Providing and fixing of 35 H.P. Openwell submersible Pumpset to Lakshmana theertha pumphouse (Standby). Drilling of borewell, providing & fixing of pumpset near Church, Ward No 14. Supply of PVC & GI pipes for maintenance work for CMC, Hunsur

Providing and fixing of 35 H.P. Openwell submersible Pumpset to Lakshmana theertha pumphouse (Standby). Drilling of borewell, providing & fixing of pumpset near Church, Ward No 14. Supply of PVC & GI pipes for maintenance work for CMC, Hunsur

Supply, errection, trail running, performance test and commissioning of Open well submersible centrifugal pumpset (Horrizontal Type) of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) ha...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality. (screwed end) : (P.No.117, It.No:13.4.5, PWD Elec SR Vol-2)

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class 1 Accuracy Energy Meter (Page 15, Item No. 35.01 of ESCOM SR)

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. Flat with bolts, washers etc, and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 50 ...

Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wit...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 Amps. (P-14, It-5.7.2 of PWD Elec SR Part-3)

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking capaci...

Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities. (I.No.5.3, P.No.14, PWD Elec SR Part-3)

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. upto 5 kVAR. (I.No.5.4.1, P.No.14, ...

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 12" x 12" x 3" ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120 sec setting (P.No.21, I.No:5.47 PWD Elec SR...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Supply of 50 mm dia B class GI Pipe. (I.No: 39 A(iv) , P.No.159, KPCL SR Vol-4)

kV 1.1 , XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975: 25 Sqm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable, 2.5 to 25 Sqmm. (Page 52, Item No. 21.05 of ESCOM SR)

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 90 mm dia PVC couple...

Supply of PVC pipes of 6 Kg/cm² for 90mm dia. (P-A-44, Sl No:658 of 2023-24 SR for Water Supply and UGD Works Vol-5)

Supply and delivery at site special moulded variety PVC bend as per IS

7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its

latest amendments. 90 mm dia (P, No:118, Sl No 10.11.7 o...

Supply of medium duty GI pipe. 32mm dia. (P-A-31, Sl No:199 of 2023-24 SR for Water Supply and UGD Works Vol-5)