CONSTR OF 04 X GRAZIER HUTS

Amount

Surface excavation n exc 30 cm and averaging 15 cm and getting out in any type of soil.

Execution in post holes (or similar holes) each not exceeding 0.5 cum getting out retaining filling in and ramming earth broken rubble mixed with earth around in layer not exceeding 25 cm soft/ loose soil.

M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete.

M&L hard core of gauge exc 63mm but not exc 100 mm depoted, spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface broken stone or boulders.

Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point.

Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25cm.

S&F powder coating of any wooden window and ventilator side hung type without sash bars wooden section weighting 0.55 kg/m including necessary joining cleats glazing clips rubber packing rubber packing including all fitting complete all as specified and directed.

S&F powder coating of any wooden frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in n.exc 0.5Sqm each pane.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified.

S&F Pre-painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / fixed with self tapping screws as specified.

S & F wooden work of size 600mm x 600mm frame work for ceiling with Wooden tee section of size 23.5mm x 26.4mm x 1.4mm thick and wooden angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long all as specified and directed.

M&L Preparing new ceiling and applying two coats of oil bond distemper complete as specified and as directed.

M&L Ilnd class clean sawn hard wood 30 mm thick with butt joint planed both side fixed with nails in any situation.

M&L Ilnd class clean sawn hard wood scantling Timber framed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over one coat of pink primer over 10cm width of girth including preparation of surfaces.

S&F pressed wooden door frame with one or more rebates including necessary fixing lugs hinges lock strike plates complete as specified and directed.

M & L PCC type C-1,1: 3:6 (20mm graded stone aggt) as in foundation, Bed concrete, filling sub base, surface channels and mass concrete etc.

M&L for 35mm thick II nd class hard wood made at site plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.

S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F, 125 mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F 300mm long aluminum alloy anodised sliding door bolts, with haps and staples (bolt type) and fixing clips of sheet, cast oions or cast aluminum alloy and fixed. with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directe.

M & L for 40 mm thick PCC 1:4:8, type B-2, (using 12.50 mm graded stone aggregate) as in under layer of wooden flooring & finishing the surfaces rough to receive screed bed complete as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each wooden exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over 20mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

Surface and wall mounted LED tube rod 15 watt, 1600 lumens output with suitable fitting frame. Frame shall be powder coated with aesthetically designed dual colour ends caps with bipin holder, connector block complete. (Make - Bajaj / Havells / Philips)

Bulb 09 watt with Angle Holder.( Make - Bajaj / Havells / Philips)

Plastic Body Wall Mounting Fan of 400mm sweep.

Exhaust Fan 300mm sweep, ISI marked and louvers. (Make - Khaitan / Usha / Bajaj / Polar / Orient).

Ceiling Fan 1200 mm sweep with 5 step fan regulator one modular conforms to IS : 2312, ISI marked with double ball bearing with modular fan regulator. Fan hooks with MS clamps, bolts and nuts. Make : Fan - Khaitan / Usha / Bajaj / Crompton Greaves.(Modular Fan Regulator : Havells / Legrand).

PVC sheathed, unarmored, stranded, copper conductor flame proof cable of size 1 sqm dia conform to IS 694/1990 (green in color of 90 m roll). (Make - Havells)

PVC sheathed, unarmored, stranded, copper conductor flame proof cable of size 1.5 sqm dia conform to IS 694/1990 (red / black in color of 90 m roll). (Make -Havells)

PVC sheathed, unarmored, stranded, copper conductor flame proof cable of size 2 core 6.0 sqm dia conform to IS 694/1990 (red / black in color of 90 m roll). (Make - Havells)

Modular Switch Piano Flush type 6 Amps 240 volts single pole one way. (Make : Havells / Legrand)

Modular socket outlet multipurpose 2 in 1. 6 Amps. Make : Havells / Legrand

Surface mounting plastic boxes suitable for modular switches 12 module of Size 8" x 6". (Make : Havells / Legrand)

Combined Cover Plate with frame (inner & outer) white suitable for modular switch / socket of 12 module. (Make : Havells / Legrand)

Ceiling Rose, surface bakelite, 65 x 50mm, 2 to 3 terminals. (Make - Anchor / Crabtree)

25mm PVC casing capping, not less than 2 mm thick. With all material . (Make - Suncab / Polycab / Indoplast / Surya)

MCB 40 A DP with Box , 240 Volt, breaking capacity 10kA, conform to IEC-60898 (2002) and IS 8828 (1996). (Make - Havells / Indo Asian / Legrand)

M/S. MATA VAISHNO DEVI ENTERPRISE (BID ID -3348723)

BINA GHOSH (BID ID -3347981)