AGE I CGN 09 24 25 WELCOME MAINTENANCE OF OFFRS MD ACCN AT SECTOR-52 CG NOIDA UNDER AGE (I) CG NOIDA

Amount

Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick and removing the demolished material out of MOD land complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding, removing the rubbish off the premises of MOD land complete all as specified.

Dismantling Stone Slab including cement mortar bedding, removing the rubbish off the premises of MOD land complete all as specified.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm with shutters (Without taking off shutters from the frame)

Taking down Chowkhats or frames n exc 1.5 sqm each with shutters (Without taking off shutters from the frame)

Taking down shutters of any description n. exc 1 sqm

Dismantling boarding, any description fixed in any position fixed with screws complete all as specified and directed.

Dismantling wall and ceiling or insulation boards any thickness incl brackets and cover fillets complete all as specified and directed,

M&L brickwork with fly ash bricks, straight or curved on plan to any radius , built in half brick thick walls, old size bricks built in cement mortar 1:4 complete all as specified and directed.

M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors complete.

M&L for 10mm thick rendering for backing of tiles in CM 1:3 on fair faces of brick work or concrete surfaces.

M&L for 15mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete.

M&L for 20mm thick granite of any type) work (table rubbed and polished) in steps, jambs, pillars window cills and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust and jointed with Granite epoxy/silicone glue complete.

Rounding to edges of stone slabe one edge, such as steps, cooking platform and other similar situations and rubbing and polishing complete

M&L for non skid joint free coloured ceramic tiles 7 to 8mm this area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile complete all as specified.

M&L for 300x 600mm x 10mm thick Glazed coloured ceramic digital tiles in vertical surface in pattern or concept set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified & directed.

M&L for digital vitrified ultracharged tiles of any colour 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming.

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate etc complee all as specified. The rates include for one shop coat of priming.

S&F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl approved II class Hardwood lipping around complete all as specified and directed.

S&F 30mm thick 2nd class Hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc

S&F 25mm thick flush shutters, solid core construction, with particle board core and plywood face panels one face, commerical type on both sides complete.

S&F Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.

M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed.

S&F 300mm long stainless steel sliding door bolts with hasp and staple fixing clip and bolts of AISI 316 grade fixed to door with complete all as specified and directed. (MAKE : KICH/ARCH/Q-RAIL/D-LINE, prayag)

S&F 200mm long stainless tower bolts fixed to door with complete all as specified and directed. (MAKE : KICH/ARCH/Q-RAIL/D-LINE, prayag)

S&F stainless steel mortice handles of AISI 316 Grade 150mm long specified and directed. (MAKE : KICH Cat No 1916S or ARCH/Q-RAIL/D-LINE, prayag)

S&F stainless steel 100mm long floor door stopper fixed to door complete MAKE : KICH/ARCH/Q-RAIL/D-LINE, prayag)

S&F 15mm wide PVC door seal strip fixed with screws to door complete size as per door specification complete all as specified and directed.

S&F in repairs 15mm wide PVC door seal strip fixed with screws to door complete size as per door specification complete all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed to PVC door complete all as specified and directed.

S&F 150mm long aluminium anodised handles, extruded aluminium alloy fabricated type and fixed to PVC door complete all as specified and directed.

S & F butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type 100mm size C21 complete all as specified and directed.

Providing and Fixing factory made 18/19 mm solid WPC (wood polymer composite) laminated board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powders/rice husk/wheat husk) and non toxic additives, made from extrusion process WPC foam sheet single extruded(inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (Screw withdrawal strength of 2000N (face) & 1100 N (edge),minimum commissive of 50 N/mm2 ,Modules of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer free . water/Moisture proof and fire retardant to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both sides of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as direction of Engr-in-charge ,Material test certificate and authentication should be compulsory provide by the manufacturing company for Kitchen cabinets.

S&F 6 mm thick one side prelaminated decorative WPC sheet and other side plain in cupboard & like items inclusive of solvent cement & fixing at site complete all as specified and directed.e. Make- Rajshree or equivalent.

S&F Modular auto concealed soft closed hinges 35mm 110 degree size complete all as specified and directed.

S&F stainless steel handle 200mm complete all as specified and directed.

S&F stainless steel handle 150mm complete all as specified and directed.

S&F PVC tape 18mm wide with adhesive complete all as specified and directed.

S&F for Telescopic drawer channel rollers for shelves of size 300mm long complete stainless steel of grade 304 complete all as specified and directed.

S&F for Telescopic drawer channel rollers for shelves of size 500mm long complete stainless steel of grade 304 complete all as specified and directed.

S&F for anodisied aluminium snap grid of size 605 x 605mm frame work for false ceiling all as specified.

S&F Hangers 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified.

S&F 10mm thick multiwall (1 cell/2 wall) sandwich PVC sheet cut to shape and fixed in aluminium snap grid false ceiling complete.

S&F in repairs 19 mm dia draphery rods shall be made of stainless steel 19 mm dia pipe with decorative wooden finials and steel rings as per style SW-5 , grade J4 , gauge 20mm with final / side knobs ,including fixing half openable brackets BR 100mm long with tighting alanke nuts/ side end brackets, 10 Nos SS rings in one Rmtr ( in respective of complete accessories) all as directed. MAKE : VISTA / MAC . PAIR OF SUITABLE BRACKET & SHADE OF FINIALS AS APPROVED BY ENGR- IN -CHARGE.

Applying a coat of modified SBR latex waterproof coating on brick/concrete wall surface complete. Make (Dr fixit super latex or Fosroc nitobond SBR latex)

Taking down cement plastering of brick or concrete wall surfaces in cement mortar complete

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on ceiling surfaces including finished even and smooth without using extra cement.

M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

M&L for Preparing new plastered or unplastered ceiling surfaces and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

M&L for Complete removal of existing treatment to wall surfaces using electrical operated grinder and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm thick Birla Putty and primer complete all as specified and directed.

M&L for Complete removal of existing treatment to ceiling surfaces using electrical operated grinder and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of Synthetic enamel paint complete all as specifed and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces incl brooming down with steel wire brushing removing silt, efflorescence etc and applying one coat of white wash on wall.

M&L for Preparation of old decorated plastered or unplastered surfaces incl brooming down with steel wire brushing removing silt, efflorescence etc and applying one coat of white wash on ceiling.

S&F in repairs to aluminium door, window, and partition wall, job consisting of fixing of hinges, aluminium beads, cleats & rubber packing, including taking down and refixing of shutters/frame after repairing complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

M&L for two component polymer modified flexible cementitious waterproof (breathable) coating of equivalent flexible and elastic polymer modified, 2 component cementitious coating system having UV resistance applied in 2 coats in the form of slurry at right angles by way of brush at a total consumption of 2 Kg per sqm over the vertical brick wall, curing, testing etc completed including gola vata & joints treatment etc. complete all as specified and as directed.

M&L for providing protective levelling plaster for horizontal & vertical surfaces of average 15-20mm thick in cement mortar (1:4) including mixed with liquid integral waterproofing admixture @ 200 ml per bag of cement, finished smooth, curing etc. complete as specified and as directed.

Sanjay Associates

KRISHANA ELECTRIC WORKS

M/S BEE ESS ENTERPRISES

Shri Radhey Associates

DP COMPLEX

M/S R.S. Builders