REPAIR/MAINT OF AREA DRAIN, COMPOUND WALL, GATE AND CERTAIN MISC WORK AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

Demolition of brick work and stone/ boulder masonary built in cement mortar and lime mortar.

M/L for modular Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:4)

M & L rendering 10mm thick on other than fair face of brickwork or concrete surfaces in cement mortar 1:6 complete all as specified

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

Dismantling of floor hearth and wall tiling incl cement morter bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M & L 20mm thick Granite (of any type)tiles machine cut, in skirting/dado laid over cement screedand jointed with grey cementslurry, and pointed with whitecement with admixture ofpigment to match the shade ofgranite stone including grindingand polishing complete including 10 mm thick plaster in CM 1: 4

Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level.

M & L 75mm th PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L plain cement concrete type B1 1:2:4 (20 mm crushed stone aggregate) as in,copings, kneelers, apex stones,bed plates, kerbs, watertroughs and the like includingweathering, slightly roundedor chamfered angles andthroating, as directed

M&L chequred cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, over15mm thick cement screed beeding layer in cement mortar 1:4 complete all as specified and directed.

S& F sand filling under floor or in floor or paving, laid in including watering and consolidation true surface for laying paver block complete all as specified and directed

M &L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, Grade M-35 with grey cement and pigment complete all as specified and directed.

Providing precast cement concrete type B-0 1:2:4 (using 12.50mm graded stone aggregate) louvers and jallies, 25mm thick (measured solid) including moulding but excluding frame set in CM 1:4.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; gates,ladders; framed balusters; walkways; railings; framework of water tanks includingframed and hung asgates, including pintle hinges, stops,hand-made sliding bolts, etc and similar workcon- forming to Fe.290.Gde-E-165

Dismantling fencing wire mesh,any type including post and demolition PCC in embeded portion and making post hole good complete all as specified

S&F MS steel for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (20mm aggregate) as in bed blocks incl necessary form work complete all as specified and directed.

Supply only chain link MS galvanised fencing,wire and size of mesh 50mm x50mm x 3.15mm including line wires to any type of standered rails, straining bolts, nut & bolt for angle iron post MS tie bars incl provisioning of binding wire etc completeof any size or type complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

Mild steel screw bolts(machine made) withhexagonal or squareheads at one end anscrewed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm lon

S&F wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessay drilling bolting or riveting etc, and similar work confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L mild steel round bar 10mm dia and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting, painting etc Fe-410-W (Gde E-250) quality -A or Fe 290 (Gde-E-165) complete all as specicifed and directed.

DEEPAK JAISWAL

Dev Enterprises

GHASI RAM SAHU