Development of 20 Bedded Modular Medical Intensive Care Unit (MICU), 20 Bedded Modular Critical Care Unit (CCU) and 20 Bedded Modular Intensive Care Unit (ICU) Phase-I at J. J. Hospital, Mumbai.

Amount

Medical Equipments Work

Wall & Ceiling system in SICU, Post OP & Recovery unit:-Supply, Installation, Testing & Commissioning of Wall Panels in SICU, Post OP & Recovery unit as per tender technical specification & this BOQ

Wall & Ceiling system in SICU, Post OP & Recovery unit:-Supply, Installation, Testing & Commissioning of Ceiling System in SICU, Post OP & Recovery unit as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Antistatic & Conductive Flooring in SICU, Post OP & Recovery unit as per tender technical specification & this BOQ

Flooring:-Supply, Installation, Testing & Commissioning of Homogeneous Flooring Corridor, Scrub area, Surgeon room and server room as per tender technical specification & this BOQ

Hospital Doors:-Supply, Installation, Testing & Commissioning of Operation Theatres door’s Automatic Single Leaf lead lined Sliding door with SS 304 door blade surface, each 2100 mm x 1500 mm as per tender technical specification & this BOQ

Hospital Doors:-Supply, Installation, Testing & Commissioning of SS 304 Doble Leaf Door Size 1000 x 2100mm as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Storage cabinet system as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of X-Ray Viewing System as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Magnetic Writing Board in each operating theatre. It should be made of ceramic having Magnetic properties and should be flushed to the wall of the operating room as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Scrub Sink 2 Bay as per tender technical specification & this BOQ

Electrical:-Supply, Installation, Testing & Commissioning of UPS :10KVA ON Line 30 Min Back up as per tender technical specification & this BOQ

Electrical:-Supply, Installation, Testing & Commissioning of Isolation Power Supply with DIPS system/ QIPS System as per tender technical specification & this BOQ

HVAC:-Supply, Installation, Testing & Commissioning of Split Air- conditioning units 1 Ton as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Hand Rail Crash Guard System as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Corner Guard Protection System in OT complex as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Ambient Lights in SICU, Post OP & Recovery unit as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of nursing station(4000mmX750mm) as per tender technical specification & this BOQ

Sliding Door:-Supply, Installation, Testing & Commissioning of Sliding door 1200 x 2100 mm as per tender technical specification & this BOQ

Sliding Door:-Supply, Installation, Testing & Commissioning of Sliding door 1500 x 2100 mm as per tender technical specification & this BOQ

Sliding Door:-Supply, Installation, Testing & Commissioning of Sliding door 1800 x 2100 mm as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Sliding door 900 x 2100 mm as per tender technical specification & this BOQ

Supply, Installation, Testing & Commissioning of Horizontal Head Panel-1200mm up to 2 Gas Outlets, 1500mm for up to 4/5outlets configuration and 1800mm for 6/8 Outlet configurations along with electrical switches.

SITC of Hospital Nurse Call System:-SITC of VDE 0834 certified/ approved System Switch The system switch forms a decentralised communications node for exchanging data between the connected system devices and the rest of the communications system, consisting of : - 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX), galvanically isolated conforming to EN 60950 and VDE 0834; - 7 x RJ45 sockets, each for a 100Mb IP system port (IEEE802.3 100BaseTX) for connecting all IP capable system modules; - 1 x RJ45 socket, 100Mb IP Port (IEEE802.3 100BaseTX) for connecting communications, staff and ward terminals as well as control panel PCs or for redundant Connection. - Control LEDs for indicating the current operating state; - 2 x RJ45 sockets for connection of the external data bus; - All IP system modules are supplied with power using Power over LAN technology; - In case of Failure of System switch Not more then 20 Rooms or 30 beds should be affected.

SITC of Hospital Nurse Call System:-SITC of VDE 0834 certified/ approved Patient Handset - Without Speech consisting of a plastic case in antimicrobial finish having - Call button with nurse symbol with integrated finder and reassurance light on the top end of the unit, - Membrane keypad in antimicrobial finish with integrated LEDS for operation, consisting of: -1 call key, - 2 lighting keys - 2.80 metre connection cable with auto-disconnecting RJ45 connector plug. It shall be supplied with cradle for holding patient terminals.

Supply of VDE 0834 certified/ approved connection module for Patient Terminal-without speech Connection module for patient handset shall consist of: - 1 x RJ45 socket marked in colour and with measures to ensure that the push button is correctly connected, including auto disconnect mechanism, - 1 membrane keypad with: - 1 call button (red with nurse symbol) including a finder/ reassurance light, - 1 presence key/ cancel button (green) including a control LED,

Supply of VDE 0834 certified/ approved Code Blue Call VDE 0834 complied Pull cord shall consist of : - Antimicrobial Membrane keypad with 1 Code Blue Call button (Blue) incl. finder . reassurance light and 1 cancel button incl. control LED, - Integrated piezo buzzer - 2 x RJ45 sockets for connecting to the IO bus - Incl. an installation frame for screw-free attachment with countersunk back box

SITC of module providing DVI output Module to provide DVI output to connect with any 3rd party LCD/LED monitor to display nurse call notification on external LED/LCD screen. (Note: LCD/ LED screen to be provided by client)

External LED Monitor for displaying Nurse Call status Minimum 20" LED wall/ ceiling mounted screen having DVI input port

Supply of VDE 0834 certified/ approved Lamp Module For optical indication of calls, presences and reminders in the relevant colours conforming to VDE0834 consisting of: - 4 light chambers with light reflectors for homogeneous illumination, - 1 light chamber fitted with 3 ultra bright red LEDs, - 1 light chamber fitted with 3 ultra bright white LEDs, - 1 light chamber fitted with 3 ultra bright green LEDs, - 1 light chamber fitted with 3 ultra bright blue LEDs, - the LED life expectancy is approximately 100,000 operating hours,

Networking & Integration Supply of Management center - Nurse Call Server Management Centre Server for Nurse Call System for uploading the firmware and the system configuration, for operating interfaces to foreign systems, for logging of all system events and as a central location for system configuration and remote maintenance as per VDE 0834 - Intel Xeon 3220 2,4GHz or similar - 2 GB RAM, 1 x 160GB HDD - 1 x DVD hard drive, 2 x Gbit LAN Ethernet RJ45 - 1 x serial connection RS232 and 2 x USBV2.0 - 1 x PCI or 1 x PICe socket, support for SUSE Linux enterprise Server from V10.1 - The system working on any Virtual Plateform (VM Ware / Virtual Box / Hyper V etc) is striclty not allowed Software- Event Database Software Software pack installed on the system server for automatically logging all events in the entire communications system, such as, e.g., calls, presence markings,call acknowledgements, reminders. All the report should be able to generate on real time basis without any delay. The Licesce should be for life time without any additional cost in future.

8 core CAT6 UTP cable with necessary connectors

25 mm PVC medium grade ISI marked conduit

Power Supply SMPS 24 V / 7Amps

SITC of Intelligent Addressable Fully Redundant Fire alarm detection System:-SITC of 32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 1 loop with battery back up to 24 hours, The control panel, batteries, battery charger etc, shall be Vds approved and as per EN-54 standard. The panel shall consisting with minimum 240 character LCD display. Panel should be able to record at least 10000 events history. Each loop should be capable to have at least 250 elements / devices out of which min. 200 nos. shall be detectors. The Panel Shall have on board TCP/IP Lan port to facilate remote operation of the panel. The system should be Vds approved It is possible to Commissioning the System through LAN Network.

Supply, Installation, Testing & Commissioning of Intelligent Addressable type multisensor detector with base, with 8 bit Microprocessor inbuilt, for use as heat (Fixed + Rate of Rise or individual ) or smoke or combined both with automatic electronic addressing, microprocessor type and must have integrated short circuit isolator (in case short circuit isolator is not inbuilt, the price of this item shall be inclusive of an independent short-circuit isolator along with each detector). The detector shall have IP 44 protection category & ambient temperature -20⁰C to + 60⁰C, the base shall have no electronics only dry contact terminals. The quoted item shall completely comply to the technical specification. Shall be Vds approved according to EN 54-5, 54-7, 54-17, 54-29

SITC Addressable manual call point which is used for manually trigger a fire alarm suitable for interconnecting to the loop technology directly. This must have inbuilt short circuit isolator,. The ambient temperature range shall be -20⁰C to +50⁰C. The quoted item shall completely comply to the technical specification. Shall be Vds approved

SITC Addressable Loop Powered multi tone sounder with integrated short circuit isolator (in case short circuit isolator is not inbuilt, the price of this item shall be inclusive of an independent short-circuit isolator along with each loop powered sounder) & having operating temperature -10⁰C to + 55⁰C shall be Vds approved

Supply, Installation, Testing & Commissioning of Vds approved Analogue Addressable Input / Output module with IP66 casing containing 2 inputs for monitored quering of potential free contacts amd one Relay Output with in-built short citcuit isolator (in case short circuit isolator is not inbuilt, the price of this item shall be inclusive of an independent short-circuit isolator along with each monitor module), it must be VdS approved and as per EN-54 standard. The ambient temperature range shall be -20⁰C to +60⁰C.The quoted item shall completely comply to the technical specification

Response Indicator

Supply and laying of 2C x 1 Sq.mm twisted multistranded FRLS shielded Armoured cable for FAS System

Junction Boxes, clamps, conduits and all necessary accessories to complete the installation

Supply, Installation, Testing & Commissioning of Medical Gas piping inside SICU, Post OP & Recovery unit as per tender technical specification & this BOQ

Air Cooled Direct Expansion Type Condensing Unit The unit shall be complete with hermetically sealed Scroll type compressors with constant speed designed for operation at ambient temperature of 53 Deg C. Condenser shall be air cooled type with copper tubes and extended aluminum fins with anticorrosive coating. Condenser fan shall be of BLDC motors are more efficient than conventional ac motors used by others BLDC motors 40% motor efficient at lower speeds about 20 more efficient at higher speed. Unit shall be design to deliver rated cooling capacity at 53 Deg. C ambient temperature. Refrigerant shall be CFC Free, either R-410a . Outdoor unit shall not be more than 50meter away from the indoor unit.& vertical height 30 meter 8.5 TR DX Condensing Unit for DX AHU.

AHU kit & Communication kit

Remote Controller With Each AHU

Supply, installation, testing and commissioning of refrigerant piping

Drain Piping - 50 NB uPVC, insulated with 9 mm thick elastomeric closed cell Nitrile Rubber insulation material, joints to be sealed with adhesive tape.

Metal Ducting & Accessories-For HVAC System Supply, Installation testing & commissioning of Factory fabricated GI Sheet metal duct as per SMACNA standard along with all accessories and fittings. All Ductwork shall be with site fabricated.(Tentative Considered QTY) :- 24 G

Metal Ducting & Accessories-For HVAC System Supply, Installation testing & commissioning of Factory fabricated GI Sheet metal duct as per SMACNA standard along with all accessories and fittings. All Ductwork shall be with site fabricated.(Tentative Considered QTY) :- 22 G

Metal Ducting & Accessories-For HVAC System Supply, Installation testing & commissioning of Factory fabricated GI Sheet metal duct as per SMACNA standard along with all accessories and fittings. All Ductwork shall be with site fabricated.(Tentative Considered QTY) :- 20 G

Supply & installation of thermal insulation & Acoustic insulation of duct with mechanical protection as per technical specification. Thermal Insulation : Supply, Installation, Testing & Commissioning of 19 mm thick Nitrile rubber (class” Plain sheet) closed cell insulation with aluminium foil for supply & Return air duct after applying Suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. Density with 40 kg/m3.

Acoustic insulation : Supply, Installation, Testing & Commissioning of 10 mm thick Acoustic Insulation Open cell Class 1 insulation for supply air duct after applying Suitable adhesive for nitrile rubber. The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. Density with 180 kg/m3

Supplying Installation ,Testing & Commissioning of powder coated extruded Aluminium Supply Air Square Diffuser with Aluminium volume control dampers as per specifications. 600X600 Square Diffuser

Supplying Installation, Testing & Commissioning of powder coated extruded Aluminium Return Air Square Diffuser without Aluminium volume control dampers as per specifications.

Supply, installation, testing and commissioning of 18G GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Motorized Fire Damper Fire dampers

Motorized Fire Damper Actuators

Steel Structure fabrication, erection, painting for Support (Inclusive Supply of Primer and Paint) for 11 TR DX Condensing Outdoor UNIT

Canvas connection between DUCT & + AHU UNIT & duct

Isolation rooms :Supply Installation Testing & Commissioning Of 5.5 TR Dx-Type Outdoor Units For AHU

Supply Installation Testing & Commissioning Of 1375 CFM AHU With Dx Coil unit & Hepa Filter.

Supply Installation Testing & Commissioning Of Cabinet Type Inline Fans of 1850 CFM For Isolation Room

Supply installation testing & Commissioning of Aluminium Ducting of Following Gauges 24 Gauge Ducting

Supply installation testing & Commissioning of Aluminium Ducting of Following Gauges 22 Gauge Ducting

Supply installation testing & Commissioning of GI Ducting of Following Gauges 24 Gauge Ducting

Supply installation testing & Commissioning of GI Ducting of Following Gauges 22 Gauge Ducting

Supply installation testing & Commissioning of Thermal Insulation of 13mm Thick Nitrile Rubber

Supply installation testing & Commissioning of Acoustic Insulation of 15mm Thick Nitrile Rubber

Grills & Dampers Supply Installation Testing & Commissioning Of Automatic Fire Dampers

Supply Installation Testing & Commissioning Of Duct Dampers

Supply Installation Testing & Commissioning Of Actuator

Supply Installation Testing & Commissioning Of Supply Diffuser With Dampers

Supply Installation Testing & Commissioning Of Aluminium Powder Coated Return Air Grill With Dampers

Copper Piping Between AHU & DX Units

Communication Cable Between Indoor & Outdoor Units

32mm Dia. PVC Pipe For Drain

Table Top MS Stand For Outdoor Units & Exhaust Units

Meghnalic Gauges For Isolation Rooms

Supply Installation testing & Commissioning of 1KW Heaters For Isolation Rooms AHU

Supply & installation of 12 CHANNEL ECG MACHINE as per tender technical specification & this BOQ

Supply & installation of Defibrillator as per tender technical specification & this BOQ

Supply & installation of 7 Para Patient Monitor as per tender technical specification & this BOQ

Supply & installation of 16 Bed Central Nursing Monitoring Station as per tender technical specification & this BOQ

Supply & installation of Syringe Pump as per tender technical specification & this BOQ

Supply & installation of Convective patient warming system as per tender technical specification & this BOQ

Supply & installation of ICU Ventilator as per tender technical specification & this BOQ

Supply & installation of Transport Ventilator as per tender technical specification & this BOQ

Supply & installation of Hyper hypothermia unit as per tender technical specification & this BOQ

Supply & installation of Hemodynamic (Cardiac Output) Monitor as per tender technical specification & this BOQ

Supply & installation of Motorised Hospital Bed as per tender technical specification & this BOQ

Supply & installation of Bed cubicle with Curtains netted as per tender technical specification & this BOQ

Supply & installation of Ceiling Mounted IV Hanger System as per tender technical specification & this BOQ

Supply & installation of Quadra Color Dustbin Set OF 4 as per tender technical specification & this BOQ

Supply & installation of Crash Cart Trolley Stainless Steel as per tender technical specification & this BOQ

Supply & installation of Medicine Trolley with Six Drawer as per tender technical specification & this BOQ

Supply & installation of Wheelchair with Handbrake as per tender technical specification & this BOQ

Supply & installation of Food Table Over Bed Table ABS as per tender technical specification & this BOQ

Supply & installation of Bed Side Cabinet ABS as per tender technical specification & this BOQ

Supply & installation of Foot Step ABS Top Table as per tender technical specification & this BOQ

Civil Work

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, complete.

Removing Water Closet Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side etc. complete.

Removing Urinal Pans or wash hand basin with frame including disconnecting the sanitory and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound and finishing the top layer with 20 mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/ per bag of cement etc. complete.

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture “aerolite” make or equivalent of size 595mm x 595mm having 15 mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46 part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main “T” runner of size 42 mmx14 mm between main 'T' 600 mm center-tocenter and secondary cross “T” of size 33x14x0.43 mm thick of length 600 mm long spaced inter-locked at middle of the first crossed “T” in each panel to form grid of 1200 mmx600 mm resting on periphery wall Profile wall section 19mm (7+7) x 19 mm x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors etc., wherever required. Main “T” runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6 mm dia and 50 mm long dash fastener, 4 mm dia. G.I. adjustable rods with powder-coated/ good quality G.I. level adjustment clips of 35x35x0.8 mm spaced @1200, center-to-center along main “T” all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge.

Supply, fixing and installation of 4 mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coats using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles)

Providing and fixing Oval Type Under Counter Wash Hand Basin of 16 inch x 22 inch size and of special colour shade having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, including Chromium Plated coupling Bottle-Trap using CERA company or equivalent Oval Type Wash basin Model No. 3448 as per detailed drawing or as directed by Engineer-In-Charge etc. Complete.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100 mm diameter G.I. plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete.

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing fibre glass reinforced polyster door shutter 30 mm. thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete.

Lowering down the debris obtained from breaking and removing the cement plaster/ burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and fixing C.P. Angular stop cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

Providing and fixing 10 cm C.I. Nahani Trap including C.I. grating ,bend and piece of C.I. pipe upto the outside face of the wall complete.

Providing and fixing health faucet jet spray of kohter or equvivalent make of approved quality including necessary socket/ union etc. complete as direcetd

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Testing Charges

Vitrified Tiles with Matt Finish for Flooring.

Basic Test of Cement: Carrying out Standard Consistancy Fineness, Specific Gravity, Setting Time (Initial & Final), Compressive Strength, Soundness Test

MORTOR - Compressive Strength.( Set of 3 Cubes)

Bricks - Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

ALUMINIUM SECTION - Thickness, Mass Per Running meter,

FLOORING TILES -

Flexural test ( Set of 6 Tiles), Water Absorption ( Set of 6 Tiles).Resistance to wear ( Set of 6 Tiles).

Flooring of Natural Stone (Kota,Marble, Granite,Tandur.etc.) Water absorption, Specific gravity

Harsh Constructions Pvt Ltd

K H CONSTRUCTION