Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.8 L+₹9.0 L (28.2%)Rejected-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L2 | Rejected-Finance L2 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Sept 2024, 6:00 pmClosed
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
SEWAGE AND DRAIN CLEANING AND REPAIR TO SEWAGE LINE MANHOLES AND ALLIED SERVICE UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2024_MES_661525_1
GE/JULL/ET-11/2024-25
Open Tender
Civil Works
Item Rate
335 days
Jalandhar Cantt
As per tender document
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹90,000
Yes
15 Oct 2024
25 Jul 2024
25 Sept 2024
25 Jul 2024
17 Sept 2024
8 Aug 2024
Amount
M & L for Cleaning/Removal of blockage of floor traps/Nahani Traps of 75mm/100mm bore in kitchen/ Bathrooms/Toilets etc up to 1st Manhole including of taking down PVC/Stainless trap grating and refixing the same with white cement with pigment to match the surface as before or any other associated/related complaints not mentioned under this item and will be done as directed by Engr-in-charge. Note :- (a) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (b) Complaint will be done within 48 hours from the complaint date. (c) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done. (d) Measurement can be repeated if blockage is occured more than one time.
M & L for Cleaning/Removal of blockage of Gully traps up to 1st Manhole of any size and any depth including Removing RCC Manhole covers and refixing the same as before any other associated/related complaints not mentioned under this item and will be done as directed by Engr-in-charge. Note :- (a) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (b) Complaint will be done within 48 hours from the complaint date. (c) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done. (d) Measurement can be repeated if blockage is occured more than one time.
M & L for Cleaning/Removal of blockage of Orissa/Europian Pattern WC 'P'/S trap and making fuctional up to 1st Manhole and including removing EWC and cleaning the traps completely and making functional and refitting the EWC in same position including making good the disturbed surfaces with white cement and pigment to match the existing surface or any any other associated/related complaints not mentioned under this item and will be done as directed by Engr-in-charge. Note :- (a) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (b) Complaint will be done within 48 hours from the complaint date. (c) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done. (d) Measurement can be repeated if blockage is occured more than one time.
M & L for Cleaning /Removal of blockage up to 200mm bore SGSW/RCC pipes mechanically with combined high pressure water jetting cum super suction (Vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water jetting, high pressure vacuum and provn of hydraulic application through high pressure thermoplastic fibre based water jetting hose and through conical round shape nozzles pipe and flushing after cleaning/clearing of sewage line including removing RCC Man hole cover and refixing the same as before complete all as specified and directed by Engr-In-Charge. Note:- (a) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (b) Complaint will be done within 48 hours from the complaint date. (c) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done. (d) Measurement can be repeated if blockage is occured more than one time. (e) Length of pipe will be measured from manhole to manhole in RM for payment purpose after satisfaction of Engr-in -Charge.
Ditto, All as per Item No. 4 above, but 250mm dia complete all as specified and directed
Ditto All as per Item No. 4 above, but 300mm dia complete all as specified and directed
Ditto All as per Item No. 4 above but 450 mm dia complete all as specified and directed
M & L for Cleaning /Removal of blockage from 150 mm up to 600mm bore SGSW/RCC pipes mechanically with combined high pressure water Jetting machine mounted on LCV/HCV and having facilities of high pressure water jetting, flushing after cleaning/clearing of sewage line including removing RCC Man hole cover and refixing the same as before complete all as specified and directed by Engr-In-Charge. Note:- (a) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (b) Complaint will be done within 48 hours from the complaint date. (c) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done. (d) Measurement can be repeated if blockage is occured more than one time. (e) Length of pipe will be measured from manhole to manhole in RM for payment purpose after satisfaction of Engr-in -Charge.
M & L for Cleaning/clearing of sewer line from 150mm up to 600 mm bore under ground by removing any type of blockage including desilting, descaling and de-chocking from sewage line Manually using roding/Flexible pipe by any means and flushing after cleaning/clearing of sewage line. The entire sludge water shall be disposed off out of Defence land complete all as specified and directed by Engineer-in-Charge. Note :- (a) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (b) Complaint will be done within 48 hours from the complaint date. (c) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done. (d) Measurement can be repeated if blockage is occured more than one time.
Cleaning of manholes mechanically by using suction (vaccume) machine including getting out sludge/ waste from manholes and well flushing after cleaning, removing sludge/ waste to low lying area clearing the inlet and outlet pipe mouth, etc (depth of MH n.exc 1.5m) complete all as specified and directed. Note : (a) Contractor will arrange sewer jetting machine & suction machine/Super Suction Machine having high pressure power to clear sludge from sewage line from 200 to 450 mm dia without any extra cost. (b) No manual work will be allow to clear the septic tank/soakage well and manholes. (c) Measurement will be done from manhole to manhole. (d) Measurement can be repeated if blockage is occured more than one time. (e) Contractor/Supervisor shall collect all complaints from complaint cell within 24 hours. (f) Complaint will be done within 48 hours from the complaint date. (g) If any complaint not done within 48 hours, then Rs. 500/day recovery will be charged against every complaint until complaint done.
Ditto all as per item No 10 above, but depth of MH exc 1.5m and not exc. 3.00 m complete all as directed.
Ditto all as per item No 10 above, but depth of MH exc 3.00m and not exc. 8.00 m complete all as directed.
M & L for Dewatering/desilting of existing Septic tank/ Soakage Well incl removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature, Using suction pump up to any depth by working under foul condition and disposal of the same in out of MOD area by using trolly mount container, compolete all as specified and directed by Engr-in-charge.
Earth work excavation by mechincal means (Hydraulic excavator) means over areas (not exceeding 1.5m in width or 10 sqm on plan), inlcuding dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil as directed, within a lead of 50m complete all as lan and getting out complete all as specified and directed.
Ditto all as per item No. 14.00 above, but depth exc. 1.5m and n. exc. 3.0m.
Ditto all as per item No. 14.00 above, but depth exc. 3.00 m and n. exc. 4.5m.
Ditto all as per item No. 14.00 above, but depth exc. 4.5 m and n. exc. 6.00m.
Ditto all as per item No. 14.00 above, but depth exc. 6.00 m and n. exc. 7.50m.
M&L cement concretre type D2 1:4:8 (Using 40mm graded stone aggregate) as in foundations and mass concrete complete all as specified and as directed.
Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer, complete all as specified and as directed.
Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and as directed.
Demolition of brick work built in cement mortar of any description complete all as specified and as directed.
M&L brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:4) complete all as specified and as directed.
Ditto all as per item No 23 above but except bricks, complete all as specified and as directed.
Taking down cement plaster of any description including racking out joints for key scrubing with water etc.
M & L for rendering 15mm thick in CM 1:3 on internal brick or concrete surfaces finished even and smooth without using extra cement with WPC ( WPC shall be measured and paid separetely).
M&L rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed on surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately).
"Supply only" liquid water proofing compound (ISI Marked) all as specified.
M&L for two coats of cement base paint on wall over a coat of primer to newly plastered surface including preparation of surface complete.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.
M&L pre cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Manhole cover slab set in CM 1:4 complete all as specified and as directed.
S&F TMT bars 8mm dia cut cut to length bent to shape required including binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed
M&L for Providing PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in coping , benching/haunching , slightly rounded or chamfred angle and throating etc, all as directed .
M&L MS work as small articles for handles, holdfasts, steps, rungs, etc knee piece and similar small article complete all as directed.
Demolition and breaking up drain pipes of 150mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified.
Concrete bed to drain pipes including packing under and haunching against the sides of pipes after the air laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 150mm dia complete all as specified.
M&L Reinforced concrete pipes 150 mm bore of pipe, class NP2, laid, jointed and tested with collars, complete all as specified and as directed.
Demolition and breaking up drain pipes of 200mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as directed.
Concrete bed to drain pipes including packing under and haunching against the sides of pipes after the air laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 200mm dia complete all as specified and as directed.
M&L Reinforced concrete pipes 200 mm bore of pipe, class NP2, laid, jointed and tested with collars complete all as specified and as directed.
Demolition and breaking up drain pipes of 300mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as directed.
Concrete bed to drain pipes including packing under and haunching against the sides of pipes after the air laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 300mm dia complete all as specified and as directed.
M&L Reinforced concrete pipes 300 mm bore of pipe, class NP2, laid, jointed and tested with collars, complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for refixing or removal to store complete all as directed.
S&F PVC (SWR) pipes110mm bore single socketed in any length with rubber ring joints fixed to walls or trenches or floors, complete all as specified and as directed.
S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls or trenches or floor,complete all as specified.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.
S&F PVC (SWR) junction single (Single T) 110mm bore complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
M&L cutting into existing manholes for connecting 100mm bore new drains by cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and as directed.
M&L for racking out joints/pointing for drains walls with taking out Brick Bat, Pebbles, Silts, Muds, Clay, Sludge, grubbing up bushes etc. from the bottom of Drains and Culvert Bed etc and removing the same to outside the Defence land in any vehicles, complete all as specified and as directed.
Dismantling 75mm/100mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as directed.
M&L 100 mm bore Cast iron Sand cast pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed .
M&L in repairs for cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe fitted with oval access doors complete all as on specified as directed.
S&F in repairs for cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore pipe fitted with oval access doors complete all as specified.
S&F in repairs for cast iron branch pipes, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore pipe fitted with oval access doors complete all as specified.
M&L 100 mm bore, cast iron bends (any radius) with duck's foot or heel rest complete all as specified.
M&L for 100 mm bore, cast iron socket (double) collars complete all as specified.
Supply and fixing CI Tikki 100 mm bore including gasket, nut bolts complete all as specified.
M&L 75 mm bore Cast iron Sand cast pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed .
M&L in repairs for cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) for 75 mm bore pipe fitted with oval access doors complete all as specified and as directed.
S&F in repairs for cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe fitted with oval access doors complete all as specified.
S&F in repairs for cast iron branch pipes, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe fitted with oval access doors complete all as specified.
Supply and fixing CI Tikki 75 mm bore including gasket, nut bolts complete all as specified.
M&L for salt glazed stonewere gully traps, square or round mouthed 150 x 150 mm size type 'P' including cast iron cover grating and setting and jointing to drain pipe in Cement Mortar 1:1 complete all as specified and as directed.
S&F cast iron floor trap with grating including jointing to waste pipe in run lead joint fixed in cement concrete type (1:2:4) type B-1 diameter of outlet 75mm, complete all as specified and as directed.
S&F mild steel CP grating 125mm dia with centre hole all as specified and directed by the Engr-in-Charge.
S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed. Make:- Parryware/ Hindware/ Cera.
S&F vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed. Make:- Parryware/ Hindware/ Cera.
S&F for Vitreous China wash down water closet white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top including fixing bolt Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device fixed complete all as specified and directed. Make:- Parryware/ Hindware/ Cera.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed.
M&L non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including neat cement slurry complete all as specified and directed. Make:- Somani/ Kajaria/ Johnson.
M&L glazed ceramic coloured tiles (premium quality) of size 450 x 300 x 7mm thick as on vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) to receive tiles complete all as specified and directed. Make:- Somani/ Kajaria/ Johnson.
Grubbing/ uprooting of trees less than 10cm dia , grass, bushes etc from brick wall/roof tiles or any other surfaces of building including dismantling the required brick work/ roof tiles/ mud concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete (1:2:4) type B-1 after pouring the chemical (which destroy the growth of vegetation to the place where vegetation removed). The rate shall include for scaffolding or any other arrangement required during this process upto 10 mtr height complete all as specified.
S&F in repairs for precast SFRC manholes covers & frames in circular type (as per IS 12592) Heavy duty for clear opening 300/400mm complete all as specified and directed
Ditto all as per item No. 76.00 above, but 450/500mm.
Ditto all as per item No. 76.00 above, but 600/650mm.
Cutting of grass, growth/ vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/ manholes in any location or condition all as specified and directed.
B.P CONSTRUCTION CO (BID ID -3085710)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .