Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC H NO 256 NAGARCEM CANACONA | CANACONA | SOUTH GOA | GOA | L1 | Accepted-AOC Accepted Being L1 Bidder | |
| 2 | L2₹7.7 L+₹53,751.39 (7.49%)Rejected-Finance | L2 | Rejected-Finance Rejected Being L2 Bidder | |
| 3 | L3₹8.2 L+₹98,689.65 (13.8%)Rejected-Finance 1428 BAYEM SHIRODA PONDA GOA | L3 | Rejected-Finance Rejected Being L3 Bidder |
Tender Value
₹8.7 L
EMD Value
₹17,452
Closing Date
7 Sept 2026, 11:00 amClosed
Executive Engineer DIV VIII ASW-I PWD Fatorda
Executive Engineer DIV VIII ASW-I PWD Fatorda
Providing Galvulium sheet roofing over Santa Cruz chapel in S/No. 538/1 in Milheam-Vaddo Cuncolim in Cuncolim constituency under MLA-LAD Scheme.
2026_PWD_31483_1
PWD/Div8/ASW/2001/20/26-27/L4
Open Tender
Civil Works - Buildings
Percentage
90 days
Fatorda
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
Yes
₹17,452
Yes
23 Sept 2026
1 Sept 2026
9 Sept 2026
1 Sept 2026
7 Sept 2026
1 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling G.I. sheets
roofing including ridges
hips valleys and gutters
etc. and stacking the
material within 50 meters
lead. | 230.54 | sq.m | 78 | ₹17,982.12 |
| 2 | Dismantling steelwork in
single sections in channels
angles tees and flats
including dismembering
and stacking within 50
mts. Lead | 15.26 | qtl | 147 | ₹2,243.22 |
| 3 | Removing white or colour
wash by scrapping sand
papering and preparing
surface smooth including
necessary repairs to
scratches etc. complete. | 672.55 | sq.m | 19 | ₹12,778.45 |
| 4 | Removing old loose
bottom or side cover of
RCC slab beam columns
etc. rubbing surface of
concrete steel using wire
brush and applying 2 coats
of Alkaline rust converting
primer (Feovert) after a
waiting time of 6 hrs
between coats and then
applying another anti
corrosive protective
coating system ) for
reinforcement bars (IPNet
RB) Conforms to IS-2770
Part-1 (Pull out Test)
ASTM-3963-86 (Adhesion
Test) and then applying
concrete penetrating
corrosion inhibitor (EPCO
KP100) and applying bonding new to old
concrete (Epibond)
Conforms to ASTM-C-882 the
fresh bond coat with
Polymer Modified Mortar
(Monobond) with 20mm C.
M 1:3 and finishing coat of
6mm C.P 1:3 (1 Cement:
3 Sand ) incl. cost of
transport etc. as per dir of
EIC, All the chemicals will
be of Krishna Conchem
Products Pvt. Ltd. or
Equivalent.
Brick work using common | 20.76 | sq.m | 2,086 | ₹43,305.36 |
| 5 | Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kgs/ cm2 (wire cut bricks) | 0.69 | cu.m | 9,366 | ₹6,462.54 |
| 6 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. | 3.45 | sq.m | 329 | ₹1,135.05 |
| 7 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.In tees, angles, flats and channels | 1.06 | qtl | 13,023 | ₹13,804.38 |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 1,840.93 | kg | 184 | ₹3,38,731.12 |
| 9 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. | 84.86 | sq.m | 107 | ₹9,080.02 |
| 10 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. | 250.78 | sq.m | 870 | ₹2,18,178.6 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
Tendernotice_2.pdf
PDF • 1.63 MB
BOQ_31865.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .