Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC C 56 6 ANAND VIHAR COMMERCIAL COMPLEX MAHOLI ROAD MATHURA UP PIN 281004 | MATHURA | UTTAR PRADESH | 281004 | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹24.3 L+₹15,874.40 (0.66%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹27.6 L
EMD Value
₹55,300
Closing Date
28 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
SPECIAL REPAIR TO NOOR KOT AND NAINA KOT (GUEST HOUSE) UNDER GE (EAST) MATHURA
2023_MES_621280_1
8200-1397/E8
Open Tender
Civil Works
Item Rate
150 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE EAST MATHURA
₹55,300
14 Dec 2023
30 Sept 2023
30 Oct 2023
30 Sept 2023
28 Oct 2023
14 Oct 2023
30 Sept 2023 - 21 Oct 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
M&L for coloured joint free Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
M&L for Vitrified Ceramic double charged light shade coloured tiles 10 mm thick (square/ rectagular) polished, area of each tiles exc 18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
M&L for Vitrified Ceramic light shade coloured tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in cement motar 1:3 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface of size 1200x600x8-10mm thick set using expoxy adhesive as per manufacture's specification and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.
Demolition of stone slabs of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick black granite (of any type) work (table rubbed and polished) single piece in steps Jabms pillar, window cills, cooking platform and like laid over and including 15mm thick screed bed in cement mortar 1:6 and pointing in white cement (1:2) using marble, dust with admixture of pigment to match the shade of granite complete all as specified and as directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 15mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L kota stone slab 20-25 mm thick (in single piece) in riser of steps, skirting, dado and pillar laid over and including 10 mm tick rendering in cement mortar 1:3 and jointed with gray cement and pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for Brick work using fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with fly ash brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on brick walls and concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:3 finished even & smooth (without using extra cement) complete all as specified and as directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. Note : Payment for providing grooves shall be paid separately under relevant item(s) of this schedule.
M&L for Forming groove of uniform size 5mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and including providing brass strip of size 5mm x 15mm complete all as specified and as directed.
M&L for 15mm thick rendering in two layer on stone masonry surfaces or surfaces on other than fair face of brick work of walls consisting of 1st layer of 10mm thick plaster in cement mortar 1:4 and 2nd layer (setting coat or top layer) of 5mm thick plaster in cement mortar 1:4 mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufactures instructions, finished even & fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.
M&L for preparation of new surface of ceiling and applying two coats of 100% Premium plastic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior ceiling paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of interior primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for complete removal of old treatment of ceiling and applying two coats of 100% Premium plastic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior ceiling paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of interior primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for preparation of new surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior wall paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of interior wall primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for complete removal of old treatment of wall and applying Two coats of 100% Premium plastic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior wall paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of interior wall primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for preparation of new surface of wall and applying two coats of 100% Premium plastic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior wall paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of exterior wall primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for complete removal of old treatment of wall and applying two coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including a coat of exterior primer applied @ 0.90 litre/10 sqm applied using roller to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamal paint over and including a coat of red oxide primer complete as specified and as directed.
Dismantling of old brick/PCC tiles and existing roof treatment of any thickness and clean the RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles complete all as specified and as directed.
M&L for 40 mm average thick cement concret type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as in leveling course in floor/padding finished the surface even & fair without using extra cement compete all as specified and as directed.
M&L for bitumen felt water proofing treatment using APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.00 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm) laid over and including cold bitumen primer applied at the rate of 0.30 kg/sqm by torched application complete all as specified and as directed.
M&L for cement concrete tiles 25cm x 25cm x 22mm thick, with greey cement and pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and as directed.
Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.
Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.
S&F in repair 25 mm dia stainless steel tubular drapery rod cut to size and fixed in position including fixing brackets stop roller end caps etc complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F first class hard wood plain, solid straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed to chowkats and frames complete all as specified and as directed.
S&F 35 mm thick factory made first class hard wood Glazed and skeleton door shutter, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.
S&F 35 mm thick factory made, Flush shutters, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneers with lipping/frame to match on both sides complete all as specified and as directed.
S&F Stainless steel superior quality, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 300 mm long of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.
S&F extruded stainless steel superior quality handles of size 200mm, fabricated type, anodised complete all as specified and as directed.
S&F Stainless steel superior quality barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed.
S&F stainless steel Butt hinges 100mm fixed complete all as specified and as directed.
M&L for preparation of new wood and wood base surface and applying three coats of French polish on new wooden surface of any description width or girth including cleaning, filling to achieve smooth finish complete all as specified and as directed.
M&L for preparation of old surface and applying one coat of French polish on old wooden surface of any description width or girth including cleaning, filling to achieve finish complete all as specified and as directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete as specified and as directed.
S&F Floor door stopper of brass body 190mm long, and tongue with hard drawn steel spring hard overall length of cover plate 140mm complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.
Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.
Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.
Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.
Supplying & fixing steel tubing ,galvanised, medium grade 25 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.
S&F in repair bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia pipes or union complete all as specified and as directed. Make : Jaquar Cat No FUS-29037 or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both ends for 15 mm bore dia pipes or union complete all as specified and as directed. Make : Jaquar Cat No FUS-29053 or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.
S&F in repairs cast copper alloy chromium plated wash basin mixer 15 mm bore with connector complete all as specified and as directed. Make : Jaquar Cat No FUS-2905 NB or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair Salt-glazed stoneware gully traps of size 150mmx 100mm, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and as directed.
S&F in repairs cast copper alloy chromium plated sink mixer 15 mm bore complete all as specified and as directed. Make : Jaquar Cat No FUS-29165 or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repairs sinks with double bowl made of stainless steel sheet 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1040mm x 545mm complete as specified and as directed.
S&F in repair white colour european type wall mounted water closet with mounted flushing cistern to votex technology of model CORA VORTEX complete all specified and as directed. Make : Hindware Catlogue No - 92569 or equivalent make as specified in Appx 'B' to Particular Specifications.
S&f in repair cast copper alloy chromium plated two way bib cock superior quality with wall flange fixed to 15 mm bore dia iron pipe complete all as specified and as directed. Make : Jaquar Cat No OPP-CHR-5041N or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair Hand jet health faucet ABS body having 8mm dia & 1.2 mtr long SS flexible tube and wall hook with all connected fittings for 15mm bore pipe or union complete all as specified and as directed. Make : Jaquar Cat No ALD-CHR-593N or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair Toilet paper holders of stainless steel chromium plated fixed to walls with PVC gutties and SS screws complete all as specified and as directed. Make : Jaquar Cat No AKP-35753P or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repairs vitreous china wash hand basin, counter top of size 750mmx380mmx130mm including brackets, brass, chromium plated waste coupling, brass bottle trap complete all as specified and as directed. Make : CERA Cat NO - S2020160 or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stainless steel bracket guard and railing 600mm long complete all as specified and directed. Make : Jaquar Cat NO CAN-1171N or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair corner glass shelf of 225 x 225mm size with stainless steel bracket fixed to wall complete all as specified and as directed. Make : Jaquar Cat NO CAN-SSF-1173 or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair stainless steel chromium plated tubular Towel Rail 600 mm long including brackets fixed to wall complete all as specified and directed. Make : Jaquar Cat NO AKP-357211 PS or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair stainless steel chromium plated towel Rack 600 mm long with lower Hangers complete all as specified and as directed. Make : Jaquar Cat NO AKP-CHR-35781PS or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair stainless steel chromium plated soap dish fixed to wall complete all as specified and as directed. Make : Jaquar Cat NO AKP-35731P or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repairs stainless steel towel Ring fixed with and including Chromium plated brass screws to wooden/plastic cleats complete all as specified and as directed. Make : Jaquar Cat NO AKP-35721P or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.
S&F Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 25 mm bore dia complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) including removal of debris outside of MOD land complete all as specified and as directed.
M&L for 50 mm thick cement concrete type C-1 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth (using extra cement) compete all as specified and as directed.
S&F 18 mm thick WPC board in cupboard shutter/shelves/kitchen cabinet decorative laminated on one side and other side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt complete all as specified and as directed.
S&F 18 mm thick WPC board in cupboard shutter/kitchen cabinet/shelves with both side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt complete all as specified and as directed.
S&F 12 mm thick WPC board in cupboard shutter/kitchen cabinet with both sides balancing white fixed with stainless steel drilling screws/Anchoring bolt etc complete all as specified and as directed.
S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed.
S&F ball bearing runners 450mm Telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and as directed.
S&F stainless steel handles, cast type polished bright of 100 mm size for kitchen cabinet shutters complete all as specified and as directed.
S&F stainless steel 304 grade kitchen modular basket for storage of plates, cups, grains basket, glass cutlery, bottles of required size complete all as specified and as directed.
S & F Magnatic catcher of size 20mm x 50mm suitable for cup board/kitchen cabinet shutter complete all as specified and as directed.
M&L 25 mm average thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate as in levelling course for flooring complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 1000 liters capacity having monkey protection cover hoisted and fixed in position on roof complete all as specified and as directed.
S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 500 liters capacity having monkey protection cover hoisted and fixed in position on roof complete all as specified and as directed.
S&F ball valves high pressure of PTMT with epoxy coated brass rod polythene float and fly nut & high density plastic ball screwed for 20mm bore dia iron pipe complete all as specified and as directed.
S&F 20mm bore GI nipple suitable for HDPE water tank complete all as specified and as directed.
S&F Tumbler holder of brass chrome finish complete all as specified and as directed. Make: Jaguar CA No. CAN-CHR-1141N. or equivalent make as specified in Appx 'B' to Particular Specifications.
M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching, roof kerb etc complete all as specified and as directed.
S&F in repairs bath room cabinet with mirror and PVC shelves of size 600mm x 450mm complete all as specified and as directed.
Demolition of reinforced cement concrete as in roofs, floor (other than ground floors) beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) removing debris outside Mod land complete all as specified and as directed.
M&L for renforced cement concrete 1:1½:3 type A-1 (using 20 mm graded stone aggregates) as in slab supported on walls, chajjas and somilar suspended work including removing rubbish off out of MoD land complete all as specified and directed.
M&L for pre cast reinforced cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in cover slab for manholes, chajja, shelves and similar articles including form work etc complete all as specified and as directed. Note : Reinforcement shall be measured and paid separtely under relevant item(s) of this BOQ.
M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Form work for flat surface of chajjas, chullah hoods, troughs and similar items including edges for rough finished surface of concrete complete all as specified.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and as directed.
M&L for treatment of soil under existing floors using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632, emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per square meter of the perimeter wall using chemical chlorophyriphos or lindane emulsifiable concentrate 20EC conforming to IS:8944 or IS 632 complete all as specified and as directed.
M&L for Providing and fixing factory made UPVC rose wood colour sliding window three track made of extruded profiles with all thickness of 2.3mm(+/- 0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters)(45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware. EPDM gasket, 1.2 +/- 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : (Touch lock of zing alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and required accessories). (a) Area exc 1.00 sqm but n exc 2.00 sqm each Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for paymenbt purpose. (ii) The rate quoated by the contractor shall include making good surface after fixing the window.
S&F 5.50mm thick, Sheet glass ordinary quality and glazing with rubber/putty/wooden beading in square n exc 0.5 sqm in each pane complete all as specified and as directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S&F in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified.
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F in repair 110mm bore PVC (SWR) bends any radius complete as specified and as directed.
S&F in repair 75mm bore PVC (SWR) bends any radius complete as specified and as directed.
S&F 110 mm bore PVC (SWR), vent cowl complete as specified and as directed.
S&F PVC (SWR) floor trap plain 75mm dia of outlet with grating including jointing with solvent cement complete as specified and as directed.
M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in cement mortar 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth complete all as specified & as directed.
M&L for 2nd class wroughtwood plain fillets, square, rectangular or triangular in section, cross sectional area exc 6 sqcm but n exc 13 sqcm, secured with nails or brads and fixed with screws complete all as specified & as directed.
M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified & as directed.
Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, coloumn or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in cement mortar 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete as specified and as directed.
Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed.
M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Make: Asian paints/Dr Fixit/STP/CICA as approved by GE.
M&L 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.
M&L machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade of concrete as in floors/pavements complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
S&F in repair corner shower enclosure with two fixed glass openable door fixed on wall 2200mm high and size 1601-2000 with door access 650mm complete all as specified and as directed. Make : Hindware Cat No- SU83CWG-1620H22-CR or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair shower Panel of size 1600mmx230mm complete complete all as specified and as directed. Make : Jaquar Model No : JPL-SSF-ST8896 (Shinny) or equivalent make as specified in Appx 'B' to Particular Specifications.
S&F in repair stainless steel (grade-304) railing 850mm height of design pattern including all verticles intermediate horizontal railings at spacing necessary brackets, welding, fixing arrangement etc fixed as per standard engineering practice and manufactures recommendation, including dismantle existing railling complete all as specified and as directed,.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .
Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) for any sunk of raised moulding to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed. Note : Fillets, metal frame work and G.I. wire mesh paid separately
S&F GI frame work for seamles ceiling comprising of GI perimeter channel 55mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrrounding wall using nylone sleeves and screw at 450 mm centre/intermediate channel 9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from sofit at approx 900mm centre to centre with GI cleat ad steel expansion fastners with and including ceiling section (not exc 1.2m length) of 55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S&F 12mm Galvanised steel wire netting of 0.91mm dia complete all as specified and as directed.
S&F in repair 0.50mm thick plain GI sheet for valley gutter, joints to be sealed with using epoxy adhesive, including providing hole for PVC rainwater pipes and packing the same using epoxy adhesive complete all as specified and as directed.
M&L for new plastered surfaces of wall and sanding the surface to make it smooth for painting and applying one coat of deco solvent based primer over the surface applying 3mm thick acrylic wall putty to make the surface smooth after 4-6 hrs drying time and sanding the surface and one coat of deco solvent based primer should be applied over the arcylic putty to fill the pures one step of sanding should be done before the application of 1st coat of royale base coat and 2nd coat of royale luxury emulsion diluting with water as per recommended proceedure, after the drying time 3-4 hrs applying top coat of co polymer based interior special effects emulsion which will no rag or sag on verical surface with abrasion resistance odourless and non toxic properies to provide differen type of special effetcs such as crinkles dapple weaving, canvas, spatula, colourwash, ragging, sponging, combing, brushing etc with different tools complete all as specified and as directed.
S&F in repairs aluminium (extruded section body) Door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.
S&F LED mirror of size 450x600mm wall mounted having backlit glass with warm light, white light and cool day light frame complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, hips, valleys etc complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 as in ridges/valley gutters, fixed with self tapping screws complete all as specified and as directed.
M&L for Mild steel Joist, channel, angle, or tee sections, fixed independently, without connection plate etc. (cut to ordinary length i.e within 20mm of length indicated) of Gde-Fe-290, Gde-E-165 complete all as specified and as directed.
Dismantling timber scantlings (framed work) exc 40 Sq cm in section in any position complete all as specified and as directed.
M&L non skid cermic ENDURA coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n. exc. 0.11 Sqm as in floors set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
S&F mild steel mortice lock handle set of godrej ELC 6-6 lever complete all as specified and as directed.
Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and as directed.
Taking down carefully by Submain wiring of any type making good the disturbed surface to match with existing surface complete all as specified and as directed.
Taking down old unserviceable existing SPN/TPN DB/enclousers any size and type/any descriptions as iron sheet scrap including MCB any type/size and making good disturbed surface/wall as per existing complete all as specified and directed.
M&L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall/ceiling/roof etc incl cutting & chases (making good all to the disturbed surfaces as per existing) including modular flush metal boxes with cover plate and frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge for the followings:-
One light/fan/exhaust fan point controlled by one way switch 5 amp complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way switch on same board complete all as specified and as directed.
One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.
One bell point controlled by one push button on independent board complete all as specified and as directed.
One light point controlled by two way switch 5 amp complete all as specified and as directed.
All as per item No. 143.00 here-in-above but for 3pin/5pin 16Amps socket point controlled independently, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed.
Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed.
Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.
Supply and Fixing Modular bell push 6 Amps single pole one way, 1 Module with indicator complete all as specified and as directed.
Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.
Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.
S&F ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.
S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F LED lamp 9 Watt suitable for B22 type holder, natural white complete all as specified and as directed.
S&F indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete all as specified and as directed. Make : Havells Cat Part No-FLORETINE WL-2LS B22 SS or equivalent makes in Crompton/Philips/C&S
S&F indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete all as specified and as directed. Make : Havells Cat Part No-FLORETINE WL-1LS B22 SS or equivalent makes in Crompton/Philips/C&S
S&F LED decorative bed side light fitting 3 watt complete with all accessories, on/off inbuilt switch and including connection complete all as specified and directed.
S&F indoor decorative ultra slim surface/Wall mounted LED mirror light complete fitting 1x7 watt flexible neck for adjusting beam, LED tube fitting of size (within 365x180x95mm) suitable for mirror light with metal (bronze finish) and synthetic housing & integrated electronic driver, energy efficient, 140C-270 volts, co-related colour temperature (CCT) of 3000K, warm white/cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete ass as specified and as directed.
S&F in repair surface mounted, LED Bulk Head fitting of 10 Watt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed.
S&F of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V with and including 30W LED tube all connections complete all as specified and as directed.
S&F building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.
M&L for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 10 sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 10 sqmm, one run of 10 sqmm earth wire & One run of PVC conduit shall be measured as one unit length.
S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder coated with Copper bus-bar 200Amp, two neutral link, earth bar and din rail, blanking plates, cable ties for cable management, 440 V, 4 way complete all as specified and as directed including following MCCB & MCBs with connections:- (a) MCCB 100 Amps, 4 Pole, 16KA, (Ics=100%Icu)-01 Nos (b) MCB SP 63 Amps - 2 Nos (c) MCB SP 40 AMps - 5 Nos Note : - (i) MCB & MCB /MCCB DBs shall be of same Make. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.
S&F in replacement sheet metal enclosure MCB distribution board, SPN 12 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.
S&F sheet metal enclosure MCB distribution board, SPN 4 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.
S&F in replacement MCB SPN 40-63 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.
Supply & fixing of MCB SP 6-32 Amps, 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.
Cutting holes for air ducting of exhaust fan in circle/square shape or as per site requirement in brick wall or PCC Block masonry built in cement mortar or cement lime mortar of surperficial area exc 400 sqcm but n exc 0.10 sqm to a depth of 30cm including holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 and cover old hole as required and rubbish off complete all as specified and as directed.
S&F exhaust fan 250mm sweep sturdy engineer plastic body complete with louvers, AC 230 Volt single phase 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
S&F exhaust fan 300mm sweep sturdy engineer plastic body complete with louvers, AC 230 Volt single phase 50 Hz supply and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and as directed.
S&F LED Bollard light fitting IP-65 rated flare fitted with low glare diffuser 10 watt with PC diffuser, excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding, made up of MS pipe and integrated driver with uniform light distribution with required PCC foundation complete all as specified and directed.
S&F LED Round/square recess mounted slim downlighter 15 watt, integrated electronic driver, co- related colour temperature (CCT) of 6500K, warm white/natural white suitable for roof ceiling complete all as specified and as directed.
Excavation in trenches in not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for foundations, laying of cables etc and getting out as in soft/loose soil complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick complete all as specified and as directed.
Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.
Cutting existing road/cemented plinth with width not exceeding 900mm and 1.0 m deep for laying/repair of electric cables and filling back with excavated soil except road portion which shall be make good with cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) complete all as specified and as directed.
Supplying, laying, jointing and testing of PVC flat twin core cable, heavy duty LT 1100 volts grade cable with aluminium conductor of size 10 sqmm 2 core laid in trenches/duct/fixing on walls/poles and passing through suitable size of HDPE double wall corrugated pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and as directed. Note : Rae of HDPE pipe shall be deemed in quoted rate
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.
B S ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .