Provn of LPG store room 10 x 12 with mastic flooring at GC Mess and Spl Rep to Bldg No T-72 FE and IED Model Room and Bldg No 10 at GC Toilet at OTA Gaya

Amount

Excavating in trenches, n exc 1.5M wide and n exc 1.5M depth; for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5M in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge

All as per item no 1 above but exc 1.5M depth but n.exc 3.0 m depth complete all as specified and as directed by Engr-in-Charge

M & L Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in soft/loose soil

M & L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge

M & L Brick work with flyash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as spfd

M & L RCC M-25 Design Mix (20mm graded stone aggregate)Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete as directed by EIC

M & L RCC M-25 Design Mix (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintel etc.

M & L RCC M-25 Design Mix (20mm graded stone aggregate) in Columns, pillars, piers, posts as directed by EIC

M & L RCC M-25 Design Mix (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the like as directed by EIC

M & L Damp proof course to horizontal incl all form works with 25 mm thick PCC 1:2:4 type B-0, mixed with water proofing compound,smooth finish surface. Note : WPC shall be measured and paid separately.

M & L Liquid waterproofing compound complete. Make : Sika Latex Powder

M & L Formwork to rough finished flat surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beam etc complete as spfd and directed by Engr-in-charge

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work;vertical or to batter

M & L Formwork to sides of pillars,posts, struts, piers, columns and stanchions all as specified and directed

M & L Form work to soffits of suspended slabs such as roof slabs, landings and similar work; not excedding 200mm thick (horizonal or sloping) fair finished surface.

M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide.

M & L Mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

M & L Mild steel TMT bars 6 to 8 mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or or securing clips

M & L Mild steel TMT bars 5mm dia and over upto 10 mm dia, cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia as in stirrups

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement using water proofing compound.as directed by EIC. Note : WPC shall be measured and paid separately.

M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement.

M & L Hard core of broken bricks of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface.

M & L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M & L 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) and finishing cement concrete surface even and smooth with using extra cement complete.

M & L Rendering 5 mm thick in ceilings on concrete surfaces in cement mortar 1:3, finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L Three coats of white wash on plastered surfaces including preparation of new plastered surfaces complete all as specified and as directed.

M & L Three coats of white wash on plastered surfaces including preparation of new plastered surfaces as in ceiling complete all as specified and as directed.

M & L Two coats of cement based paint including preparation of old/newly plastered surfaces of walls/floors/roof/chajja complete all as specified and directed by Engr-in-Charge

M&L Providing water proofing treatment over cleaned roof surfaces with super thermolay APP modified water froofing membrane comprssing of following for non-approachable roof: (i) Cleaning sweeping and washing and down with water to remove all dust etc from plastered roof surfaces/wall etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermolay APP modified water proofing membrane with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv) Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction ( Note : application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification)

M & L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate as in plinth protection and finishing surfaces even and smooth without using extra cement.

M & L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’

M & L 5.5 mm thick sheet glass tinted single reflective quality and glazing with oil putty or fixing rubber gasket with aluminium frame exc 0.5 sqm in each pane

S & F Galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges

M & L RCC M-25 Design Mix (20mm graded stone aggregate) as in Chajjas

M&L10 mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound using as per manufacturer's instrutions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M & L Sand filling under floors for cushioning complete all as specified and as directed

M & L Aluminium dividing strips, 38mm x 1.5mm thick, inserted in position, conform to design (n.exc 1.20 mtr x 1.20 mtr in panels) complete all as directed.

S & F Mastic flooring 25 to 30 mm thick with bitumen VG-10 and levelled including finishing surfaces even and smooth all as per manufacturer instruction complete.

M & L Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M & L PCC type B-1 1:2:4 using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs complete as directed.

M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars; barred iron doors; ladders, railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L Extra over framed work portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc

M & L Applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces

S & F Mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above GL

M&L PCC 1:2: 4 type B1 (using 20mm graded stone aggaregate) as in 25 mm thick for levelling of surface.

S & F Vitrified tiles light shade 8-10 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed 15 mm thick in CM 1:6 complete.

All as per item No 49 above but in vertical surfaces over 10 mm thick backing coat in CM 1 : 4 complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc, except dressed stone work and precast concrete article

M & L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4.

M & L Brick work with sub class 'B' bricks, in half brick thick wall, straight or curved on plan exc 6m mean radius built in CM 1:4.

M & L Two coats of cement based paint incl complete removal of existing treatment on wall surfaces.

M & L Two coats of acrylic distemper on wall surfaces over a coat of primer including preparation of newly plastered surfaces

M & L Applying a coat of 0.50 mm thick wall putty (Birla white / JK ) on wall surfaces including complete removal of existing treatment or preparation of new palstered surfaces.

M & L Two coats of acrylic distemper including preparation of old wall surfaces complete all as specified and directed

S&F Aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and locking arraangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F Stainless steel butt hinges, medium weight, 100 mm size complete

S & F Stainless steel handles, D type, anodised 150 mm long complete.

S & F Stainless steel tower bolts 200 mm long complete.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness complete all as specified and directed.

M&L Suspended false ceiling system using chicago metallic (E Grid) exposed suspended system, grid section size 600 mm x 600 mm, comprising of GI powder coated Main Runner of dimensions 39 mm x 24 mm x 0.8 mm thick (Thickness comprising of GI/ 0.4 + PPPCGS/0.3mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2 mm x 22.2 mm x 0.65 mm thick (Thickness comprising of GI /0.4 + PPPCGS/0.3 mm & weight of Tee of 0.195 kg for 600 mm length), and Wall Angle of dimensions 22.2 mm x 22.2 mm x 3050 x 0.65 mm thick (Thickness comprisingof GI / 0.35 + PPPCGS /0.3 mm & weight of angle 0.70 kg for 3050 mm length), with and including 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified. Make : Everset & Armstorng

M&L Providing precast cement concrete 1 : 2 : 4, type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels set in cement mortar 1:4 complete.

S&F Mild steel rolled section Fe 410 W(Gde E - 250 quality) as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates.

Cuttting holes exc 150 sq cm but not exc 400 sq cm into or through brick walls built in CM or cement lime mortar and stone walls built in lime mortar and making good in PCC 1:2:4 type B1 as complete.

S & F Chicken wire mesh made out of low carbon wire 0.36mm thick, annealed, mesh size (dist between the faces of hexagon) 13mm fixed with nails complete all as spd and as directed.

Dismantling of asbestos cement (corrugated or semi corrugated) sheets as in roof coverings complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedas spd and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/Valley/Gutter/Ridges/cladding to wall, fixed with self tapping screws complete.

Taking down chowkhat or frame exc 1.5 sqm but not exc 4.00 sqm (without taking off shutter) from the frame

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing from the site.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing from the site.

M & L Providing 25 mm thick PCC type B-0, 1 : 2 : 4, (using 12.50 mm graded aggregate) as in flooring complete with using WPC. WPC shall be measured and paid separately.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M & L Rendering 15mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete.

M & L Rendering 15mm thick in two layers (10 mm thick & 5 mm thick) on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC. Note :- WPC measured and paid separatly

M & L Rendering 15 mm thick on fair faces on concrete surfaces (Roof slab) in CM 1 :4 with WPC as per manufacturer insruction complete. (WPC will be measured and paid separately)

M & L Rendering 10mm thick on ceiling surfaces in CM 1:3 finished even and fair without using extra cement.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with finishing with cement mortar 1:3

M & L Cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. and application Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm complete.

S & F APP based non polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application (including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification) including taking down existing APP membrane and removing upto 500 mtr away from working site complete. Make : M/S STP (Super thermolay)/IWL/SIKA.

M & L Applying two coat of bituminous anti-corrosive multi-purpose Aluminium Coating (SuperSilverShield) @ 0.15 kg/sqm per coat over bitumen layers as per manufacturer instruction

M & L 0.5 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth on walls/ceilings.

M & L Preparation of old plastered surfaces and applying two coat of acrylic distemper in ceilings complete all as specified and as directed.

Supply only stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete

Supply only 4 mm thick Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises.

M & L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:4 complete.

M & L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete.

Providing 75 mm thick,cement concrete1:3:6 type C-0 (using 12.50mm graded crushed stone agg) as in plinth protection and simillar works finished even and smooth without using extra cement. Note: Joints 12 mm wide to the full depth of PCC shall be provided at every 3 m and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provn shall be deemed to be included in the quoted rate

M & L Providing precast cement concrete type B-1 1:2:4 as in manhole covers including setting in cement mortar 1:4

S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. Make : Hindware/Jaguar/Parryware

S & F 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. Make : Hindware/Jaguar/Parryware

S & F in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. Make : Hindware/Jaguar/Parryware

Supply & fix in repair brass chromium plated wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make-Parryware/ Prayag/Hindware)

S &F in repair chromium plated Shower rose 15 mm size, 125mm long with 300 mm arms (Make : Jaguar/Parryware/Hindware)

S&F Brass chromium plated health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. (Make : Jaguar/Parryware/Hindware)

S & F 600 x 450mm bevelled edge mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. (Make : Saint Gobain/ModiFloat)

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make : Jaguar/Parryware/Hindware)

S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make : Jaguar/Parryware/Hindware)

S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. (Make : Jaguar/Parryware/Hindware)

Taking down and refixing of 15 mm dia Bib taps/Stop valves/Angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.

S & F CP rubber hose 15mm size with brass nuts of length 450 mm all as specified and as directed. (Make : Jaguar/Parryware/Hindware)

S & F Stack clamps out of flat iron, round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete.

S & F in repairs CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

S & F in repairs CPVC pipes 32 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule

Disconnecting existing water storage tank of capacity from 500ltr & not exc 1000ltr, setting aside (for lowering if required) for repairs, cleaning etc and re-fixing in position.

S&F 1000 Lrts capacity white rotational Moulded ploythene water storage tank (cylinderical vertical with closed top) multilayered hoisted and fixed in position incl dismantling of existing tanks.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place. Make- Reliance,finolex,Supreme, Kisan, Prince all as specified and as directed.

S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed. Make-Reliance,finolex,Supreme, Kisan, Prince

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls. Make- Reliance, finolex,Supreme, Kisan, Prince all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes. Make- Reliance, finolex,Supreme, Kisan, Prince all as specified and as directed.

PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.

M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls of 75 mm bore of pipe etc complete all as specified and directed

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide on plan in soft/loose soil and getting out complete all as spd and directed by EIC

M & L 15- 18 mm Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like including 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M & L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and mirror polishing incl 15 mm thick screed bed in CM 1:4 comlpete.

M & L Gun-metal, globe or gate valves of 25 mm size with iron wheel head, screwed both ends for iron pipe and fixedor brass ferrule

S & F Vitreous china wash hand basin under counter size 22 x 16 inches oval shape incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipe and CP waste coupling 32 mm dia complete fixed. (Make-Parryware/Hindware/Jaquar)

S & F Full size 6 mm thick bevelled edge mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws on walls and cup washers complete. (Make : Saint Gobain/ModiFloat)

Supply & fix in repair brass chromium plated single lever mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete Engr-in-charge. (Make-Parryware/ Prayag/Hindware)

M&L Flame proof point wiring with FRLS multi-stranded copper conductor single core PVC insulated fire resistant cable 1.5 Sqmm size sheathed cable including 25 mm size steel conduit concealed flame proof wiring with all flame proof steel conduit fitting and accessories i.e junction box, inner/outer corners and inner/outer bends, tees etc. with continuous 1.5 sqmm PVC insulated fire resistant copper earth cable (green color) FRLS conneted to common earth including cutting chases to wall making good the disturb suface to match with the exisitng specification complete all as specified and directed by Engr - in - charge. (a) One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way

S &F switch flame proof - weather proof rotary type with termination box in LM6, 16 A, single pole 250V ON/OFF complete all as specified and directed.

S &F flame proof - weather proof switch socket & plug combined in LM6 cable with termination box in LM6, 16 Amp, 250 V, 2P+ earth complete all as specified and directed.

Supply & fix LED light fitting 1x40 watt flame proof,weather proof CMRI certified recommended for Gas/Vapor group of IIA & IIIB Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and directed by Engr -in-charge.

S&F Flame proof - weather proof Exhaust Fans AC single phase 300 mm sweep with louver, Energy saving fans, 230 v, 50 HZ Completed all as specified and directed.

S&F Flame proof - weather proof sheet metal enclousure MCB DB single pole and neutral 240 Volt 6 way with Aluminum die cast alloy LM6 construction of Gas Gr IIA, IIB certified by with ISI marked all as specified and directed by Engr-in-charge.

S&F RCBOs for earth leakage, overload & short - circuit protection RCBO double pole 30 mA, 32 Amp capacity complete complete all as specified and directed.

S&F MCB SP upto 40 Amps 240 volts complete all as specified and directed. Make-Havells/legrand/ L&T

M&L Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively)

Spply, Laying and testing of cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16sqmm 2 core complete all as specified & directed by Engr-in-charge. Make-Polycab/Havells/KEI

M&L Bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L Natural local river sand for cable protection.

M&L GI tubing 40 mm dia light grade with all fittings laid in trenches/making GI bracket of security lights/provn for ceiling fan ponit including bending of suitable size/support of UG cable as required at site as directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfases of walls, floors, etc.

M&L Point wiring complete with PVC insulated unsheathed FR multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ Plaza

One light/fan/bell point controlled by one No piano type switch 5 AMPS single pole one way

One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board.

M&L Switch socket comination multipurpose 2 in 1,5 and 15 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

S&F 3 pin socket outlet point 15 Amps independent, with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed by Engr-in-charge.

S &F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed. Make: Anchor/ Havells/ SSK

M&L Socket outlet 3/5 pin 5Amp flush type complete all as specified and directed. Make: Anchor/ Havells/ SSK

M & L Switch Socket combination 2 in 1 , 5 pin, 6 Amps flush type.

M&L Switch socket combination multipurpose 2 in 1,5 and 15 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

Supply & Fixing LED tube light complete fitting 1X20 Watt, 4 ft, 220V, AC decorative box type with high quality materials and design, extruded aluminum housing enhance safety, high quality PC diffuser, reliable and robust housing structure, efficacy is 125 Lumen/watt including connecting up with three core flexible copper conductor cable of suitable size upto ceiling rose complete all as specified & directed by Engr-in-charge.Product code- CCS-100-20-65-HL2-DP-NWH of Crompton Greaves or equivlent of Havells,Bajaj,HPL.

M&L in replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 100Amp capacity and 04 Nos Out going MCB SPN complete all as specified and directed. Havells/ L&T/Legrand NOTE:- MCCB & MCB's are measured and paid in separate items and same make.

S&F in replacement of sheet metal enclousure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type complete all as specified and directed. Make : Legrand/ Havells/L&T

S&F in replacement of MCB SPN capacity 40 to 60 Amps DP 240 complete all as specified and directed. Make : Legrand/ Havells/ L&T

S&F in replacement of MCCB 4 pole, 100 Amps with breaking capacity 25 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

S&F LED Panel 36 watt LED (2X2 ft), for square shaped slim width of the tiles makes it seamlessly blend in with the ceiling space, with geometric and aligned designs, the tile can be arranged in a symmetric and abstract way to make the ceiling a piece of art of complete fitting ,including LED panel in white , 230 volt energy saving , enviromental friendly , long life, IP-65luminaire with complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Product code Vector-VII, LCTLRF7-36-CDL of Crompton Greaves or Equivlent of Havells/Bajaj/HPL

Taking down carefully ceiling fan 1200/1400 mm sweep from the exisiting potsition complete with blades from brackets etc and servicing the same properly by cleaning,greasing,oiling, replacing the unserviceable minor spear parts etc if any, and reassembling and refixing in the same position panting same with one cot of synthetic enamil paint of existing colour using brush and rewriting of MES No complete all as directed.

M&L Ceiling rose , 3 terminal polycarbonate complete all as specified and directed. Make: Anchor/ Havells/ Philips

M&L in replacement of sub main wiring with two single core pvc insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 2.5 sqmm and incl drawn through and including non metalic rigid pvc conduit and couduit accesssories of 25 mm external dia and conduit accessories of ISI marks medium grade including 1.5 sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire : polycab/Havells/ Plaza . Note:- One run of conduit two run of 6 sq mm copper conductor & one run of 4 sq mm copper conductor is measured as one unit.

S & F Building security light fitting 1 x 30W LED new generation energy saving & environmental friendly long life LED building security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35sqmm 4 core Make-Polycab/Havells/KEI

M/s Vinay Kumar

MS HARI MOHAN GUPTA