DFE6B

Amount

MILL HOUSE

Repair of cane un-loader grab arms

Replacement of cane cutting knives of chopper

Replacement of cane cutting knives of swing type cutter

Replacement of fibrizer hammers with tip

Replacement of Domite tips

Dismantling, fabrication & erection of mills juice tray (M.S. Plate)

Fabrication of SCC and inter carrier chain’s rake.

Repair of Secondary Cane Carrier & inter Carrier Chain’s rake.

Hard facing of TRPF rollers

To build mills top rollers square end as per standard size

To build mills roller crown pinion teeth as per standard template of teeth.

-do- but mill roller coupling square section as per standard size

Fabrication of TRPF juice tray

Fabrication of TRPF top roller cover

Dismantling, fabrication and erection of Donnelly chute of mills

Modification of Cush Cush DSM conveyor perforated trough along with dismantling and fitting of conveyor and drive system.

To build up the TRPF roller journal as per standard size.

To build up the mill roller journal as per standard size.

Fabrication and erection of mill roller crown pinion guard

Fabrication and erection of TRPF roller crown pinion guard

Complete repair of TRPF pressure chute including replacemnet of worn out SS plate

Installation & commissioning of (01 no.) DSM Screen and re-commissioning of existing 02 nos DSM Screen along with new arrangements of Juice Distribution Gutters/Pipe line complete in all respect.

Fabrication and erection of Juice Trough Conveyor of DSM Screen

Fabrication of Mill top roller scrapper assembly as per existing size & design

Fabrication of discharge roller scrapper assembly.

Replacement of worn out bottom boot of inter carrier chain.

BOILER HOUSE

Fabrication of RBC slats made out from 3 mm thick plate for both RBC Chain

Repair of RBC slat

Replacement of Cast Iron Furnace chute of J.T. and Texmaco Boilers.

Replacement of M.S baggase chute of J.T. and Texmaco Boilers.

Replacement of worn out furnace door of J.T. boilers without frame

do - but door frame

Repair & fitting of furnace door of Texmaco/J.T boiler

Fabrication of steam drum partition Plates of Boilers

Repair of steam drum partition Plates of Boilers

Replacement of worn out casing /ducting of boiler & wet scrubber

Repair of ID fan of J.T & Texmaco boiler

Boiler damper - Dismantling

Boiler damper - Fabrication

Boiler damper - Erection

Replacement of RBC gear & motor bed along with strenghtning of bed base structure of Texmaco bolilers

Repair of FD fan of J.T & Texmaco boilers

BOILING HOUSE

Replacement of worn out various types of juice pump strainers and of lime pumps, un-sulphured, syrup pump

Complete replacement of worn out save-all of Evaporator bodies in all respects.

Complete replacement of worn out save-all of Pans complete in all respects.

Replacement of worn out vapour pipe of various sizes of pans going to condenser

Dismantling of Existing Semi-Kestner Vapourducting and Fabrication, erection of New Vapour ducting

Modification of Umbrella of Semi-Kestner

Replacement of Upper half Shell of Evaporator No 03

Replacement of worn out steam/general coil of Ordinary design : size - 1/2" to 3"

Replacement of worn out steam/general coil of Ordinary design : size - 4" to 6"

Replacement of worn out steam/general coil of Pure circular design: size - 1/2'' to 3''

Replacement of worn out steam/general coil of Pure circular design: size - 4" to 6"

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 900 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 1100 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 1250 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 900 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 1100 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 1250 mm

Replacement of gutters - Dismantling

Replacement of gutters - Fabrication

Replacement of gutters - Erection

Replacement of Callendria alongwith Tube Plates of Evaporator No 02. Include Fitting of Tube Plate, All Connections,Except Fitting of SS Tubes Complete in all respects

Replacement of worn out stirrer arms (Straight Type)

Replacement of worn out stirrer arms (Worm Type)

Replacement of worn out Umbrella of pans

Replacement of Vaccum Crystallizer Shell, which includes all connections,gear box fitting,fabrication and erection of Stirrer Arms with shaft

Replacement of all pipeline of Sulphur Burner Cooler Complete in all respect

Replacement of all pipeline of Sulphur Burner Cooler in side pipeline

Replacement of Wornout after Burner of Sulphur Furnace i.e including the replacement of internal pipe line also

Dismantling, fabrication and Erection of Sulphur Burner Melter of Sulphur Furnace

Replacement of Wornout Bagacilo Pipeline made out from G.I Plain Sheet of Standard Size

Replacement of Y Type Steam Connection for Syrup and Molasses Tanks at Pan Stations

Replacement of Vaccum Filter Agitator

Fitting and modification of planetary gear box along with dismantling of existing gear system 80T

Fitting and modification of planetary gear box along with dismantling of existing gear system 60T

Fitting and modification of planetary gear box along with dismantling of existing gear system 40T

CENTRIFUGAL HOUSE

Replacement of Hopper trough

Replacement of complete portion of hopper tray

Replacement of molasses chute of Continuous Centrifugal machine

Replacement of molasses chute of Batch type Centrifugal machine

Modification of cooling coil of over head crystallizer in to air cool type

Replacement of any worn out shell portion of pug mills/magma mixers

Fitting the complete magnetic separator system at Sugar Hopper tray.

POWER HOUSE

Fabrication & erection of cable tray

Replacement of Thimble (Any Size)

Checking of cable connections, cleaning of thimbles & reconnection

Replacement of switches/MCCB 630 AMP, 400 AMP, 250 AMP

Replacement/erection of changeover switch 630 AMP/400 AMP/ 250/ AMP

Riyajul Contractor