REPAIR TO PLASTERING, FLOORING, JOINERY, PLUMBING, INTERNAL FITTINGS AND FIXTURES, ROOF TREATMENT, BRICK WORK ETC AND MISC WORKS AT RAKSHA VIHAR, VIGYAN VIHAR, ADRDE COLONY AGRA UNDER GE (I) RND DELHI

Amount

Taking down cement plaster on brick/ stone walls etc any description incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on any faces of brick work in CM1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick/concrete surfaces in cement mortar (1:4) mixed with WPC as per manufacturer's directions finished surface even and smooth without using extra cement complete all as specified and directed. NOTE : WPC shall be measured and paid separately as supply only

M&L for rendering 10mm thick on concrete surfaces of ceiling in CM 1:3 and finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 3 coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for 3 coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying 2 mm thick wall care putty on walls/ ceilings (1 mm thick each coat) to obtain a smooth surface including making good any undulations on new surfaces complete all as directed.

M&L for applying two coats of oil bound distemper of approved tint over a coat of alkali resistant primer on walls including preparation of new plastered surface complete all as specified and directed.

M&L for applying two coats of cement base paint of approved tint on walls over a coat of alkali resistant primer including preparation of new plastered surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of Exterior emulsion paint of approved tint complete all as specified and directed.

M&L for complete removal of existing treatment on wall surface and applying two coats of white wash on old plastered surfaces of walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of Exterior emulsion paint of approved tint complete all as specified and directed.

M&L Complete removal of existing treatment of wall including cornices etc and making good the surface and filling holes and applying two coats of oil bound distemper of approved tint over a coat of primer all as specified and directed.

M&L for preparation of old painted wood and wooden based surface of any description not otherwise discribed over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for one coat of synthetic enemel paint on old painted steel surface of any description over 10cm width or girth including preparation of surfaces complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F in repair mild steel work as in framed brackets of angles or tees with web and flanges out to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc n.exc. 10 Kg each bracket conforming to Fe-410 or Fe-310-0 complete all as specified and directed.

M&L for 40 mm thick sand stone slabs in shades, Chajjas, shelves etc. n.exc 2m in length, Punched dressed on face and along exposed edges self faced on other side and set in cement mortar 1:4 anf pointed in CM 1:2 including taking down/dismantling old unserviceable sand stone complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth in brick walls complete all as specified and directed.

M&L 25 to 30 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top at bottom of stone and drilling holes for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed

M&L for refastening and securing ends of balusters, newels, rag bolts etc, let into stone and grouted in cement mortar including resecuring the mortices and regrouting in cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any descriptions exc 1 Sqm and n.exc 2 sqm each complete all as specified and directed.

Refixing shutter in same opening exc 1 Sqm & n exc 2 sqm each complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

All as per ser item No. 26 but 125x60mm size of frame

S&F for 35mm thick 2nd class hard wood factory made plain framed panelled shutter (any number of panels), with lock rail and panel of 12mm thick BWP commercial ply or veneered particle board with commercial veneering on both faces. The sizes of rails and stiles as per IS:1003 (Part -I) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood factory made glazed and skeletan shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers provided with stiles and rails compete all as specified and directed.

S&F for 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutter complete all as specified and directed.

S&F factory made steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete as specified and directed.

S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F in repair framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Grade E-165 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR complete all as specified and directed

S&F factory made PVC door frames of size 50mmx47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition compete all as specified and directed.

Blank

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. width of flaps (when open) 30mm complete all as specified and directed.

S&F Mild steel 300 mm ordinary rat tail rod pattern springs incl roller and roller plate complete all as specified and directed.

S&F in repairs Mild steel 300 mm ordinary rat tail rod pattern spring incl roller and roller plate complete all as specified and directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled fixed complete all as specified and directed.

S&F 300 mm long Aluminum alloy, anodised sliding door bolt\, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F in repairs 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

All as per ser item No 45 but 100 mm size.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 150mm aluminium handles, fabricated type, D shape, anodised and fixed complete all as specified and directed.

S&F in repairs 150mm aluminium handles, fabricated type, D shape, anodised and fixed complete all as specified and directed.

S&F for 150mm extruded brass handles fabricated type polished fixed in cup boards complete all as specified and directed

S&F 140mm long floor door stopper aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs 140mm long floor door stopper aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F in repairs door closer aluminium (die cast) body hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 Kgs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips providing and fixing new ones complete all as specified and directed

S&F for 3mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed.

S&F for 4.8mm thick Sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq m in each pane complete all as specified and directed.

S&F for 4mm thick figured glass, pin headed type and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description,over 10cm in width or girth, including preparation of surfaces all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description,over 10cm in width or girth, including preparation of surfaces all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) including necessary form work as path, passages, etc, surface finished even & fair and spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified & directed.

M&L for 50mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection laid in panels n exc 3 m in length incl necessary formwork complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in floor finished even and fair complete all as specified and directed.

M&L for Ist quality Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm laying in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Ist quality glazed ceramic coloured tiles of size 300x200x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Ist quality Non Skid ceramic coloured tiles 7mm to 8mm thick, area of each tile exc 0.18 Sqm but n. exc 0.38 Sqm laying in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Coloured Chequered cement concrete tiles 25cm x 25cm x 22mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick work or concrete tile (laid flat or on edge) laid in floor, channel, kerb, apron etc. laid dry complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade laid in floors over sand cushioning complete all as specified and directed. Note : Sand shall be measured and paid for seperately.

M&L for sand filling under floor including spreading, levelling, watering etc. complete all as specified and directed.

M&L for fully vitrified tiles light shade 10 mm thick (square or rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like over and including 20mm thick screed bed in screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for Kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary rubbing and polishing over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary rubbing and polishing over and including 15 mm thick screed bed/plaster in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L 40mm thick brick tiles and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for screed bed 10mm thick in CM 1:4 mixed with water profing compound @ 3% by weight of cement or as per manufacturer's instruction complete all as specified and directed. Note : WPC shall be measured and paid for seperately.

M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforced with following as given here under over the prepared roof surface by applying a coat of cold bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface and a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm and applying further treatment as under:- (i) M&L for a layer of APP based polymeric membrane minimum weighing not less than 3kg/sqm and minium 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms) and on primed surface by forced application complete all as specified. (ii) M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces. Note:- Ther rate includes ponding test with filling of water for continuous 48 hours all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in padding bed plates or mass concrete complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

All as per ser item No. 83 above but 20mm dia.

All as per ser item No. 83 above but 25mm dia.

S&F for 25mm dia CPVC pipesSDR 11 & plain CPVC SDR 11 fittings laid on walls/ceiling or laying in floors complete all as specified and directed.

S&F for 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings laid on walls/ceiling or laying in floors, complete all as specified and directed.

S&F in repair 20mm bore ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm Stop valves cast copper alloy Chromium plated fancy type long shank concealed type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore bib taps standard of PTMT of any colour high pressure screwed for iron pipe and fixed ( minium weight 15mm - 90gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMTof any colour high pressure screwed for iron pipe and fixed ( minium weight 15mm - 90gms) complete all as specified and directed.

S & F in repairs Vitreous china squatting pan, Orissa pattern , size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including 110mm PVC (SWR) WC connector with lip ring and PVC (SWR) P/S trap 110mm complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet pan (Padastal pattern), white (excluding fixing bolt,flushing coistern and flush pipe) complete all as specified and directed.

S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinge device complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type low level white flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve, and handle including bracket complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size 630x450mm excluding taps,waste,chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type, white (excluding flushing cistern,flush pipe and waste pipe )complete all as specified and directed.

S&F for 40 mm bore low density polyethylene pipe of pressure rating 6Kgf/sqcm complete all as specified and directed.

S&F for 40 mm bore low density polyethylene pipe with waste coupling for sink complete all as specified and directed.

S&F for 32 mm bore low density polyethylene pipe with waste coupling for wash hand basin complete all as specified and directed.

S&F in repair pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minium weight - 120 gms) complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 25mm bore ,minimum weight 455 gms complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore weight 455 gms complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90 mm complete all as specified and directed.

S&F in repair Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gm) complete all as specified and directed.

S&Fin repairs grating square 150mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&Fin repairs grating doom 150 mm dia with waste hole of PTMT. (Minimum weight 100 gms) complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F for 32mm waste coupling of PTMT (half or full threaded) minimum weight 45gms for urinals complete all as specified and directed.

S&F for 40mm waste coupling of PTMT (half or full threaded) minimum weight 45gms for sink complete all as specified and directed.

S&F in repair bottle trap 32 mm bore of PTMT having minimum water seal 25 mm and minimum weight 260 gms for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repairs PVC 75mm (SWR) floor trap, plane with grating including jointing with solvant cement complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

All as per ser item No. 119 but 75mm bore.

S&F for 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F for 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S& for 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and walls of cement concrete and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 as required (superficial area n.exc 150 Sqcm) complete all as specified and directed.

S&F in repairs 1 mm thick stainless steel plate rack for utensils of size 600 x 600 x 250 mm of approved pattern and design complete all as specified and directed.

S&F in repair 1 mm thick polished stainless steel 25 mm dia curtain rod fixed with decorative brackets complete all as specified and directed Note :- Brackets shall be measured & paid for separetely.

Supply only 1 mm thick polished decorative brackets of approved pattern for stainless steel pipe 25 mm dia complete all as specified and directed.

deva engineers

M/S RISHI RAJ AGRAWAL

PD GUPTA AND COMPANY