Repair works for the Port Community Hall at Zone-B in VOC Port.

Amount

Dismantling Barbed wire or Flexible wire rope in fencing including making rolls and stacking them within a lead of 100m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers

Dismantling and removal of Plain Cement Concrete (PCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.

Earthwork in bulk excavation in dense (or) hard soil (exceeding 30cm in depth, 1.5m in width as well as 10 Sqm. on plan) including disposal of excavated soil lead upto 50m, disposed soil to be levelled and neatly dressed etc., complete complying with AISS and as directed by the departmental officers.

Providing and laying Plain Cement Concrete 1:4:8 (One part of cement, 4 parts of M. Sand (Crushed Stone Sand) & 8 Parts of 40 mm nominal size metal ) for foundation using 40 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers.

Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers.

Plastering the Brick work 15 mm thick in Cement Mortar 1:3 (Plastering Sand (P-Sand)) (One cement, three Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.

Supplying and laying in trenches 25 mm dia. PVC inflow pipe line 10 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.

Supplying and laying in trenches 50 mm dia. PVC inflow pipe line 10 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.

Supplying and laying in trenches 110 mm dia. PVC inflow pipe line 6 Kg./CM2 with necessary pipe specials such as elbow, tee, union joint etc., and the joints being tightened including threading cost of pipe, specials etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing in position of best Indian make heavy duty Gun Metal Wheel Valve at 25mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers

Supplying and fixing in position of best Indian make heavy duty Gun Metal Gate Valve at 50mm dia. of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing in position 15mm dia. Heavy type Brass Chromium Plated Pillar tap of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing in position 15mm dia. SS Long lever water tap of approved quality including all materials, labour, fixing charges, etc., complete and as directed by the departmental officers.

Supplying and fixing of G.I. Barbed wire 10 gauge (6Rm. / Kg.) two ply three points confirming to I.S. Code No. 278 -1962 Type - I, straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanised mild steel wire, stapples or steel pins etc., for horizontal and tying with the fencing / M.S angle post using G.I steel wire including all materials, labour, tools etc., complete complying with AISS and as directed by the departmental officers.

Providing and fixing in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 6 mm thick of wall tiles over the existing wall up to 2.50 m height by chipping the wall surfaces wherever required and fixing with approved colour and quality of tiles including all materials, labour, equipments etc., complete complying with AISS and as directed by the departmental officers.

Providing and fixing granite slabs (jet black) of 20mm thick (super fine polished with nosing edges) on the steps area of building, in between urinals and wherever required in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)). The rate inclusive of costof granite slab, chemical component, white cement, labour charges & conveyance etc., complete and as directed by the departmental officers.

Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer).

Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing Solid Panel PVC door with frame - Supplying and fixing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter etc., complete and as directed by the departmental officers.

Providing, Supplying and Laying factory made Chamfered edge Cement Concrete 60mm thick Paver block of M-35 grade with approved colour, design & pattern of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & patten over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver block to the required size and pattern, finishing and sweeping extra sand etc., including all materials, labour, tools & plants, conveyance etc., complete and as directed by the departmental officers.

Collection and Supply of good quality Red earth from Vagaikulam and conveying by road with an average lead of 26 KM & stacking at site for pre-measurement including cost of materials, conveyance of red earth, labour, tools & plants etc., complete and asdirected by the departmental officers.

Collection and Supply of good quality Cow dung manure (well dried manure) from Tuticorin town and conveying by road with an average lead of 13 km & stacking at site for pre-measurement including cost of cow dung manure, conveyance, labour, tools & plants, etc., complete and as directed by the departmental officers.

Mixing of Red earth and Cow dung manure for spreading and leveling the plantation area for required thickness including labour, tools & plants, etc., complete and as directed by the departmental officers.

Supplying and laying of Mexican Carpet grass (Ready made sheet) at site for transplanting in the lawn area. The rate shall include transportation, loading, unloading of grass carpet along with underlying rooting medium without damaging the roots etc., complete and as directed by the including cost of Mexican Carpet grass (Ready made sheet), labour, tools & plants, etc., complete and as directed by the departmental officers.

Supply and planting of ornamental plants for gardening (i.e.) Alamanta, Ficus, Mosantha, Xeroa, Blue Marica, Jet ropa, Cactus, Crotons, Yellow palms, X Mas tree to a minimum height of 2.5 feet including cost of saplings, labour, tools & plants, etc., complete and as directed by the departmental officers.

Supplying and fixing of MS Manhole Cover 60 x 60cm Heavy Duty with Frame Cover with necessary locking arrangements with hinges, handle, other required fittings with open and close type arrangements to cover the existing manhole in Port area including cost of all materials, lock, labour, fabrication charges, conveyance etc., complete and as directed by the departmental officers

Supplying and fixing of 1000 litres capacity Sintex double layer water tank with approved brand including cost of PVC water tank, making connection with input and output water pipe line and valves. Cost inclusive of all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers.

Painting the steel surfaces with One coat of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.

Applying one coat of Synthetic Enamel paint (excluding priming coat) on previously painted wood and wood based surfaces interior to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and including cost of Synthetic Enamel Paint and labour charges etc., complete complying with AISS and as directed by the departmental officers.

Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Applying TWO coat of Exterior (APEX) of approved quality over the existing wall surface in all floors to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surfaceeven and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Shri Venkateswara Constructions

SURYA ENTERPRISES

Mahaaraja Engineering Contractor

SRI BALAJI CONSTRUCTION

BETHELEHEM ENGINEERING WORKS

vairamuthu