REPLACEMENT OF FTL/ CFL FITTINGS AND BULBS WITH LED FITTINGS ON OD DOMESTIC AND TECH AREA, EME LINES, MH AVADI AND PTMS AREA AND REPAIRS TO VARIOUS E/M INSTALLATION OF ARMY AREA UNDER GE AVADI

Amount

Supply & fix Recess mounting LED backlit panel ceiling light 2X2 environmental friendly new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source not less than 120 lumen/watt for LED backlit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 30 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :- Havells :- VENUSNEOHE2X2PLR18-42WLED830MOD / Bajaj :- BZRSQL 30W GXD WH SD /Crompton:- LCTLRNE-30-FO-CDL

Supply & fix Modern art design Recess mounting LED panel ceiling light 2X2 environmental friendly new generation rhobus shaped slim geometric and aligned ultra modern delight nuique designs recess mounting luminaire with high brightness SMD LEDs as light source not less than 120 lumen/watt for LED luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 36 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :- Crompton:- LCTRLF6-36-CDL /Havells :- PETAL 2X2PLR36WLED840S/ Bajaj :- BCRSP 28W LED NW (PETAL)

Supply & fix Surface mounting LED panel ceiling light 2X2 environmental friendly new generation aesthetically designed ultra modern surface mounting luminaire with high brightness SMD LEDs as light source, LED luminaire not less than 100lm/w with podwer coated white CRCA full glow LED Panel complete for ceiling applications 30 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :- C&S :- CYGNUS-CS/30W/2X2/W / Syska :- SSK-SDS-30W-N /Havells :- PLUTOSURFA CE2X2PLS34WLED840S

Supply & fix Surface mounting LED panel ceiling light 1X1 environmental friendly new generation aesthetically designed ultra modern surface mounting luminaire with high brightness SMD LEDs as light source, LED luminaire not less than 100lm/w with podwer coated white CRCA full glow backlit LED Panel complete for ceiling applications 15/18 Watt LED (1'X1') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :- Bajaj :-BZSSQL 18W LED WHi/ Crompton :- LCDSPLN-S-18 CDL /Havells :- PLUTOSURFACE1X1PLS15WLED840S

Supply & fix Recess mounting LED backlit panel ceiling light 1x1 environmental friendly new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire suitable for armstrong/grid ceiling complete for ceiling applications 15/18 Watt LED (1'X1') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :-Havells :- PLUTO 1X1 PLR15WLED840S / Bajaj:- BZRSQL 18L WH OD SD /Crompton :- LCTLRNE-18-CDL(1X1)

Supply & fix Recess mounting LED backlit panel ceiling light 4x1 environmental friendly new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire suitable for armstrong/grid ceiling complete for ceiling applications 36 Watt LED (4'X1') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :-Havells :- VENUSNEOHE4X1PLR36WLED830S / Philips:- RC380B LED30S-6500 G5 L3W12 PSU OD /Crompton :- LCTLRNE-40-CDL(1X4)

Supply & fix Surface mounting LED panel ceiling light 4x1 environmental friendly new generation aesthetically designed ultra modern surface mounting luminaire with high brightness SMD LEDs as light source, LED luminaire suitable for ceiling applications 36 Watt LED (4'X1') complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :-Havells :- PLUTONEO4X1PLR36WLED840S/Bajaj :- BZSSLL 36W LED WH / C&S :- LTCSP36WLED1X4

Supply & fix Recess mounting LED ceiling light environmental friendly new generation aesthetically designed ultra slim recess mounting luminaire with high brightness SMD LEDs as light source, LED backlit luminaire suitable for armstrong/grid ceiling complete for ceiling applications 15Watt LED complete with electronic driver, suitable for operation on AC, single phase , 220/230V , 50 Hz , including provision of twin core 1.0 Sq.mm copper conductor PVC insulated , 1100 Volts grade cables not more than 5 m long and connecting up ceiling rose and fittings and testing , including taking down old fittings all as specified and as directed. Make :- Bajaj :- BGSLO SLEEK 15W WH RD /Crompton :- LSCRM-15W-CDL Havells :- EDGEPRORDDLR15WLED840S

Supply and fix Surface and wall mounted LED double tube fixture, 2 x 22 Watts, universal batten for T5 and T8 lamps, including all accessories including Ultra bright glass LED Tubelight 20W, with very high efficancy suited for installation in T8/T5 fitting with G13 lamp holders complete all as specified and suitable to operate on AC 230 V, 50 Hz supply, pre wired including connecting up with PVC sheathed 1.0 sqmm 3 core copper conductor flexible wire complete all as specified and as directed. Make : Havells:- Cat No:- REGALBATTENT8UPTO2X22WSSBSWH/CRYSTAL 1213T8DSTL18WLED865SGLASS / Bajaj,Cat No:-BLRB-DB 218/BLRB 18W CW LED / Crompton : Cat no :- IGP162LT8-16/LT8-20-865-(2)

Supply and fix Surface and wall mounted LED tube light fitting 20W, decorative ultra slim polycarbonate housing LED lightning fixture with high lumen output,environmental friendly energy efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply including taking down old fittings complete all as specified. Make :- Havells :- LHEXACP7IN1W020 / Crompton :- CCS-102-20-65-SL-DP-NWH /Bajaj:- BCLSB 20 WH

Supply and fix Surface and wall mounted LED tube light fitting 10W, 6500K decorative ultra slim polycarbonate housing LED lightning fixture with high lumen output,environmental friendly energy efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply including taking down old fittings complete all as specified. Make :- Havells :- LHEXACP7IN1W010 / Crompton :- LCTLN-10-CDL/ Bajaj :- BCLSB 10 WH

Supply and fix Emergency energy saving LED Bulb 9 watt with back up up to 3 to 4 hrs, B-22 base suitable for operation on AC, single phase including taking down old bulb complete all as specified and directed. Make:- Syska/Wipro/Surya

Supply and fix LED Bulb 12 watt, B-22 base suitable for operation on AC, single phase including taking down old bulb complete all as specified and directed. Make:- C&S/Wipro/Surya

Supply and fix Decorative ECO bulkhead luminaire capacity 10/12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ includint taking down fitting complete all as specified. Make :- Luker :- Eco Bulkhead (LBKOVSL12) /Crompton :- LBHP-10-CDL / Surya :-SLE BH 10W

Supply and fix LED building security street light 25W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket all as per dirtected including taking down old light complete all as specified. Make :-C&S ( INDUS-i/25W) / Bajaj :- BCLST 25W LED I V2 /Crompton :- LSTS-25-CDL-M

Supply and fix Flood light luminaries LED energy saving 50 Watt, LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light with high pressure die cast aluminium housing and impact resistant polycarbonate lens complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with 1.5 Sqmm 2 single core PVC insulated and unsheathed, multi stranded FRLS copper conductor cable drawn in flexible conduit including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :-Jaguar ( LFLD04S050XC) / Havells :- JETA QUANTOPLUSFLP50WLED757SYMLENS /Crompton :-CFS-50-57-60D-SL-GL-NSG

Supply and fix Flood light luminaries LED energy saving 100 Watt, LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light with high pressure die cast aluminium housing and impact resistant polycarbonate lens complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with 1.5 Sqmm 2 single core PVC insulated and unsheathed, multi stranded FRLS copper conductor cable drawn in flexible conduit including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :-Jaguar ( LFLDSLM100XC) / Havells :-JETAIRISFLS100WLED757SYMLTG / Bajaj :- BJFL 100W LED

S&F LED energy saving industrial type tube light fitting for capacity 40watt,6000k,IP65 with high efficancy integrated electronic driver ,dust and water proof corrosion and impact resistant batten with polycarbonate housing complete including connection from ceiling rose to light fitting with suitable size of connection cable including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :-Jaguar ( LPRDO1X040C) / Havells :- MAGNUMGRANDNEOIP6640WLED865SPC /Crompton :- CIS-300-40-57-SL-DP-NGR

Supply and fix LED energy saving High bay light fitting for capacity 120watt,5700k ,integral industrial SMD LED with pressure die -cast aluminium housing ,lumen capacity >130 Lm/watt,thermal management with compact heat sink(IP-60 rating) complete with all connected and fitting accessories including connection from ceiling rose to light fitting with suitable size of FRLSH copper connection cable including taking down old fittings complete all as specified. Make :-Jaguar ( LPRDO1X040C) / Crompton:- CIP-320-120-57-60D-HL4-GL-NSR / Bajaj :- BGHBC 120W LED XL MB

S&F LED energy saving industrial lightining well glass light fitting for capacity 40 watt,IP65 with die cast aluminium housing and polycarbonate diffuser and high efficancy integrated electronic driver complete including connection to light fitting with suitable size of connection cable complete controlled by MCB complete all as directed. Make : Jaguar (LWGL01X040XC) / Havells :- ENDURAWELLGLASSNEOTSS40WLED757SPCSO / Crompton :- CIP-311-40-57-SL-CP-NSG

M&L Double stiff pendants, comprising of galvanised steel or chromium plated brass bell mouth connectors 2 Nos with back plate and 2×1.50 metre long parallel 20mm dia galvanised or stove enamelled screwed steel conduit with two check nuts for fixing tube light fitting and upto 1.5 metre long twin core 0.5 sq. mm copper conductor flexible wire/cable complete all as specified and as directed.

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia fixed on wall with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet, 60mm deep, concealed in walls, duly painted with two coats of anti-corrosive over a coat of red oxide zinc chrome primer and covered with bakelite hylam sheet cover 3mm thick fixed with cadmium plated screws for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for

(a) One light point controlled by one switch.

(b) One Ceiling fan point controlled by one switch.

(c) One exhaust fan point controlled by one switch.

(d) One 3 pin 5 amps socket point on independent board

(e) One 3 pin 5 amps socket point on same board

M & L for point wiring with 4 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20mm dia and its accessories fixing on wall/ ceiling/ trusses with suitable clamps , screws etc including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for One 5 pin 5/15 amps socket point on independent board complete all as specified

S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified.

S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified.

S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.

S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.

S&F electronic fan regulator, flush type phenolic laminated sheet etc complete all as specified.

S &F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

M&L Pointing wiring in Existing conduit with 1.5 Sqmm (nominal area) PVC insulated,(FRLS) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing conceled PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover for one light/fan/5 Amp socket all as specified and directed.

M&L Pointing wiring in Existing conduit with 4 Sqmm (nominal area) PVC insulated,(FRLS) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing conceled PVC/ steel heavy duty conduit 20 mm dia (concealed) conduit including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover for 15 Amp socket all as specified and directed.

S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40-63 AMP, in the MCB DB. Complete with connection testing and commissioning complete all as specified.

Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.

Supply and fix aviation obstruction light Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply and including taking down old fittings complete all as specified. Make :- Bajaj :- BGAV 302 LED and equivelent Havells/C&S

Material and labour, Air termination, single pointed aluminium rod 12mm dia and 300mm long, including making connection to earthing conductor, fixed as in replacement of old termination rod, complete all as specified and directed.

Supply and fix, GI pipe 25mm bore light grade (ISI marked), cut piece of 1.0 metre - 1.5 metre length or as directed by Engineer-in-Charge, fixed vertically with bottom end embeded in & including cast-insitu PCC (1:2:4) block of size 20cmx20cmx15cm including use and waste necessary fair finish form work, and other end (at top) fixed to air termination rod with necessary bolts, nuts etc as required, complete all as specified and directed.

Material and labour, test point terminal block made of gun metal or phosphorus bronze or copper, size 75mmx75mmx25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screws, complete all as specified and directed.

Material and labour, Earth continuity conductor or main earthing lead or lightning conductor, 25mmx3.15mm aluminium strip, fixed to wall on batten with saddles and fixing screws or PVC/ Porcelain insulators etc. or recessed or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing or roof conductors and down conductors etc. as required, including brazing on both sides (over lapping) at all joints except test point, fixed as in replacement of existing strip, complete all as specified and directed.

Material and labour, earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground vertically with top edge of earth plate not less than 1.5m below normal ground level (depth of pit not less than 2.25m below normal ground level), earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using galvanized iron strip of size 32mmx6mm thick by means of welding on both sides as directed by Engineer-in-Charge and other end of earth lead connected to main switch board or main control board or test point or equipment, earth lead protected by galvanized iron pipe light grade (ISI marked) 40mm bore, alongwith watering pipe 20mm bore GI medium grade (ISI marked of specified make), funnel with wire mesh including all necessary excavation & earth work, PCC chamber in PCC (1:2:4) type B-1 & RCC cover (in lieu of CI cover), all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion, including takingdown old unserviceable earth pit complete all as specified and directed.

Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed by Engr-in-Charge

Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing and taking down old unserviceable earth pit complete all as specified and as directed.

Earthing complete with galvanised steel earth plate eletrode 60xm x 60cm x6 mm thick buried directly in ground (earth plate not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level, connecting to the Galvanised iron earth strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x6mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering of suitable length placed on top edge of earth plate, charcoal and common salt filling, with fixing arrangement, funnel, wire mesh and earth work in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 meterrs, complete all as per plate No-3, SSR-2009 Part-I and connecting to existing earth test point all as specified or indicated including testing on completion.

Material and Labour for MCCB 160 amp ,4 pole 415 volts ,3 phase ,50 Hz AC with adjustable thermal setting & 36 KA breaking capacity with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993(Latest Version). The MCCB should have Ics= 75% Icu for short circuit breaking capacity of minimum 36 KA rms at 415 volts 50 Hz AC. The MCCBs shall have spreader links and barriers as standard feature of manufacturer including taking down old unserviceable one complete all as specified and as directed.

Material and Labour for MCCB 200 amp ,4 pole 415 volts ,3 phase ,50 Hz AC with adjustable thermal setting & 36 KA breaking capacity with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993(Latest Version). The MCCB should have Ics= 75% Icu for short circuit breaking capacity of minimum 36 KA rms at 415 volts 50 Hz AC. The MCCBs shall have spreader links and barriers as standard feature of manufacturer including taking down old unserviceable one complete all as specified and as directed.

Material and Labour for MCCB 250 amp ,4 pole 415 volts ,3 phase ,50 Hz AC with adjustable thermal setting & 36 KA breaking capacity with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993(Latest Version). The MCCB should have Ics= 75% Icu for short circuit breaking capacity of minimum 36 KA rms at 415 volts 50 Hz AC. The MCCBs shall have spreader links and barriers as standard feature of manufacturer including taking down old unserviceable one complete all as specified and as directed.

Material and Labour for MCCB 400 amp ,4 pole 415 volts ,3 phase ,50 Hz AC with adjustable thermal setting & 36 KA breaking capacity with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993(Latest Version). The MCCB should have Ics= 75% Icu for short circuit breaking capacity of minimum 36 KA rms at 415 volts 50 Hz AC. The MCCBs shall have spreader links and barriers as standard feature of manufacturer including taking down old unserviceable one complete all as specified and as directed.

Supply and Fixing of LED post top lantern,230 V,AC, 20 W, LED, outdoor type,360 degree indirect light,CCT not less 6000K high pressure die cast aluminium housing ,heat resistance toughened glass with frame IP 65 protection LED lumen efficacy not less then 120 lumen/watt, reflector lenses for uniform light distribution on each LED with driver,lamp, bracket with impact and corrosion resistant including thermal management in multiple optics complete fixed on existing / New bracket and making connections including taking down the old one complete all as specified and as directed .

Material and labour for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade of size 2 core 16 Sqmm cross-sectionl area in replacement, fixed on wall including taking down of old unserviceable cable complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings all as specified.

Dismantling timber scantling 40sqcm and over in section framed work, in any position,complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates Fe-410-W (Gde-E-250) quality-B complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws as specified

Dismantling of ceiling board of any thickness. Including frame work all as specified.

S & F of aluminium snap grid false ceiling of panels of size 605 x 605mm using aluminium anodised wall angle of size 25 x 25 x 1.50mm thick fixed to walls with rawl plug and screws n. exc 1.50m c/c and intermediate panels using main "Tee" and cross "Tee" aluminium anodised section of size 35 x 25 x 1.50mm and 25 x 25 x 1.50mm thick suspended with and including 4mm dia GI wire n. exc 1.2m c / c and12mm thick Gypsum Board in ceiling with 1mm plain PVC Sheet fixed to aluminium frame work with screws complete all as directed.

Taking down chowkats or frame exc. 1.50 sqm but nexc 4.00 sqm each with shutter (without taking of shutter from the frame) complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkhats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick(styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.

S&F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified.

S&F 125mm long Aluminium handles, cast type, anodised, all as specified and directed.

M&L for 125mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed .

S & F small articles of steel such as hold fast, etc of Gde Fe 410-0 or Fe-290 Gde E-165 complete all as specified and directed.

S&F for 35mm thick second class hard wood plain framed panelled shutters (any numbers of panels) with panels of timber flat on bolts side (feather edged or veneered particles board medium density wood particles with commercial face veneers etc, complete all as specified and directed.

S & F 35 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed.

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified & directed.

S&F floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified & directed.

Supply and fix in repairs to stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Taking up or down steel tubing 15mm and connections fixed in wall / ceiling / floor all as specified.

Taking up or down steel tubing 20mm and connections fixed in wall / ceiling / floor all as specified.

S & F 15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe all as directed.

Ditto all as per item No. 73 above but 20mm outer dia all as specified.

S & F in repair PTMT grating doom 100mm dia (minimum weight 25gms)

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device.

S & Fixed in repair PVC valveless syphonic action type, flushing cistern 10 ltr capacity low level, white, with inlet ball valve, float and handle including brackets, flush pipe and all accessories all as specified.

S & F in repair, for vitreous china wash basin flat back of size 550x400mm pedestal pattern incl brackets, cutting for and pinning in ends or brackets, but excluding taps, waste, chain and plug and porcelain stopper complete all as specified.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S & Fixed in repair PVC 25mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod and heigh density plastic ball screwed for iron pipe fixed (minimum weight 25 mm-455gms).

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) all as specified.

M&L for 100 mm thick PCC 1:2:4 , type B1 using 20 mm graded stone aggregate as in floor even and smooth without using extra cement finished all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells, around transformers etc. all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises all as directed.

M&L for Light shade Vitrified Ceramic tile 10mm thick (Square/ rectangular) polished, area of each tile n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as specified and as directed.

All as per item No 85 above, but on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl backing coat of in CM 1:3 10mm thick complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 as bedding layer for floor finishes all as specified and directed.

All as per item No 105 above, but on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl backing coat of in CM 1:3 10mm thick all as specified and directed.

S & F Glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering in CM 1:4 , 10mm thick on fair faces of brick/concrete wall surfaces all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) all as directed.

S & F PVC (SWR) pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls all as directed.

All as per item No.110 herebefore but 110 mm

S & F PVC (SWR) branch piece, single (Y) equal or unequal 75mm bore with access door all as specified.

S & F PVC (SWR) bends any radius 75mm bore all as specified.

All as per item No.113 but 110mm bore all as specified.

S & F PVC (SWR) ‘P’ trap of 110/110mm all as specified.

S & F PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75mm dia all as specified.

S & F 110mm PVC (SWR) reducer all as specified.

S & F 110mm PVC (SWR) vent cowl all as specified.

Demolition of Brickwork of stone/boulder masonry, build incement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as specified.

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified.

M&L Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces on external surfaces finished even and fair all as specified and as directed.

Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick wall or on concrete surfaces ,finished even and smooth, without using extra cement complete all as specified and as directed.

M&L for preparing new surface of wall and applying two coats of Oil bound Distemper over a coat of alkali resistant primer and 3mm putty on new plastered surface complete all as specified and as directed.

M & L for preparation of new plasterd surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and directed .

M & L Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats all as specified.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F in repair 15mm bore stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F in 32mm dia waste coupling of PTMT (half or full thread) min wt 40gms all as specified.

S&F 15mm pillar taps of PTMT any colour screwed for iron pipe and fixed (min wt 15mm-110gms) all as specified.

S&F 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer all as specified.

S&F in repair 32 mm bore of pipe low density polythene pipe (LDPE) of pressure rating 6Kgf/sqcm fixed to wall or laid in floor etc including fittings complete all as specified and as directed.

PSK Enterprises