PROVISION OF PARKING SHED FOR FIRE TENDERS AND ASSOCIATED AMMENITIES AT AF STATION BAMRAULI.

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in over area not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Excavating in trenches, not exceeding 1.5 metre wide for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in soft/loose soil complete all as specified and directed.

Excavating in post holes each not exceeding 0.5 Cum in soft/loose soil , getting out, and removing surplus soil to a distance not exceeding 50 metre and making good surface. Note :- PCC for filling shall be measured and paid for separately under respective item of this schedule.

Removing excavated surplus soil to a distance exceeding 250 metre and not exceeding 500 metre depositing where directed at level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Material and labour hard core of gauge not exceeding 63mm, deposited, spread and levelling in layers not exceeding 15 cm thick, watered and rammed to true surface complete all as specified and directed.

Providing plain cement concrete 1 :4 : 8, type D-2, using 40 mm graded crushed stone aggregate as in foundations, filling, mass concrete, post holes, bed of pipe etc complete all as specified and directed.

Providing plain cement concrete 1 : 2 : 4, type B-1, (using 20 mm graded crushed stone aggregate) as in foundations, filling, and mass concrete etc complete all as specified and directed.

Providing Plain, cement concrete 1:2:4, type B1 (using 20mm graded crushed store aggregate) in copings, and the like including weathering, slightly rounded or chamered angles and throating, including necessary form work complete all as specified and directed.

Material and labour brick work using sub class 'B' bricks (old size bricks) built in cement and sand mortar (1:6) straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

Supply only Aluminium, anodised, barrel tower bolts of extruded section size 150 mm long complete.

Supply only Aluminium, anodised, handle cast type size 150 mm long complete.

Supply only 125mm long extruded aluminimum section hinges with galvanisedmild steel hinge pin type B-21 complete.

Supply only 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix mild steel tubular section as in post / column / strut etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240.

Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde E-250 quality-B) etc complete all as specified and directed.

S&F Aluminium (powder coated) window and ventilator shutters with fram, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws, fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number) (Notes : (i) Glass panels to windows/ventilator shall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyster) coating shall not be less than 50 micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware.

Supply and fix Factory made prelam PVC door frame " of size 100x45mm ((minimum) with a wall minimum thickness of 5 mm made out of extruded PVC sheet of density 600 kg/cum manufactured by an ISO-9000 certfied company and by joining 3 number heat bent PVC sheet section, the inside section of minimum size 90x30mm shall be made from prelam coloured PVC sheet of 5mm (minimum) thickness, the inside section will be covered by sticking two long brackets of 15 mm x15mm mild steel square tube, the two vehicle door frame made of 5mm thick plain colour PVC sheet reinforced with mild steel square tube the vertical door frame are to be reinforced with (minimum) 40mmx20mm mild steel tube of 19 gauge (minimum) through out the frame. the door frame shall be fixed to wall using 8/100mm long mild steel screws through the frame by using and or fasterners. A minimum of 04 number of screw to be provided for each vertical member and two number for horizontal members etc. complete as per manufacturers specifications and as shown on drawing No.CWE/BAM/TD-40 Sheet No.1/3 & 2/3. Note :- Gap in between frame & wall/lintel shall be filled properly with suitable materials as per manufacturer's instruction to avoid crackes after wards. (ii) Colour & design shall be as approved by GE.

Pre painted galvalume aluminium zinc coating GI base plain steel sheet 0.50mm thick (TCT) of an colour having minimum tensile strength of 550 Mpa as ridge in roof fixed with self tapping screws as specified in particular specifications. Note :- (i) Outer colour of sheet shall be as approved by GE based on availability from manufacturer. (ii) Work shall be executed by the manufacturer's authorised Vendor only.

Supply, fixing in position premium sand texured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling, 600x600 module consisting of wall angle section 24x24 mm and tee section with web height of 38mm and flange 24mm (colour white) (having rotary stiching on all T-section) with suspension system as shown in drawing No CWE/BAM/TD-34 She 1/1 and as approved by the GE including taking down old false ceiling complete all as specified and directed. Note :- (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled / Tegular)" or equivalent brand of make as specified in Appendix 'B' to particular specifications. (ii) Thickness of GI section shall not be less than 3mm and shall be procured from the tile manufacturer. (iii) Section and hanging system shall have galvanizing of minimum 90 grams per square metre and of same make of tile. (iv) Work shall be executed by the manufacturer's authorised Vendor. (v) Old false ceiling shall be contractor property and necessary recovery shall be made as per rate specified in schedule of credit.

Material and labour 40mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate, laid in bays, over a coat of cement slurry as specified in MES SSR Part I complete all as specified and directed. Note :- (i) Glass dividing strip shall be measured and paid for separetely under respective item of this schedule.. (ii) Quoted rate shall deem to be included cost of cement slurry as specified in Para 13.32.7 of MES SSR Part I.

Supply only 3mm thick 38mm width glass dividing strips, complete all as specified and directed.

Material and labour 75 mm thick plain cement concrete 1 : 4 : 8 type D-2 (40mm graded aggregate) as in sub base of flooring complete all as specified and directed.

Material and labour 75 mm thick plain cement concrete (1:3:6) type C-2 , using 40 mm graded crushed stone aggregate as in plinth protection laid in alternate panel not exceeding 3 metre surface shall be finished even and fair complete all as specified and directed.

Material and labour 450mmX350mm X 7-8 mm thick glazed ceramic coloured tiles in vertical surfaces such as skirting, dado, etc set & jointed in neat cement slurry and pointed in white or colured cement to match over & including 10 mm thick backing coat in cement and sand mortar (1:4) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of backing coat.

Material and labour 300mmx300mm x 7-8 mm thick non skid coloured ceramic tiles in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement and sand mortar (1:4) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.

Material and labour chequered tiles 30cm x 30cm x 25mm thick fixed over 15 mm thick screed bed or bedding layers of mortar in CM 1:4 with white cement and pigment with water absorption less thain 0.5% and confirming to IS 4457:2007 complete all as specified. Note :- Design and colour of tile shall be as approved by GE.

Material and labour 15mm thick rendering in cement and sand mortar (1:4) on fair faces of brick work / concrete surfaces finished even and fair complete all as specified and directed.

Material and labour 15mm thick rendering in cement and sand mortar (1:4) on other than fair faces of brick work / concrete surfaces finished even and fair complete all as specified and directed.

Material and labour preparing new plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

Material and labour preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour 15mm dia Tubes, ‘medium grade’ galvanised, with all fitting concealed or fixed on walls and ceilings or laid in floors etc and testing complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of cutting chasses in wall for concealed pipe.

Material and labour 20mm dia Tubes, ‘medium grade’ galvanised, with all fitting concealed or fixed on walls and ceilings etc and testing complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of cutting chasses in wall for concealed pipe.

Hoisting and fixing Rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered, 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection including ball brass valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed 20mm dia polythene floated fly nut, tank nipple, 2 Nos 20mm dia union, wash out pipe etc complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floors or in wall complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floors or in wall complete all as specified and directed.

Supply and fix PVC (SWR) bends 110 mm dia, of any radius complete all as specified and directed.

Supply and fix PVC (SWR) bends 75 mm dia, of any radius complete all as specified and directed.

Supply and fix bib tap long body with wall flange, fancy type, chromium plated, brass, screwd for 15mm bore iron pipe with capstain head complete all as specified and directed. Note :- Bib tap cat part No F200011 of Hindware or equivalent model of make as specified in Appendix 'B' to Particular specifications.

Supply and fix pillar tap fancy type, chromium plated, brass, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shankes and fly nut screwed for 15mm bore iron pipe with capstain head complete all as specified and directed.

Supply and fix vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. complete all as specified and directed.

Supply and fix One piece European water closet vitreous china snow white with 'S' trap (300mm wall distance) of size 645 x 350 x 730 mm soft close seat cover, twin flushing, fittings complete including toilet paper roll holder with flap, hand shower (health faucet) ABS body with wall hook and 1 metre SS braided ruber hose pipe, angular stop valve (cock), 600mm long PVC braided connection complete. Note :- (i) Water closet cat part No S1013132, toilet paper roll holder cat part No F5002110, health faucet cat part No F8030102, angular stop cock cat part No F 8040204 of CERA model or equivalent model of make as specified in Appendix 'B' to Particular specifications

Supply and fix vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

Supply and fix 125 mm dia minimum 3 mm thick chromimum plated stainless steel grating doom for trap cover complete all as specified and directed.

Supply and fix 600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screws complete all as specified in particular specifications. Note :- (i) Towel rack cat part No F5002101 of Cera or equivalent model of make as specified in Appendix 'B' to Particular specifications

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed.

Material and labour point wiring complete with 1.5 Sq mm, single core PVC insulated PVC unsheathed multi-stranded copper conductor FRLS cable 1100 volts grade laid/drawn through and including rigid PVC conduit pipe (minimum 20 mm external dia) with necessary conduit fittings / accessories fixed concealed in walls/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, modular fittings like switches, sockets, fan regulator etc with base cover plate, grid plate etc concealed in walls etc including 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connecting to earth dolly of one light / fan / bell point controlled by one way switch complete all as specified and directed.

Material and labour point wiring complete with 1.5 Sq mm, single core PVC insulated PVC unsheathed multi-stranded copper conductor FRLS cable 1100 volts grade laid/drawn through and including rigid PVC conduit pipe (minimum 20 mm external dia) with necessary conduit fittings / accessories fixed concealed in walls/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, modular fittings like switches, sockets, fan regulator etc with base cover plate, grid plate etc concealed in walls etc including 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connecting to earth dolly of one 3 pin 5 amp switch socket independent board complete all as specified and directed.

Material and labour point wiring complete with 1.5 Sq mm, single core PVC insulated PVC unsheathed multi-stranded copper conductor FRLS cable 1100 volts grade laid/drawn through and including rigid PVC conduit pipe (minimum 20 mm external dia) with necessary conduit fittings / accessories fixed concealed in walls/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, modular fittings like switches, sockets, fan regulator etc with base cover plate, grid plate etc concealed in walls etc including 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connecting to earth dolly of one 3 pin 5 amp switch socket independent board but below the switch board of light point in the same vertical plane complete all as specified and directed.

Material and labour point wiring complete with 1.5 Sq mm, single core PVC insulated PVC unsheathed multi-stranded copper conductor FRLS cable 1100 volts grade laid/drawn through and including rigid PVC conduit pipe (minimum 20 mm external dia) with necessary conduit fittings / accessories fixed concealed in walls/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, modular fittings like switches, sockets, fan regulator etc with base cover plate, grid plate etc concealed in walls etc including 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connecting to earth dolly of one 3 pin 5 amp switch socket of same board complete all as specified and directed.

Material and labour point wiring complete with 4 Sq mm, single core PVC insulated PVC unsheathed multi-stranded copper conductor FRLS cable 1100 volts grade laid/drawn through and including rigid PVC conduit pipe (minimum 20 mm external dia) with necessary conduit fittings / accessories fixed concealed in walls/ceiling by means of PVC sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, modular fittings like switches, sockets, fan regulator etc with base cover plate, grid plate etc concealed in walls etc including 4 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as continuous earth wire to common earth and connecting to earth dolly of 16 amp switch socket outlet on independent board complete all as specified and directed.

Supplying, laying, testing and commissioning of twin core service cable flat m,ultistandard aluminimum conductor of cross sectional area 16 sqmm 2 core suspended with glavanised iron wire 4 mm dia duly fixed with rubber real of suitable interval, of 1100 volt complete all as specified and directed.

Sypply and fix factory made sheet metal enclosures distribution boards, (protection class IP-42) double door, suitable for mounting MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, single pole and neutral, 8 ways, 240 volts Note :- MCBs shall be measured and paid for separately under respective item of this schedule.

MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before..

MCB, Single pole and neutral, 230 volt, 32 to 40 Amp rating 10KA, C series fixed in DBs catered herein before.

Supply and fix Switch modular flush 6 A single pole one way (one module)

Supply and fix Ceiling rose, surface bakelite, 60 x 25, mm three terminals.

Supply and fix Modular socket 16 Amp, 2 in 1 and 3 / 5 pin combined (two module).

Supply and fix Modular socket 6 A, 2 in 1 2/3 Pin combined ( two module).

Supply and fix Switch modular flush, 15/16 A, single pole, one way.

Steeped type electronic fan regulator modular type and connecting up. Regulator shall be of make as specified in appendix 'B' to particular specifications.

Supply, fixing in replacement and connecting wall mounted LED light fitting 21 Watt LED (6000K/6500K) (1200/1144mm) extruded aluminium heat sink provided for efficeint heat dissipation intergrated electronic driver including necessary electric connection including taking down old fittings complete all as specified and directed.. Note :- Fitting shall be of Make Philips cat part No BN021C LED20S PSU CW GR S2, Havells cat part No LUMILINEPLUSBS22WLED865SPCSS or equivalent model of make specified in Appendix 'B' to particular specifications.

Supply and fix ceiling fans 1200 mm sweep white in colour of Aluminium blades(three numbers) and body,double ball bearing, down rod, .fan motor of copper, pair of canopy, shackle, assembly kit etc suitable for SP 230 to 250 volts, 50 Hz, AC supply complete. Make :- Havells CAT No ES-50 5 star (energy saving fan) or equivalent model of make specified in appendix 'B' to particular specifications.

Supply and fix LED Flood light 60 watts IP 66 protection including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size and length. Make : Philips Cat part No BVP182 LED70 CW, Havells Cat part No JETAQUANTOPLUSFLP60WLED757SYMLENS and CG Cat part No PROFILE+ NEO LFL-60-CDL/60-M or equivalent model of make specified in appendix 'B' to particular specifications.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete including roof padding, including cleaning the surfaces with wire brushes etc complete all as specified and directed.

VINAYAKA (INDIA) MULTIFARIOUS SERVICES PVT LTD