Renovation / Refurbishing of Anatomy lab at G F Ward Block.

Amount

REMOVING PLATFORM: Removing of existing platform with sink and pedestal top cudupah or any other stone etc. carefully shifting the materials to the place as per instructions removing debris from the premises cleaning the area making the surfaces good with CM to match the existing surface curing etc. Complete all as specified.

Providing & fixing of Metal Armstrong metal tiled false ceiling for existing false ceiling by replacing existing perforated Gypsum sheets. Refixing existing damaged grid of size 2'x2' with proper alignment including fixing of new grid supports at necessary locations. All the grid supports are to be properly suspended from ceiling. Also removing of existing false ceiling & stacking down all serviceable material is in scope of contractor as directed by EIC.

15mm thick for wall CEMENT PLASTERING: Cement Plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls of concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site including scaffolding curing, etc. complete all as directed by Engineer-in-Charge.

PLASTER BREAKING: Labour charges only for removing existing metal/ damaged / cracked / loosened cement / neeru /rough casts and faced plaster or tile work with back coat at all floors and levels including leaning the surfaces clear of all loose concrete/mortar foreign materials, carting away the debris out of hospital premises including scaffolding raking concrete surfaces etc. complete with quantities to be executed as and when required and as directed by the Engineer- In-Charge.

Providing & applying one coat polymer based polysafe-plastone bonding chemical to concrete surface including cleaning the existing surface by grinding/wire brushing etc. complete as directed by engineer-incharge

Providing & applying - polymer polysafe plastone 25mm thick with cement mortar 1:3 with river screened sand in all positions by using approved polymer chemical (as per the IS std) specification and finishing the surface smooth, curing etc. complete as directed by engineer-incharge.

Providing & applying of epoxy or polymer Modified mortar (PMM) of approved make especially in columns, beams, and damaged RCC Structures with polymer, cement and quartz sand ratio ,1:5:15 of standard thickness to restore all broken concrete in required proportions to RCC members including removing damaged structure or layer of plaster for repairs of steel & concrete, hand packing/trowelling, curing, making the surface rough for neru plastering etc. complete as directed by EIC (Wherever required)

LAB TABLE Providing, fabricating and fixing at required location Lab type table consist of i) Table top of 750mm wide 25mm thick solid commercial block board with 6mm TW lipping to all exposed edges around the table tops also to have front facia75mm deep with 20mm thick commercial ply of approved make with 6mm thick T.W.lipping & 19mm thick work commercial ply for support as per required at site or as shown in drawing with 6mm thick T.W.lipping patti for all exposed edges. All exposed surfaces should be 1.5mm thhick approved plastic laminated and all the surfaces to be laminated wherever required in general with 1mm thick lamination .

STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.

1.00 mm thick with zinc coating not less than 275 gm/m²CORRUGATEDG.I./PPGI SHEET:Providing & fixing corrugated sheet/GI /PPGI sheet closefitted serrated adjustable corrugated /semicorrugatedsheets including overlaps, ridges if requiredincludingsupplying and fixing necessary J or L hooks bolts, nutsas washer and bitumen was hers withscaffolding etc.complete all as directed by theEngineer-in-Charge.

Removing old sun control films 1.5-2 mil thick film on window glasess without damaging rubber gaskets, handle , friction hinged etc complete including neccesary scaffolding job is to be completed as per film specification and as directed by EIC

Providing and fixing vertical blinds (Premier Quality) 100mm regular quality make made from 100%polyster yarn coated with fade resistance polymer to ensure minimum light transmittance having suitable coating on exterior in all respect as per design and instruction of EIC. Scope also includes removing of existing blinds and handing over to the concerned engineer or disposing the same as per the instructions of Engineer-incharge.[AS PER SAMPLE AVAILABLE AT SITE] [Payment will be made on actual Mesurement basis. Windows mesurement to be taken before installation of roller blinds for achieving one piece work. ]

FLOORING BREAKING: Dismantling carefully the existing damaged cracked serviceable tiles/slabs/clay tiles/Marble slab/granite slab/Kota stone/tandoor stone/Shahabad stone and all types of flooring in flooring etc. including removing the 20mm thick bedding of cement mortar stone grit or brick bat coba etc. at all floors & levels including stacking of serviceable material out of hospital premises as directed by the Engineer-in-Charge.

VETRIFIED DADO/ FLOOR TILESSize of tile 60x60 cm (2' x 2') (joint free): Providing & laying polished vitrified floor tiles in different sizes (thickness to be specified by manufacturer) with water resistant less than 0.08% and confirming to IS 15622 of approved make in all colours & shades, laid on 20mm thick cement mortar 1:3 ( 1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Storage unit With shutterWOODEN CABINETwith inner side 0.8mm thk LaminateWith shutter :Providing & fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8mm commercial ply approved make for back side Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.5mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, kNosbs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm Thick T.W. lipping patti.locking arrangement with Godrej multipurpose lock etc. all complete as specified & directed by Engineer-In-Charge.

Providing and fixing in position Stainless Steel sink of size 550*450*200mm of Nirali make only resting over bracket with all necessary fixtures(water tra, stop cock, piller tap etc.) as per the specified and directed by engineer-in charge.

Area of slab over 0.50 sqm GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

BISON BOARD PANELProviding & Fixing following thickness Bison Board pannels for Boxing, partition works including necessary hardware and adhesive etc. complete. 12 mm thick

STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.

225mm thick SOLING: Providing & laying rubble stone soling using spotless stones below floors roads/pavements etc. mechanically / manually consolidated thickness as specified below with stones vertically handset interstices packed with smaller stone chips, binding with murrum & sprinkling water for proper consolidating and finishing to required levels in quantities as and when required etc. complete all as directed by the Engineer-in-Charge.

PCC 1:2:4 using 20mm max. size aggregate.Plain cement concrete using graced stone aggregate of 20mm / 40mm max. size including consolidation using vibrator & needle if required finishing, curing, form work shuttering, centering etc. complete all as per specification and in quantity as & when required by the Engineer-in-Charge,

Re-doing the joints of laid APP membrane joints with hot brutane toarch, looseing and re-sealing the joints, with application of primer & new APP membrane sheets with approximate with of 100-125 mm width complete in all respect as directed and instructed by Engineer-in-charge.(Area will be measured thoughout & payment will be made as per actual sheet applied on the joints)complete as directed by EIC (Wherever required)

Application of thixotropic high build bitumen emulsion modified with latex rubber which should be compliant for ASTM C309 BS 8102 ASTM D2939 & should have properties such as Elongation>500% Bond to cure >0.7Mpa,Softening point > 98 degreescomplete as directed by EIC (Wherever required)

Application of Poly urethrene base waterproofing membrane which should be compliant for ASTM C836 SCAQMD rule 1113 & should have properties such as hardness >= 70A, Tensile strength >= 1.75 Mpa Elongation >= 400% Tear resistance (ASTM D624) >= 16N/mm Low temp crack bridging (ASTM C1305) 3.2 mm extensibility after heat ageing (ASTM C1522) should not show any sign of cracking above 5 mm Addition in peel after water immersion (ASTM C794) >=60N Adhesion strength (ASTM D 4541) >=0.75 MPa VOC=< 40g/Lcomplete as directed by EIC (Wherever required)

Luster paint With two coats of primer and two coats of paint :Providing & Applying two coats of primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors,aluminium window frame & glassetc including scaffolding etc as to the entire satisfaction of engineer in charge.

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.

Plastic Paint Providing & / two coats of primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors,aluminium window frame & glassetc including scaffolding etc as to the entire satisfaction of engineer in charge.

Fungal paint Providing and applying including scrapping by wire brush removing the existing paint dirt etc. to wash the surface with anti fungal wash. Apply one coat of Argus SB-65 and allow to dry for 4 to 6 hours thereafter application of two coats of ACC-30 (Anti-condensation coating) of Chemisol Adhesives Pvt. Ltd. (chemistik).

Lighting

Supply ,Installation,Testing & Commisioning of LED fixtures shaped 36 Watt 2ft x 2ft Premium Range Recessed Downlighter having pressure die-cast aluminimum housing with white front bottom frame suitable to following features. LED fixture to be fixed surface of concealed as per site requirement with fixing arrangement / chain etc. -In built electronic LED pre wired driver, -Provision of Spring loaded Mounting clips/ hanging chain -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4000K to 6000K (full white/milky white) LED concealed square type / round type , seemless, high efficiency and premium range as per technical specification directed by OIC - ES

SITC of 18W surface mounted LED lighting fixture

Fan and Accessories

SITC of 1200mm Ceiling fan White/ Brown colour as per requirement including down rod, double ball baring, decorative, with D-hook & fixing accessaries etc. all as per instructions and as directed by E-I-C, ES. In case of replacement old/removed item shall be returned to E-I-C, ES as it is.

Supply & fixing of Ceiling fan regulator/ dimmer (400/600W) modular type

Power points / Wiring / PVC conduits

Supply, erection, testing & commissioning of sheet metal powered coated distribution boards inclusive of MCBs with bus bar, neutral link & connection wire set etc IP-42. 12 way SPN distribution board with 63 amps DP MCB--1 No. /// 40 amps DP ELCB(30 mA)--1 Nos /// 25 amps SP MCB (10 Nos.

SITC of PVC Casing Capping 1.25 inch with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.

SITC of PVC conduit/ Truncking of 25mm /32mm size with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.

Supply & fixing of 25 Amps 2 Pin + Earth (for AC) reroll type Crompton/ MDS or approved make metalic sockets- 1 NO //// 25 Amps DP MCB & Socket with separate Neutral link as controling S/W - 1No.//// 25 Amps with enclosure box. Crompton make metalic top- 1 No. for above socket.

Supply & laying of 1core X 1.5 sq. mm flexible copper wire FR PVC through pvc casing capping / conduits as per site conditions

Supply & laying of 1core X 2.5 sq. mm flexible copper wire FR PVC through pvc casing capping / conduits as per site conditions (Red, Black, Green)

16 Amp,5 pin, switch socket combination board

Modular accessories Switch/Socket/Board

SITC of 5A/6A Switch Modular type with removing of existing switch

SITC of 15A/16A Switch Modular type with removing of existing switch

SITC of 5A/6A scoket Modular type with removing of existing switch

SITC of 15A/16A 5 pin scoket Modular type with removing of existing switch

SITC 3 way face plate modular

SITC 6 way face plate modular

SITC 8 way face plate modular

SITC 3 way surface box modular

SITC 6 way surface box modular

SITC 8 way surface box modular

SITC 12 way surface box modular

SITC 12 way face plate modular

SITC 1 way TV socket modular

Network / Telephone

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS (modular data socket)

Supply & laying of CAT_6 LAN cable for DATA including 25mm PVC Conduit with accessories

SITC of Telephone instrument Called ID

Supply & fixing of RJ-11 modular telephone socket with G.I. switch box, modular plate including connections as required.

LAN cable for telephone including 25mm PVC Conduit

Supply,Installation,Testing & commissioning of Split AC as per below Specification

Capacity: 2.0 ton Star rating: 5 star Technology:- Invertor Coil material (Evaporator & Condenser): Copper Classification by function: Cooling only Refrigerant: Ecofriendly Power Suppy: Single phase, 50 Hz

Additional Accessories required for Installation (Including installation)

Copper Pipe with Insulation sleeve (in pair) 3/8'', 1/4'' or as per OEM standards.

Flexible Copper Cable 4C x 2.5 sqmm

Drain Pipe 3/4" with fittings

Outdoor Stand L type or as per instructed by EIC

Core cutting

Dis-mentally of existing split AC & Re-installation, commissioning & gas charging of 2 nos 2.0 Ton Split AC

JAYLAXMI ENTERPRISE

M J INFRA PROJECT