Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-Finance | ₹7.0 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹7.0 L+₹2,035 (0.29%)Accepted-Finance | ₹7.0 L+₹2,035 (0.29%) | L2 | Accepted-Finance Accepted |
| 3 | L3₹8.0 L+₹96,855 (13.8%)Accepted-Finance | ₹8.0 L+₹96,855 (13.8%) | L3 | Accepted-Finance Accepted |
| 4 | L4₹8.1 L+₹1.1 L (16.2%)Accepted-Finance | ₹8.1 L+₹1.1 L (16.2%) | L4 | Accepted-Finance Accepted |
| 5 | L5₹9.3 L+₹2.3 L (32.2%)Accepted-Finance | ₹9.3 L+₹2.3 L (32.2%) | L5 | Accepted-Finance Accepted |
Tender Value
₹10.5 L
EMD Value
₹21,092
Closing Date
13 Nov 2020, 1:00 pmClosed
EE
LPWD DIVKLP
Providing Purely Temporary Kitchen and Dining Hall for Govt.JBS (Centre) at Andrott
2020_UTL_1354_1
40/NIT/KLP/2020-21
Open Tender
Civil Works
Item Rate
30 days
Lakshadweep
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
LPWD DIVKLP UTL
₹21,092
19 Nov 2020
3 Nov 2020
16 Nov 2020
3 Nov 2020
13 Nov 2020
3 Nov 2020
Amount
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m
Providing and laying cement concrete 1: 4:8 ( 1 cement: 4 M.Sand: 8 granite chips ) foundation and plinth.Stone aggregate 40mm nomonal size
Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position etc, sawn and put up in position: karimaruth or equivalent.
Providing Aluminium sheet roofing fixed with .galvnized iron Jor L hooks and 8mm dia C.I plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick.
Providing ridges or hips in Aluminium sheet roofing with G.I /J or L hooks bolts and nuts 8 mm dia G.I plain bitumen washers complete. 0.56mm thick.
Providing and fixing M.S welded mesh 50x50x mm in wooden frame with necessary nails ( frame work paid by seperatly)
Cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc…complete a) 40mm thick with 20 mm nominal size stone aggregate
Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap.
Providing and fixing white vitrous China kitchen sink with CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 40mm brass waste of standrad pattern 40mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White gazed fire clay kitchen sink size 600x450x250mm
Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work 25 mm nominal bore
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness .The laminate shall be molded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stay shall be provided at the bottom to steady the frame.
Providing and fixing to existing door frames. Providing and fixing to existing door frames. 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75x220mm mitre and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized M.S. tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver rame of suitable size, as per manufactures specification and direction of Engineer-in-charge. (For W.C. and bathroom door Shutter)
MOHAMMED NAZERBAPPATHIYOD
MOHAMMED ABDUL NASSAR
KACHIPPULLA
MOHAMMED HIDAYATHULLA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .