete painted with two coats of synthetic enamel paint over a coat of red oxide primer including necessary fixing with PCC 1:2:4 of size 0.3m x 0.3m x 0.6m for 4 Nos legs, inclusive of under mentioned items fixed inside with suitable arrangement vertically operated an internal connection with PVC insulated stranded single core copper cable of suitable size of using insulated copper strip of appropriate size and connection of all incoming and outgoing cable included extended the cable from cable loop if required using aluminium/Copper cable terminal sockets / lugs as required duly crimpled comprising of following: Size of LT Panel box is 1.5 x 1.2 x 0.5 Mtr.

S&F in replacement of 4 ft 18/20 watt Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy complete all as specified and by Engr-in-charge. Make:- Havells/Orient/ Bajaj/Philips/CG

S&F in replacement of 2 feet 09/10 W slim LED battern (cool day light) Basic all purpose surface and wall mounted with polycarbonate housing & integrated with electronic driver..Make:- Havells/Orient/ Bajaj/Philips/CG

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 4 mm dia galvanized earth wire by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15 mm dia light grade GI pipe upto 7.5m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt, necessary excavation in soft/loose soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm bore GI tube of light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1/ RCC 1:2:4 type B-1, pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia connected to earth test point including testing complete all as specified and directed.

S & F MCB SPN of rating 32 Amp, 240 Volt, 10 KA, 'C' series type complete all as specified and as directed.

Supply, laying, testing and commissioning LT UG armoured, XLPE insulated, inner and outer sheathed, PVC insulated with multi stranded aluminium conductor cable of cross sectional area of following size, 1100 volts grade, ISI marked with IS-7098, laid in trenches/floor/duct/wall including aluminium lugs of sizes 95 Sqmm 31/2 core complete all as specified and as directed.

S & F IP 68 protection single phase centrifugal monoblock pump of capacity,5 HP 415 volts, Head Range: Up to 42 metres Discharge Range: Up to 9.7 LPS Power Ratings: 0.37 to 4.5 kW Voltage Range : 380 to 440 volts and suction and discharge range 40 mm x 32 mm complete all as specified. Make : Kirloskar/ Crompton Greaves/KSB

Supply and fixing submersible Pump direct on line starter of capacity 07 KW motor , suitable for 415 volts three phase AC Supply relay range 9 to 15 amp , MN 16 type complete all as specified and directed . Make L&T/ Havell's/Crompton

Supply, installation,testing and commissioning of centrifugal pumping set electric driven all as specified of capacity 30 WHP, 415 vols, 50 Hz, Head range upto 55.36 mtr, discharge range upto 90m3/hours, suction range upto 25 mtr, Power ratting 22 Kw/29.50 HP, suction and discharge range impeller diameter approax 195 mm to 214mm maximum and 165mm minimum complete all as specified and as directed by Engr-in-Charge. Make : Kirloskar/ Crompton Greaves/KSB

Supplying, laying , connecting and testing PVC insulated multistranded unshethed single core submersible copper cable 3 core, 4 mm², woking voltage 1100v ISI marked complete all as specified and directed.

Supply and fixing of Heat resistent flame retardant (HRFR) PVC insulated copper cable, single core of size 10 Sqmm, 1100 volts grade complete all as specified and directed.

M & L for connecting pipelines(delivery, suction,priming, etc.) , electrical connections, accessories/adding the centrifugal pump(motor)set upto 50 hp with proper tools and material including "C"channel from the foundation, keeping aside. . Contructing new PCC (type C1,1:3:6) foundation of suitable size including refixing of new "C' channel of suitable size with proper nuts and bolts complete, installing and commissioning the pump(motor)set with proper arrangement of hydra/Crane machine including fixing of electrical parts as directed and specified by EIC, fixing of new antivibration pads (make-dunlop)- 06 nos below channel frame with suitable size fasteners/bolts, nuts,washers, resetting of suction and delivery pipeline as per pump's suction and delivery position. fixing of bolts, nuts,washers between channel frame and pump. Aligning the axis of pump & motor as specified and recommended by pump manufacturer to avoid any parallel or angular misalignment. Connecting all electrical connectons, checking the pump set for satisfactory working all as directed by Engr-in-Charge.

S&F LT panel /feeder box made out of MS/CRCA sheet 3.15mm thick with MS angle iron frame of size 40x40x6mm out door type front door opening with locking arrangement slinting roof and size of panel/feeder pillar box is 0.6mx0.45 and 0.35 m with out legs including necessary pcc cutting and fixing with pcc 1:3:6 of size 0.3mx0.3mx0.2m for 04 nos legs including necessary insulators and 04 nos copper bus bar of size 30mmx5mm capacity, provn of inlet and outlet cables with glands and earth connecting lead etc complete and connection of all incoming and out going cable using aluminium terminal sockets/lugs duly crimpled and necessary two coats of paints with approved colour and grade of first quality synthetic enameled paint over a coat of red oxide primer including necessary preparation of surfaces all specified and testing complete including the following :- (i) S&F MCCB 4 pole 415 volts 125 amps 16 KA - 01 No. Make Legrand /Siemens/schiender (v)Supply and fixing 32 amps TPN MCB Make - Legrand/Siemens/schiender =01 No (vi)Supply and fixing of Fully automatic star delta starter of capacity 40 HP, relay reange14-23A, 415 volts, 50 Hz of L&T Cat Part-II order No SS94364.

Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm X 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion . (Concrete pit shall be 20 cm to 30 cm away from main pit).

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out soft/loose soil for foundation of stay, laying of cable etc. complete all as specified and as directed.

Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Material and labour for fly ash/burnt Bricks, sub class 'B' dry, well brunt bricks laid in trenches for cable protection all as specified.

M&L for sand filling in trenches for cushioning of cable complete all as specified and directed. Note:- Compacted / punned thickness shall be measured for the purpose of payment.

Supply and laying 40 mm bore galvanised iron tubing, light grade with all fittings for passing of cables under ground complete all as specified and as directed.

Note:- The amount of Rs 38582/- against Schedule of Credit on Page No 162 & 163 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

JAIPAL AND BROTHERS