COMPREHENSIVE MAINT AND PERIODICAL SERVICES IN OTM AND MD ACCN IN AREA A-3 OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT

Amount

Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level.

M& L Cement concrete type C-2, 1:3:6 using 40mm graded aggregate in foundations filling and mass concrete and complete all as specified

M&L Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges or benching as specified and as directed

Material and labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified

Material and labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified

M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in path and in plinth protection finished fair and even.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match,and including 15mm thick screed bed in cm 1:6.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match ,and including 15mm thick screed bed in cm 1:6.

Ditto as above item but in vertical surface including 10mm thick backing coat of Cm 1:4.

M&L for ceramic coloured tiles of size 300x200mmx6-7mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured cement to match including 10mm thick backing coat plaster in CM 1:4

M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6,complete all as specified

Material and labour for vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm (square / rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm (square / rectangular) as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation

M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade

Fixing only 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.

S&F in repairs vitreous China orissa pattern water closet size 580mmx440mm white with integral foot rest.

S&F in repair vitreous china white wash hand basin flat back size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but excluding waste pipe

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F in repairs 10 ltrs PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed by Engr in Charge.

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store.

All as per item No 21 herein before but 20mm dia

S&F steel tubes medium grade galvanised with all fittings and fixed complete to wallsand ceiling or laid in floor bore of pipe 15mm dia & making good the same with Cement Concrete 1:2:4.

All as per item No 23 herein before but 20mm dia.

S&F in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipes or for Unions and fixed.

S&F in repair 20mm bore of pipe ball valves high pressure of PTMT with eppoxy coated aluminium rod & high density polythene ball screwed for iron pipe and fixed. (Min weight for 20mm - 210 gms)

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete

S&F in repair pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.

S&F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap.

S&F in repairs tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, capacity 500ltr

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, capacity 1000ltr

Dismantling of cast iron drain 75/100 mm dia from floor/walls etc and taking out of trenches/floors.

M&L for cast iron soil waste and vent pipe sand cast any length with or without ears with cement joints fixed to walls 75mm dia

All as per item above but bore of pipe 100mm dia.

M&L cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Diameter of outlet in 75mm.

Taking down shutters of any description n exceeding 1 Sqm each

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each.

S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 2nd class factory made hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (b)

M&L 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame works

S&FSolid PVC Door Frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M. S Square tube, suppling& fixing in opening as per specification & drawing.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per direc

S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples.

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.includingHacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty.

S & F aluminium tower bolt anodised of extruded section 200mm

S &F in repair aluminium anodised 300 mm sliding door with hasp staple (bolt type) and fixing clipsof sheet cast or extruded section and fixing bolts and sliding both of extruded sections.

S & F aluminium anodised type anodised handles 150 mm

S&F Butt hinges, medium weight cold rolled mild steel 100mm size.

S&F Butt hinges, medium weight cold rolled mild steel 75 mm size.

S&F for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

M& L in repair Mild Steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixing by screw ,welding, etc as per requirement and complete all as spd and as directed .

S & F mild steel powder coated pelmet rods including 02 Nos of brackets complete all as specified and as directed by theEngr in charge

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed

M&L for brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6 m mean radius , built in cement mortar 1:6

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and as directed.

M&L for rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.

M&L for prepration of new plaster surfaces of walls & applying two coats of exterior emulsion paint over of a coat of wall primer and complete all as manufacurers instructions and directed by Engr -in-charge..

M & L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

S&F aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and as directed by the Engineer-in-Charge.

M&L for anoised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-Charge.

M&L for anoised aluminium window and ventilattor shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-Charge.

S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty

S&F for sheet glass 5.50 mm thick ordinary quality and glazing with ail putty in squares exc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge

Supplying and Fixing plain colour PVC sheet 6mm thick fixed in Aluminium frame work by using suitable adhesive/fixing clips all as specified and directed by Engr-in-Charge.

Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification given on page 162 of SSR-2010 Part-II for solid PVC wall lining including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing.and including dismantling of doarding of any discription complete all as specified and directed.

Supply and fixing 4mm thick size 600x600mm HPSC (High pressure steam cured) pre-primered self embossed, textured designerd board E- board classic to be fixed on including GI powder coated grid /section size 600x600mm with main runner 38x24x0.9mm thick, cross tee 28.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm c/c both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including provision for light fixtures of any size and including taking down old ceiling complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base of cement mortar 1:4, 15 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M&L Machine cut kota stone slab in skirting, dado 20-25mm thick over cement screed base of cement mortar 1:4, 10 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

M&L for prepration of old surfaces of walls and applying two coat of colour wash on wall complete all as specified and directed by Engr -in-charge.

M&L for prepration of old surfaces of walls and applying two coat of white wash on ceiling complete all as specified and directed by Engr -in-charge.

M&L for Complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applied two coats of cement base paint over a coat of primer and complete all as specified and directed by Engr-in-charge.

M&L for Complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applied two coat of Oil Bound Distemper over a coat of primer and complete all as specified and directed

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.

M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.

M&L for complete removal of existing treatments by washing, rubbing down up to reach of plaster surface and stopping etc & finished wall with premium acrylic smooth exterior paints with silicone additives of required shade .New work (Two or more coat applied @1.43 ltr /10 Sqm over and including priming coats of exterior applied @ 2.20 kg /10 Sqm).

Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.

Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.

Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sannding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

Providing and applying two coats of cement based paint @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min. 1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

S&F for framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering for door or guard bar to be prepaired for hanging or sliding with and including either hooks and hinges or steel hanging sheeting or other covering running rails and guides) and hanging also for Fe 410-W (Gde-E-250) quality A complete all as spd.

Dismantiling of unframed work timber scantiling 40 sqcm and over in section in any position complete all as sped

Dismantiling of plain or corrougated steel sheeting any gauge thickness including nainital or similar pattern roof covering.

S&F Steel work as in tubular section for Post, Purline etc including special shaped washer , angle cleat, holdfast, gussete plate etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (incl rivet or nut and bolts) providing and fitting angle cleats Gussete plates etc also for welding plumbing, truing up and fixing complete as directed by Engr-in-Charge.

M&L pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws/ J or L type hook bolts complete as directed by Engr-in-charge.

Taking down existing water proofing from roof slab and cleaning the roof slab incl scrapping of existing lose concrete from roof top and washing with water.

Supply only integral water proofing compound.

M&L 40mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg in padding Complete all as specified and directed.

M&L 12mm thick rendering on top of roof salb in cement mortar 1:4 by using water proofing compound @3% by the weight of cement, finishing the surface even and fair without using extra cement.

M&L for priming surfaces with bituminous primer polymerised primer oil based.

M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per sq mtr including cleaning surfaces.

M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application( sealed by flame) with over lap of 10 cm finally it will be finished with a coat of aluminium paint @0.200 Kg/Sqm as per manufactures instruction complete all as specified and directed complete all as spd and directed.

G S TRADERS

M/S Vinod Kumar

AAY KAY ENGINEERS

KAMALJIT SINGH CONTRACTOR

HYLAND CONSTRUCTION COMPANY

SARASWATI CONSTRUCTION CO

BHARAT ENTERPRISES