SPECIAL REPAIR TO BLDG NO P-01 (JCOS MD ACCN) AT PALERAM ENCLAVE OF 3 JAKLI

Amount

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) nxc 1.50 sqm each all as specified and directed.

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each all as specified and directed. (as in doors).

M&L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate in bed blocks for hold fast and back filling of pressed steel frame etc complete all as specified and directed.

S&F mild steel framed work just as doors, ventilators, and as in hold fast,ladders, railings, Framed Guard bar, railings etc with ends of bars shouldered and/or riveted welded hinged and similar work Conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-In-Charge.

S&F mild steel work as in hand rail,half round or other steel section,drilled and counter sunk for balusters running bars and similar work including all necessary drilling,welding etc conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 8 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) Two coat of red oxide primer to MS window and guard bar Note: Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. (a)10mm Sq Guard bar 10Cm C/C (b)Two coat of red oxide primer to MS window and guard bar Note: Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each ventilator) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge.

Material and Labour glazed skeleton shutter for door 35mm thick 2nd class hard wood(Hollock) open rebated prepapred to receive glass, guage etc ( without sash bars) edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section 8 Clause 8.24(a) complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

Supplying and fixing factory made Solid PVC Moulded Door shutter with wood free EPS, 28-30mm thick (stiles), with 2 or 4 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-In-Charge

S&F floor door stopper of aluminium alloy body and tongued,anodised,with hard drawn steel spring,fixed complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S & F 150mm aluminum handles, cast type, anodised etc complete all as specified.

S & F 200 mm aluminum anodised barrel tower bolts of extruded sections and fixed complete.

S & F 150 mm aluminum anodised barrel tower bolts of extruded sections and fixed complete.

S & F butt hinges 100 mm size medium weight cold rolled mild steel(zinc chromate coating)complete all as specified and directed.

S&F 250mm mild steel sliding door bolts aluminium alloy anodised, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified.

S & F 300mm ordinary rat rail rod pattern springs,including roller and roller plate complete all as specified

M&L for 18-19 mm thick Pre-laminated Particle board,interior grade,Prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws including drilling making good complete all as specified and directed by Engr-In-charge.

M&L for external teak wood lipping 6mm thick over particle board 18/19 mm thick complete fixing,making edge complete all as specified and directed by Engr in Charge.

S&F Hasp & staple 125mm aluminium anodised complete all as spd and directed.

M&L for continuous mild steel piano hinges bright finish electrogalvanised with width of flaps when open 30mm complete all as specified and directed including welding and finishing and making surface clean.

Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes complete all as specified.

Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane complete all as specified and dircted.

M & L for two coats of synthetic enamel paint over one coat of primer (Pink Primer) on new wooden surfaces exceeding 10cm width or girth including preparation of surface complete.

M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on one coat of primer (Red oxide Zinc crown) incl preparation of new surfaces complete.

Supply and fixing PVC coated curtain rods 25mm dia including, brackets to hold the rod & a set of ABS finials ( as per sample kept in GE's office) of approved quality & appropriate qty of ABS plastic rings complete all as specified .

S&F in reapir 20 mm bore dia gate valve,gun metal with iron wheel head, screwed both ends and fixed all as specified and directed.

Supplying and fixing in repairs PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle including 32mm dia of PVC(Heavy duty) flush pipe including brackets complete all as specified.

S&F in repair rotational moulded polyethylene water storage tanks white colour triple layer (cylindrical vertical with closed top) hoisted and fixed in position 500 ltr including fixing 20mm dia float valve all as specified and directed.

S&F in repair glass shelf assembly Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F in repair brass chromium plated tubular towel rail,20mm dia,D-type 60 cm long between flanges all as specified and directed.

Demolition of brick work built in cement mrtar complete all as specified and directed.

M&L for brick work using sub class ‘B’ bricks, straight or corved on plan exc. 6 mean radius in CM 1:6.

All as per ser item no 35 above but except bricks.

M&L for brick work using sub class ‘B’ bricks, straight or corved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

S&F in repair vitreous china squatting pan (orrisa pattern) size 580x440 mm(white) with CI 'P' or 'S' trap, intehral foot rest including trap set include complete concrete & flushing pipe complete all as specified.

Supply and fixing in repair vitreous china wash hand basin(white) flat back, WITH PADESTAL, of size 550 x 400 mm including bracket, CP waste coupling 32mm, waste pipe, chain, plug and porcelein stopper complete all as specified.

S & F sink made of stainless steel 1mm thick with plug washer and waste coupling, waste pipe including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowel size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair stainless steel plate Rack of size 750x750x250mm with folded edge gloss finish complete all as specidied and directed.

Taking down G.I tubing 15mm bore including connections & clearing for re-fixing or removal to store.

All as per ser item no 43 above but 20mm dia

S&F 15mm bore G.I tube medium grade freed to wall or under floor complete including cutting chases and make good in CM 1:3 complete.

All as per ser item no 45 above but 20mm dia

M&L for PVC connection 45cm long superior quality with PTMT nut on both side .

Demolition of 100 mm dia AC drain pipe complete pipe complete all as specified.

S&F PVC (SRW) pipe 110 mm rain water pipe single socketed in any length with rubber ring joints,fixed to walls with minimum three no clamps fixed etc complete all as specified and directed.

S&F 110 mm PVC (SRW) bends any radius complete all as specified and directed

M&L Intergral Water Proofing compound complete all as specified and directed.

Supply and fixing in repair bib tap long body fancy type 15mm dia chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S&F 15mm bore stop cock concealed as in repair long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle.

S&F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S & F Pillar tap as in repair, fancy type cast copper alongwith capstan heads, chromium plated, swan neck, screwed down high pressure, with or without coppered ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe size 15mm.

Supply and fixing in repair 125mm dia, Brass chromium plated, shower rose with swivel joint fixed to GI pipe, complete all as specified.

Taking down cement plaster from wall’s/ceiling including raking out joints hacking for key scrubbing down with water complete.

M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces incl wpc as per manufacturer instrn. Finished the surface even and smooth without using extra cement. WPC shall be measured & paid separately.

M& L for 10mm rendering in cm (1:3) on ceiling surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall complete all as specified.

Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer of chalk whitening on walls complete all as specified.

Material and Labour for complete removal of existing treatment by wire brushing and washing, rubbing down and stopping of surfaces and applying two coats of oil bound distemper on walls complete all as specified.

Material and Labour for complete removal of existing treatment by wire brushing and washing, rubbing down and stopping and preparing of surfaces and applying two coats of cement base paint complete all as specified.

Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified.

Material and Labour for preparation of old decorated plastered surfaces and applying two coats of white wash on ceiling complete all as specified.

M&L for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in rounded or chemfered all as specified and directed.

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

M & L for coloured (non skid) ceramic joint less tile of size 400x400x6-7mm thick over and incl 15mm thick cement screed in CM(1:6) set and jointed in neat cement slurry and pointed with white cement(over floor,skirting,almirah and shelves etc) mixed with pigment to match the colour of tiles complete all as specified.

M & L for ceramic glazed coloured printed tiles(some portion highlighted with contrast colour) of size 300 x450 x 6-7 mm thick on and incl 10mm thick Rendering in cm (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting / dado complete.

M&L for rounding or chamfering to granite/stone slabs one edge,such as in steps,cooking platform,and other similar situations and making smooth complete all asspecified and directed.

M&L 18 to 20mm thick for machine cut green marble over riser,steps of stairs and skirting stone grinded & polished top of stone to achieve mirror finish complete all as specified.

M&L 16 to 18 mm thick granite slab as in floor,cooking platform,window cills,jambs,etc machine cut flooring incl 15mm thick cement mortar 1:6 set and jointed in neat cement slurry and pointed with coloured cement mixed with pigment to match the shade of slab incl cutting rubbing and polishing incl nosing to the edge of granite stone slab complete all as specified and directed by Engr-in-Charge.

M&L 16 to 18 mm thick granite slab as in floor machine cut in skirting/dado laid ove 15mm thick cement mortar 1:4 set and jointed in neat cement slurry and pointed with coloured cement mixed with pigment to match the shade of slab complete all as specified and directed by Engr-in-Charge.

M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in landings,cover slabs for manhole etc,water tank base and similar work complete all as specified and directed including demolition of existing RCC.

M&L for RCC (1:2:4) type B-0 using 12.5mm graded aggregate as in slabs supported on walls,beams and columns in floors,roofs,landings,deck slabs,balconies and in shelves including chase cutting and hooking/welding to existing RCC and like including demolition of existing reinforced RCC .

M&L for RCC (1:2:4) type B-1 using 12.5mm graded aggregate as in stairways,including steps,staircase railing,filling for exposed reinforcement to ceiling and similar work etc and work of similar type complete all as specified and directed.

M&L for form work to soffits of suspended slab such as roof slab,Floor slab, shelves and chajjas,down slab, etc and similar work making surface fair finished complete all as specified and directed by Engr-In-Charge.

M&L for formwork to staircases steps including risers and stringers and similar work complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of PCC as in ground floor & Paving nxc 15cm (Below or above) ground level including disposal of rubbish to a distance nxc 500mtr where directed.

Demolition of PCC as in ground floor & Paving exc 15cm (Below or above) ground level including disposal of rubbish to a distance nxc 500mtr where directed.

M&L for cement concrete type F2 1:7:12 (40mm graded aggregates) as in sunken floor all as specified and directed including demolition of PCC.

M& L for 10mm rendering in cm (1:3) as in sunken portion surfaces using WPC as per manufacturer instrn. Finished the surfaces even and smooth without using extra cement complete all as specified and directed.

S & F in repairs 32mm dia GI pipe in spout of sunken floor all as spesified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof and sunken portion on bitumen surfaces by forced application complete all as specified.

M&L for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in 50mm thick plinths protection and as in path complete all as specified and directed.

S & F machine pressed factory made precast coloured chequered cement concrete tile 30 cm x 30 cm x 25 mm thik set,jointed & pointed in neat cement slurry with grey cement and pigment in floor including screed bed 20mm thick in CM 1:6 bedded and jointed complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 20mm graded aggregate as in sub base of flooring complete all as specified and directed.

Dismantling cast iron pipe any dia fixed to wall/floor with any type of joints complete all as specified and directed.

S&F in repair 100mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors in repairs.

S&F in repair 100mm cast iron soil,sand cast pipes,waste and vent pipes in any length with or without ears, with cement joints,fixed to walls complete all as specified and directed.

S&F 100mm dia cast iron bends and diminishing pieces or tapers in repairs.

S&F in repair 75mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with clamps

S&F in repair 100mm cast iron bends diminishing pieces or tapers with oval access oval in repairs.

S&F cast iron Cowls 100 mm bore complete all as specified and directed.

M&L for 100mm dia cast iron floor trap,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) using 20 mm graded stone aggregate complete all as specified and directed.

S&F in repair cast iron cross tee, 100 mm dia equal or unequal fixed with lead joint complete all as specified and directed.

S&F 1.00 mm thick back sheet in steel gates,mumty,and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified.

M&L for repair to RCC Chajjas, roof projection edges, hanging part of chajjas, edges of chajjas, RCC parapets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl necessary renforcement 8mm to 12mm TMT bars , form work , MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings making edges fair and even and smooth etc completed all as specified and directed by Engr-in-Charge.

M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in levelling cource in roof finishes etc and similar works over stair steps even and smooth without using extra cement incl cleaning of algae /dirt with wire brush before treatment complete all as specified as directed.

M&L for applying two coat of undiluted thick water based UV resistant elastorneric Polyurethane liquid membrane with UV resistance properties and solar refelctive properties of 109 over one coat of primer (1:3, Dilution:water) Note: Every each coat interval between 6 hrs) ,having solid content more than 80% and elastic recovery @150% elongation %---70 to 75 . complete all as specified and directed.

Supplying and fixing 18mm thick solid PVC board in cup board shelves, shutters etc complete all as specified and directed of approved make.

All as per Srl Item No. 104 here-in-before but board with one side prelam as in cabinet shutters including self closing hinges 40mm size 02 Nos per shutter, handle 75mm long stainless steel 01 no per shutter for each shutter complete all as specified and directed of approved make.

Supplying and fixing PVC sheet 5mm thick, in backside of kitchen cabinets complete all as specified and directed of approved make.

M&L for demolition of reinforced cement concrete including cutting of reinforcement as in shelves and similar suspended work complete all as specified and directed.

S&F for 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality (size/frame of board, design of bd, type of print on sheet, size of studd, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet ) complete all as specified and directed incl dismantling of existing damaged sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm and stainless steel of grade A-ISI 304(1818).

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5m deep and getting out complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25cm thick complete all as specified.

Removal of surplus soil to a distance not exceeding 50 metre away and depositing where directed at a level not exc 1.5m above the starting point ,complete all as specified and directed.

Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated, FRLS unsheathed and multi stranded copper conductor cable in old PVC Concealed conduit for one light / fan /bell point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick plastic laminated sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed. Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)

All as per Srl item No 113 above but for one 5 amps socket out let independent complete all as specified.

All as per Srl item No 113 above but on the same board completeall as specified

All a per item No 113 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement switch type regulator 5 step 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing in replcement of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65X50 mm two to three terminals complete all as specified.

Material and labour for replacement of lamp holder insulated body with back plate batten/angle type for batten fitting with LED Bulb 230V AC 10 watt cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

Supply and fixing in replacement of MCB single pole 6 to 32 Amps all as specified and directed

S & F in replacement of MCB 40 amps single pole with neutral, AC 230 volts complete all as specified and directed.

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply and Fixing in replacement of bell push 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 125 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

All as per Srl item No 130 above but for 4 sqmm

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia.

Supply and fixing ceiling fan 1200mm Sweep copper winding high speed, Aluminium body with blade, double ball bearing of BEE star rated Including all acessories connector, canopy, Hanging Rod and clamps, including electric connection with pvc flexible twin core copper wire from ceiling rose to ceiling fan complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) LT 1100 volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Supply and fixing in replacement of LED T-8 tube light box type fitting with single side connection LED tube rod 22 watt, 4 feet MS CRCA box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

Supply & fix in replacement of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. Note: Contractor will give gurantee certificate for 01 years and replace complete item in case of any fault. No extra cost will be paid to the contractor for the same.

Supply and fixing in replacement of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

Sand cushioning to cable with dry fine sand in trenches 8cm below the cable and 15cm above the cable after laying complete all as specified.

M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified

Supply and fixing in replacement of bell Ding Dong AC 230 volts complete all as specified and as directed

Taking down the ceiling fan/Exhaust fan in situ and refixing after servicing, repairing and painting to ceiling fan/Exhaust fan including exhust fan louvers , scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint all as specified and directed.

Taking down Geyser any type in situ and refixing after servicing, repairing and painting including scratching old paint and preparation of surface for painting with one coat of white enameled paint all as specified and directed.

M/s MAHAJAN CONSTRUCTION CO.

tarlok singh contractor

Jaspal Construction Co.

m/s. gopal krishan