REPAIR TO PLINTH PROTECTION SUNKEN PORTION AND NAHANI TRAPS HARD STANDING AND PATH IN MD ACCN AND OTM IN ZONE II AREA UNDER GE MCEME SECUNDERABAD

Amount

Demoltion of cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-Charge.

M & L Rendering 15mm thick in CM (1:3) on concrete floor surfaces mixed with integral water proofing compound finished even & smooth without using extra cement. Note : WPC shall be measured & paid separately

M & L for PCC 1:4:8 type D2 using 40mm using graded stone aggregate as in foundations, filling in sunken portions and mass concrete complete all as directed by Engr-in-charge.

M&L for 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as directed by Engr-n-Charge.

M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surfaced by forced applicaion complete all as specified including removal of existing treatment complete all as specified and as directed by Engr-in-Charge.

Supply only Integral water proofing compound

S&F in repair PVC (SWR) 100/110 mm bore single socketed pipes in any length with rubber ring joints fixed to wall height upto 12 mtr with clamps complete all as specified and directed.

S&F in repairs PVC(SWR) bend/shoe for 100/110 mm dia complete.

S&F in repairs PVC (SWR) 75 mm dia floor trap, plain with grating including jointing with solvent cement and connecting to existing lines complete all as specified and as directed

S&F in repairs PVC (SWR) gully grap 125/110 mm setting and jointing with solvent cement and preparation of trap hole complete and connecting necessary connections all as directed by Engr-in-Charge

Dismantling of floor hearth or wall tiling including cement mortar bedding complete all as directed

M&L for PCC 25 mm thick type B1 1:2:4 (20 mm graded agg ) as in sub base .

M&L for 15mm thick screed bed or bedding layer of mortar CM 1:6 for laying of floor finished all as directed

M&L for non skid ceramic coloured dark shade tiles 7 to 8 mm thick area of each tile exc 0.060 sqm but not exc .11sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed

M&L for rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 all as directed

M&L for Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 150mm

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 200 mm

M&L for 150 mm internal dia of reinforcd concrete pipes class NP-2 with one coller per length of pipe all as directed by Engr-in-Charge.

M&L for 200 mm internal dia of reinforcd concrete pipes class NP-2 with one coller per length of pipe all as directed by Engr-in-Charge.

M&L for Concrete bed to 150 mm bore dia drain pipes including packing under haunching against the sides of pipes with concrete after they are laid and tested; in set in CM 1:4:8 type D-2 all as directed

M&L for Concrete bed to 200 mm bore dia drain pipes including packing under haunching against the sides of pipes with concrete after they are laid and tested; in set in CM 1:4:8 type D-2 all as directed

Excavation in trenches n.exc 1.5 m deep and getting out in hard/dense soil complete all as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing of excavated materials exc 1.5 km but n.exc 5 km and deposited and where directed.

Pumping out sewage water /sludge from septic tanks/soak wells/ sumps /Man holes etc of any dia by means of mechanical operated equipments /trolley mounted browsers duly taking all precautionary measures and removing sludge/water out side and away from the MD land ( working in fowl condition) complete all as specified and directed

S & F in repairs, vitreous china squatting pan, 'orissa' pattern of size 580x440mm white, with integral foot rests including concrete bedding & inc. CI 'P' trap, 100mm, complete all as apecified

S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200/150mm dia pipe complete all as specified and as directed.

M& L for rendering 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces finsished even and smooth without using extra cement including taking down cement plaster.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on surfaces of walls

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL)

M&L for 75 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate)

M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment .

M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes.

M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments.

M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) for coping or chamfered on edges .

M & L 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work of any description and in any position not otherwise specifically provided for

M&L for old size brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in 1:6 complete all as directed.

M& L for rendering 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finsished even and smooth without using extra cement .

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm.

S&F in repair 15mm dia brass Stop valves screwed down, high pressure, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repair 15mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair 15mm bore Bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed .

S&F in repair Vitreous China Urinal, Half stall type, white with push type tap all as specified excluding flushing pipe and waste pipe .

S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified, complete all as specified and as directed by Engineer-in-Charge. (Make : Jaguar)

S&F in repair PVC waste pipe, 40mm dia for sink, complete all as specified and as directed by Engr-in-Charge.

S & F in rep Grating doom 100mm dia of PTMT (Minimum weight 25gms), etc complete all as specified and as per directed by Engineer-in-Charge.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed complete to wall or in floors etc .

S&F in 20mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed complete to wall or in floors etc.

NAGESH CONSTRUCTIONS

abhilasha constructions

SAI RAM CONSTRUCTIONS

NEWS CONSTRUCTIONS

AMK Builders

M/S NOVA CONSTRUCTIONS

M/S C MALLIAH & SONS

B AND H CONSTRUCTIONS

BSA INFRA