Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9 LAccepted-AOC | L1 | Accepted-AOC Accepted and awarded the contract being L1 Bidder | |
| 2 | L2₹9.8 L+₹83,185 (9.24%)Rejected-AOC NO 221 FIRST FLOOR SHAKTHI GRANITE BUILDING NEAR DRDO PHASE II KAGGADASAPURA CV RAMAN NAGAR BANGALORE KARNATAKA 560093 | BENGALURU URBAN | KARNATAKA | 560093 | L2 | Rejected-AOC Rejected due to L2 Bidder | |
| 3 | L3₹9.9 L+₹92,110 (10.2%)Rejected-AOC | L3 | Rejected-AOC Rejected due to L3 Bidder | |
| 4 | L4₹10.1 L+₹1.1 L (12.1%)Rejected-AOC | L4 | Rejected-AOC Rejected due to L4 Bidder |
Tender Value
₹9.8 L
EMD Value
₹19,520
Closing Date
19 Oct 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
INDU C
Estate Management Unit DRDO Township, C V Raman Nagar, Bangalore-93
Repairs to Transit Facility at DFRL, Mysore
2022_DRDO_715395_1
EMU/BAN/CM/17/2022-23
Limited
Civil Works
Item Rate
150 days
DFRL Mysore
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Yes
Estate Manager EMU RnD Bangalore
₹19,520
Yes
10 Nov 2022
29 Sept 2022
20 Oct 2022
29 Sept 2022
19 Oct 2022
29 Sept 2022
Amount
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Supplying and laying approved make and shade anti skid ceramic tile of thickness upto 6mm and size 300x300mm for flooring laid on 20nn thick cement mortar of 1:4, jointing with grey cement slurry @ 3.3kg/sqm, including curing and pointings with white cement and matching pigment etc., complete all as directed by the Engineer.
Providing and fixing with approved make not less than 6mm thick glazed ceramic tiles of size not less than 300x 400mm of approved shade and make over and including 12mm thick cement plaster 1:3 (1 cement: 3 coarse sand) and jointed with white cement mixed with matching pigment in dado etc., complete all as directed.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
Providing and fixing to existing door frames. 30 mm thick Fiber glass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in- Charge.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
Providing and fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
For fixed portion.
For Shutter Portion.
Providing and fixing glazing With float glass panes of 5.0 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge.
Providing and fixing the following hardware fittings of approved make.
Aluminium handles, powder coated, ISI marked to required colour or shade with necessary screws etc., complete. i) 125mm long handles.
Powder coated ISI marked tower bolt to required colour or shade with necessary screws etc., complete.for following sizes.
ii) 150x10mm
Aluminium hanging floor door stopper ISI marked powder coated to required colour or shade with necessary screws etc., complete.
i) Twin rubber stopper
Brass CP mortice lock six levers handles of Godrej / Dorset or equivalent make with necessary screws etc., complete for single door.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : a) Of area 3 sq. metres and below
Dismantling G.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : a) 15 mm to 40 mm nominal bore
Credit for the serviceble material obtained from the above items
Removing the all kinds of Sanitary fittings like EWC, Urinals, wash hand basins including stacking of items within 50 metres lead as per direction of Engineer-in-charge
Supplying and fixing European Water closet with cistern set comprising of.
a) White vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required
b) 15mm CP brass stop angle cock fixed between GI and PVC inlet.
c) 15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts with washer at both ends.
Supplying and fixing in position best quality & approved make C P toilet paper roll holder with necessary C P brass screws and washers fixed to wall etc.,complete all as specified and directed.
Supplying & fixing in position best quality & approved make C P soap container necessary including C P screws and washers fixed to wall etc., complete all as specified and directed.
Supplying and fixing in position cast iron Nahani traps with CP grating including connection with CI waste pipe including 150mm dia thick CC 1:2:4, for embedding the trap, plastering curing etc.,complete all as specified and directed.
Supplying and fixing of CP Health faucet of Jaquar make CAT NO.573 or equivalent make with 8mm dia and flexible tube wall hook, and angular stop cock etc., complete.
Supplying and fixing wash hand basin suit comprising of:
White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
15mm heavy quality flexible PVC inlet connection with CP brass hexagonal check nuts with washer at both ends.
15mm CP brass stop cock fixed between CI outlet and PVC inlet.
32mm heavy quality CP brass waste coupling with rubber plug and CP chain.
CP bottle trap with 32mm medium quality GI waste pipe with special from extension piece of the bottle trap to the floor trap, including necessary chasing the wall and floor and making good the same etc.,
Supply, installation , testing and commissioning of shower unit including 4 way diverter with single lever , spout and shower head with necessary fitting of approved make etc. Complete with all CP wall flanges
Providing and fixing in position best quality of approved make 15mm CP brass stop cock for geysers with necessary screws etc.complete.
Supplying and fixing in position best quality and approved make heavy quality screws down gun metal gate valves with hand wheel of the following sizes fixed to service lines including testing, making good the leakages, if any etc., a) 25mm
Supplying and fixing in position best quality CP towel rod of ESSCO CAT NO.1111 or approved make and length 600mm long with a pair of brackets flanges fixed to wall with necessary plugs screws , washers etc., complete.
Providing and fixing Towel Ring of Jaguar AKP-35721P 215 mm long, 200 mm wide with minimum distances of 3 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
Supplying, laying, jointing, testing and commissioning; uPVC(SWR) pipe (Type-B) as per IS : 13592/1992 including specials of best quality and approved make fixed to wall/floor including chasing, cutting, making the hole in walls/floors, cutting the pipes to the required size of length jointing the pipes and specials with suitable resin and testing etc.,complete all as specified and directed. (Specials at junctions must have access doors wherever required.) a) 100mm dia
INTERNAL ELECTRIFICATION
Supplying and fixing rigid Non metallic PVC conduit 25mm dia medium grade along with accessories in surface/recess including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, making good and painting as required etc, cutting not exc 10 cm girth. Complete all as specified and directed.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
a) 2 x 2.5 sq. mm
b) 4 x 2.5 sq. mm
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required
Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
3 Module (100mmX75mm)
6 Module (200mmX75mm)
8 Module (125mmX125mm)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
a) 5/6 amps switch
b) 3 pin 5/6 amp socket outlet
c) 15/16 amp switch
d) 6 pin 15/16 amp socket outlet
e) Bell push
f) Telephone Socket outlet
g) TV antenna socket outlet
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
Supply of the following type LED/Fluorescent/ Compact fluorescent light fixtures on wall/ Ceiling including all fixing accessories such as leads, etc complete as required.
40 W Ceiling/Wall mounted LED 4 Feet Length Luminaire (Philips : BN308C LED40S-6500 L120 PSU WH )
5 W Surface Mounted LED Luminaire (Babjaj :BCLSB 05 WH)
Decorative wall bracket bed side Light Fixture Antique
Sechdule of Credit for Aluminium Scrap
Sechdule of Credit for PVC/FRP Scrap
Sechdule of Credit for Iron Scrap
JAI JAWAN JAI KISAN ENTERPRISES PVT LTD
VISION ASSOCIATES
SMS ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .