Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.1 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹38.8 L+₹5.0 L (14.6%)Rejected-Finance | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹39.9 L+₹6.0 L (17.8%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 | |
| 4 | L-4₹41.8 L+₹7.9 L (23.4%)Rejected-Finance | L-4 | Rejected-Finance Other than L-1 | |
| 5 | L-5₹41.9 L+₹8.1 L (23.8%)Rejected-Finance | L-5 | Rejected-Finance Other than L-1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
4 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
REPAIR AND MAINT OF ROOFING FLOORING WOODEN AND STEEL JOINERY PERIODICAL SERVICES INCLUDING CLEANING OF SEWAGE LINES SEPTIC TANKS AND MANHOLES ETC AT MANASBAL SONAMARG AND GUND UNDER GE 970 EWS
2023_MES_618563_1
GE 970 EWS -32/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹98,000
Yes
21 Dec 2023
13 Sept 2023
6 Oct 2023
13 Sept 2023
4 Oct 2023
28 Sept 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub-floors, sub-bases, and pavings etc complete all as specified and directed
Material & labour for coloured ceramic joint less non skid tiles 7 to 8mm thick, area of each tiles exc 0.11 Sqm but n.exc. 0.18 Sqm (square/ rectangular) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in cement mortar (1:6) including Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material & labour for Glazed ceramic coloured tiles 300 x 200 x 7 mm thick, as in vertical surfaces such as skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick screed bed or bedding layer in CM (1:4) including Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Glazed ceramic tiles coloured, pattern as required (dark & light shade combination) 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with and including 10mm thick backing coat in CM 1:3 after dismantling floor hearth or wall and rubbish off the premises complete all as specified and directed
Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite 6) and demolition of old stone slab complete all as specified and directed.
Material & labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
Material & labour for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar in CM 1:6 incl Demolition of brick work built in cement or cement lime mortar complete all as specified and directed
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed
Rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, mixed with water proofing compound @ 3% by weight of cement, finished even and smooth complete all as specified and directed. Note : WPC shall be measured and paid for separately.
Supply only water proofing compound, complete all as specified and directed.
Material & labour for Rendering 15 mm thick in cement mortar 1:6 on faces of brick/stone work or concrete surfaces, finished even & smooth complete all as specified and directed
Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed
Preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and directed
Preparing old decorated plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement based paint complete all as specified and directed
Preparation of old plastered surface of walls and applying two coats of exterior emulsion paint complete all as specified and directed .
Preparing old decorated plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper (approved colour/ shade) complete all as specified and directed
M&L for preparing old decorated plastered surfaces of wall including cornices, pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed
Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper over and including a coat of 2mm thick wall care putty (Make:- JK/Birla) with preparation of plastered surfaces complete all as specified and directed. Note: The time difference between one coat and two coat will be decided by Engineer-in-Charge.
Preparation of old wood and wood based materials surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
Supply & fix pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling existing old sheet any type complete all as specified & directed.
Supply & fix pre-painted galvalume aluminum zinc coating GI Based plain steel sheet 0.50 mm thick of any having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling existing old sheet any type complete all as specified & directed.
S&F in repair Veneered decorative ply wood, 6 mm thick, grade I (with BWR resin), decorative face veneers on one face fixed with nails to timber frame work in wall, ceiling, flat or sloping incl dismantling wall and ceiling boards fibre, pulp insulation etc or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed
2nd class hard wood plain fillets, sectional area exceeding 3 sqcm but not exc 6 sqcm, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed
M&L for Second class hard-wood in scantlings, clean sawn, timber fixed, incl dismantling scantling 40 Sqcm and above complete all as specified and directed
Taking down chowkhat with shutters (without taking off shutters from the frame) n exc. 1.50 Sqm complete all as specified and directed
Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm complete all as specified and directed
Taking down shutter of any description exc. 1 Sqm and n exc. 2 Sqm each and refixing in same opening by making good complete and all as specified.
Taking down shutter of any description exc. 1 Sqm and n exc. 2 Sqm each complete and all as specified.
S&F plain, solid , straight chowkat and frames , wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and directed
M&L for Pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.
S&F factory made 35mm thick 2nd class hard wood gauged/glazed skeleton shutter for door/window open rebated and prepared to receive glass gauge etc. edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in ssr part- I section -8 clause 8.23 (b). complete all as specified and directed
S&F factory made 30mm thick 2nd class hard wood gauged/glazed skeleton shutters for door/window open rebated and prepared to receive glass gauge etc.edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in ssr part- I section -8 clause 8.23 (b). complete all as specified and directed
S&F factory made 35 mm thick II nd class hardwood plain framed panelled shutter ( two panels) with panels of timber flat on both sides feather edged, or of veneered particle board medium density or particle board with commercial face complete all as specified and directed
Factory made solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified.
S&F in repair mild steel wire cloth galvanized 0.56mm normal dia of wire and average width of aperture 1.18mm complete all as specified and directed
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm in each panes complete all as specified and directed
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane including hacking out of glass panes complete all as specified and directed
Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Preparing new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed
300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.complete all as specified and directed
Aluminium handles, cast type anodised 150mm size complete all as specified and directed
Aluminium handles, cast type anodised 100mm size complete all as specified and directed
200 mm long aluminium tower bolt, complete all as specified and directed
S&F Mild steel pressed handles, oval type, stove enamelled black 150 mm size complete all as specified and directed
125 mm size butt hinges medium wt. of cold rolled mild steel complete all as specified and directed
100 mm size butt hinges medium wt. of cold rolled mild steel complete all as specified and directed
M&L for preparing old decorated plastered surfaces of ceiling including cornices,pilastered etc by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed
M&L preperation of old decorated surface of Steel sheet (corrugated or semi corrugated) roof of any description by brooming down or steel wire brushing, washing with water and removal of rubbish from roof surfaces and applying two coat of synthetic enamel paint in approved colour/ shade/camuflauge pattern after preparation of surfaces complete all as specified and directed
Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash incl preparation of surface complete all as specified and directed
Preparing new plastered or unplastered surfaces of wall and applying three coats of white wash incl preparation of surface complete all as specified and directed
Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars complete all as specified and directed
Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, without glazing bars complete all as specified and directed
Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe.290.Gde-E-165 complete all as specified.
S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified
M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in hold fasts, complete all as specified.
S&F in repair 2nd class Hard Wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads cross sectional area exc 13 sqcm and n exc 25 Sqcm complete all as specified.
S&F in repair 18/19 mm thick decorative block board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup boards with 6mm thick teak wood lipping, fixed with screws all round complete all as specified.
S&F in repair continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps 30mm (when open).
Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified.
S&F in repair Mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.
S&F in repair harrison curtain rails of anodised alluminium alloy with fixing brackets, stops rollers etc complete all as specified.
S&F in repairs Anodised aluminium snap grid frame work for false ceiling all as specified size of Grid 605 x 605mm complete all as specified.
S&F in repair 10mm thick plaster of paris ceiling board (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified.
S&F in repairs Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.
S&F in repairs brass Mortice lock, 4 levers, vertical type, size 100 mm of Make : Godrej or equivalent, complete all as specified.
M&L for cleaning of SGSW / RCC / PVC sewage line upto 250mm dia by rodding / auger rods & drain pipe machine as required from manhole to manhole including gully trap and getting out the sludge from any size of manholes & gully traps before & after cleaning process of SGSW / RCC / PVC sewage line and well flushing using clean water through water bowser pipe of any capacity (arranged by the Contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance n. exc 250m with and including taking off manholes / gully trap covers and re-fixing the same after cleaning process complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 75.00 per RM for every day.
M&L for cleaning / taking off of sludge (solid / semi solid) of any state from manhole of any size including gully trap having depth upto 3.00m by using machinary or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size from habbatient area and returning & filling with excavated materials upto ground level including removal of surplus soil to a distance 250m with and includig taking off manholes / gully trap covers and re-fixing the same after cleaning process complete all as specifed and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-I to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 295.00 per Each Job for every day.
M&L for opening / cleaning of blocked WC of any type, traps and CI / PVC drain pipe including fittings (i.e. access door bends / tee etc) of any size at any floor & position with and including taking down of CI / CP / PVC grating and refixing the same at position with appropriate materials / fittings i.e. white cement, solvent, nuts & bolts etc and well flushing, pressure pumping, taking out all residue materials etc and removing the same to distance not exc 250 mtr, burried the same underground by digging pit of suatible size from habbatient area and covering same wrt the earth level including removal of surplus soil to a distance 250m, complete all as specified and directed by the Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints and completion report will be submitted to concerned JE / AGE in the same day i.e. before 1700hrs. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 110.00 per Each Job for every day.
M&L for dewatering of contaminated waste effluent from septic tank, soakage well of any capacity by sewer jetting cum suction machine vehicle / honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 730.00 per Cum for every day.
M&L for cleaning of septic tank of any capacity and depth including inlet / outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid / semi solid sludge to liquid state by using extra water provided by the Contractor if required and getting out through sewer jetting cum suction machine vehicle / Honey sucker machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. Note : 1. The Contractor / site supervisor will attend the complaint cell of AGE B&R-III to receive the complaint slips daily at 0900hrs to carry out the complaints within 48 hrs from receipt of compalints slip and completion report will be submitted to concerned JE / AGE before 48hrs as per complaint slip time. 2. If Contractor is to be failed to carry out to completion the jobs within the stipulated time period, the recovery will be chargeable at the rate of Rs. 1000.00 per Cum for every day.
M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shaft,wells,cesspits,manholes,sewage line,pier holes n.exc 10 Sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil compete all as specified.
M&L PCC (1:3:6) type C2 in foundations, filling and mass concrete to sub base of manholes etc complete all as specified.
M&L for PCC 1:2:4 type B1 as in coping, hunching and benching to manholes complete all as specified.
Returning, filling in soil, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer as in soil all as specified.
Removal of excavated incl material (Soil) to a distance n.exc 50M and depositing where directed at a level not exceeding 1.50M above the starting point.
Dismantling of cast iron, PVC, SGSW Pipe or asbestos pipe set in any motrar and connections of any dia complete all as specified and directed.
S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (110mm bore) complete all as specified and directed.
S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (75mm bore) complete all as specified and directed.
S&F PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (50mm bore) complete all as specified and directed.
S&F PVC (SWR) bend 110mm dia any radius complete all as specified and directed.
S&F PVC (SWR) bend 75mm dia any radius complete all as specified and directed.
S&F PVC (SWR) branch piece, (single Y) equal or unequal 75 mm dia complete all as specified and directed.
S&F PVC (SWR) junction (single T) equal or unequal (75/ 110mm dia) complete all as specified and directed.
S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.
S&F in repair Stack clamps for 100/110 mm bore of pipe made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc all as specified.
S&F in repair Stack clamps for 75 mm bore of pipe made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified.
S & F in repair vitreous china urinal bowl type flat back, size 465 x 355 x 265 mm, white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe complete all as specified and directed
S&F in repairs for 10 ltr PVC valveles, syphonic action type, fiushing cistern low level white with inlet , ball valve, float and handle including brackets and flush pipe of polyethelene of low or high density or PVC 32mm dia complete all as specified and directed.
S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed
Supply & fix in repairs 20mm dia gun metal gate valves with iron wheel screwed both ends for iron pipe complete all as specified and directed.
Supply & fix in repairs 15mm bore brass wall mixer CP for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Supply & fix in repairs 15mm bore brass central hole, basin CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate ) bedding, connection to trap, outgoing flushing pipe, anti sypohonage pipe,100 mm bore 'P' or 'S' of pipe etc, fixed in repair complete all as specified and directed.
S & F in repair vitreous China wash hand basin white flat back of size 550 mm x 400mm fixed on existing brackets including 32mm dia brass waste coupling and 32 mm dia PVC waste pipe (rigid quality) etc. complete all as specified and directed.
S & F in repair pillar tap cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified.
S&F in repair brass chromium plated shower rose 65mm to 90 mm size with swivel joints, complete all as specified and directed.
S& F in repair PVC connections 15 mm, 450 mm length with PTMT nuts at both ends complete all as specified and directed.
S&F in repair bib taps cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed.
S&F in repair health faucet assembly, brass, chromium plated consist of valve, sprayer, PVC flexible pipe for EWC suitable for 15mm bore pipe, complete all as specified and directed.
M&L brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 incl demolition of old brick work complete all as specified and directed
Supply and fixing in repair 3-layer PP-R Polypropylene random copolymer pipes of 16mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed.
Supply and fixing in repair 3-layer PP-R Polypropylene random copolymer pipes of 25mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed.
M/s Nasir Rasool Dar
M/S SHOWKAT AHMAD WANI AND SONS
M/S ELITE BUILDERS
M/S M.Y Enterprises
M/s Bashir Enterprises
M/S maqsood enterprises
rafiq trading co
M/S MIR SAJAD ENTERPRISES
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .