PROVISION OF CGKG SCHOOL AT CG LAND CHICOLNA, GOA

Amount

SCHEDULE ‘A’ PART-I (BUILDING & STRUCTURE WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( SITE CLEARENCE, EARTHWORK AND EXCAVATION ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/ PATH/ HARDSTANDING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIiI (COMPOUND WALL/ FENCING/ GATE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (STAGE & FLAG MAST) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (COOLING APPLIANCES) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XI (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.

INTERNAL WATER SUPPLY Supply & fixing 15mm dia Two way bib taps (Fancy type),cast copper alloy with crutch or butterfly handle, screwed down,screwed for iron/CPVC pipes complete all as specified.

Supply & fixing of Health faucet with wall hook Make Hindware Model No F160027 or equivalent 15mm dia.

INTERNAL ELECTRIC SUPPLY: S&F Electric gong bell, AC. 230 volts, single pole all as specified & directed

Supply and Fixing surface mounted LED batten 10W with extruded aluminum housing heavy duty integrated electronic driver, surge protection more than 2 KA and THD<10% Make: Havells Cat Part No: ENDURALINEAR0BS10W LED865SPCSS /WIPRO/PHILLIPS/BAJAJ

Supply and Fixing surface mounted LED batten 20W with extruded aluminum housing heavy duty integrated electronic driver, surge protection more than 2 KA and THD<10% Make: Havells Cat Part No: ENDURALINEAR0BS20W LED865SPCSS /WIPRO/PHILLIPS/BAJAJ

S & F BEE energy efficient BLDC high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a down road of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed.

S & F energy efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed.

S & F Vertical triple pole & neutral (VTPN), double door, 8-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP MCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed.

External Water Supply: M/L for Cutting the existing DI pipe 100 mm dia and inserting Tee (100x50 mm) for taking branch connection including screwing, excavation, earth work etc.

Material and Labour in repairs for construction of valve chamberof size 900 X 900 X 900MM depth (inetrnal dimension) with PCC foundation in the ratio 1:4:8 brick work in cement motor in the ratio 1:4 using class B bricks,.PCC coping at the Top in the Ratio 1:2:4; Plastering 15mm thick in the ratio 1:4 including painting with antifungal paint of 2 coats inside and out side the wall of chamber including MS sheet cover 3 mm thick with angle iron frame 25 x 25 x 4mm, locking arrangement complete with painting on steel surfaces with one coat of red oxide paint over two coats of synthetic enamalled paint all as specified and and directed.

External Electric Supply: Supply install test and commission LT Panel board, TPN 415 Volts, 50 Hz, 200 Amps capacity, oudoor cubical type floor mounted factory made double door dust and vermin froof fabricated out of CRCA sheet not less than 3.15 mm thick fixed on angle iron frame made out of 50x50x6 mm with cable chamber for individual feeders for incomming and outgoing connections, one set of indicator lamp RYB with switch and fuse, multifunction intelligent panel meter etc and with the followings :- INCOMING:- (a) MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 35 KA - 1 No (Incoming) OUTGOINGS:- (a) MCCB 4 Pole, 415 V, Adjustable type, 32 Amps with breaking capacity 16 KA -03 Nos (01 Spare) (b) MCB TPN, 415 V, Adjustable type, 40 Amps with breaking capacity 25 KA - 02 Nos (c) Analog Time switch with contactor for 24 Hrs setting 1 phase, 15 Amps of - 01 No

COOLING APPLIANCES: Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilizerd at 230 V with accuracy of +2.5% and of capacity 2.0 KVA

STEEL GATE: Material and labour for preparation of new plastered surfaces of wall and applying two coats of acrylic paint over a coat of primer complete all as specified and as directed.

PLAY GROUND: S & F FRP Revolving platform Merry Go Round Diameter – 5Ft. HEIGHT – 4Ft. All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge, 2 coating are red oxide and final paint of industrial paint, Nut bolt GI Bearing heavy, (branded.) FRP thickness 4-5mmto be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M20 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (the cement concrete and excavation work shall be paid separately).

S & F 2 Seater Sea Saw Length – 8 ft. Width – 5 ft. Height – 2 ft. All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge 2 coating are red oxide and final paint of industrial paint, Nut bolt GI FRP thickness 4-5mm to be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M20 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (the cement concrete and excavation work shall be paid separately).

S & F Standing Triple Twister to be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M20 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (the cement concrete and excavation work shall be paid separately).

S & F Tube Tunnel Length – 15 ft. Width – 3 ft. Height – 8 ft. All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge 2 coating are red oxide and final paint of industrial paint, Nut bolt GI, FRP thickness 4-5mm to be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M20 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (the cement concrete and excavation work shall be paid separately).

S & F Horse spring Rider Length – 2.5 ft. Width – 1.5 ft. Height – 2.5ft. All round and rectangular pipes are GI or CR, ISI make Gauge 14 gauge 2 coating are red oxide and final paint of industrial paint, Nut bolt GI FRP thickness 4-5mm to be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M20 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (the cement concrete and excavation work shall be paid separately).

FRP benches Material: Leg Support Cast Iron Approx Weight 45 To 50kg Sitting Capacity: 2 to 3 Persons Size: L 5’ X W 2.5’ X H 2.5 to be approved by Engineer-in-charge. The equipment shall be fitted with inbuilt limiters. The equipment shall be fixed on ground with concrete of minimum strength M20 and J shaped welded bolts made of 18mm galvanized rod and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. (the cement concrete and excavation work shall be paid separately).

FLAG MAST: M& L for stainless steel round pipes of grade 304, upto 150 mm dia for flag masts, railings, posts etc including cutting to size, erecting in position and welding/ brazing all as specified and directed.

M& L stainless steel 3/4" chain attached with bottom of balusters shown in drawing all as specified and as directed.

Modern Engineering Co

S.N. Constructions

VIRENDRA FABRICATORS