Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹40 L
EMD Value
₹40,000
Closing Date
20 Jul 2020, 3:00 pmClosed
Project Director, DRDA
DRDA, Collectorate, Vengikkal, Tiruvannamalai
Construction of Value added Production Godown building in Attipattu at Kovilur Panchayat in Jawadhu Hills Block in Tiruvannamalai Under SBGF 2019-20
2020_RDTN_171310_1
Roc. No. A13/1884/2020 Dt. 26.06.2020 Jaw2
Open Tender
Civil Works - Buildings
Lump-sum
180 days
Jawadhu Hills
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹40,000
24 Jul 2020
14 Jul 2020
20 Jul 2020
14 Jul 2020
20 Jul 2020
14 Jul 2020
Amount
Construction of Value added Production Godown building in Attipattu
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.
Supplying and filling in foundation and basement with filling excavated earth in layres of not more than 15 cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,
Sand filling with good river sand in layres of not more than 15 cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,
Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete comply
Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete.
Supplying and erecting centring for sides and suffits including supports and structing upto 3.29m height for plane surface in all cross bracting using MS sheets of size 90 x 60cm and 10kg stiffened with angle of size 25 x 25 x 3mm for boarding laid over silver oak joists os size 10 x 6.5mm at about 90cm C/C and supported by casuring props of 10cm 13cm dia at C/C etc., complete
For Below Ground level & Grade Beam
For Plinth Beam & Column
For Lintle
For Sunshade & Roof Beam
Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete
RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wh
Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.
Paving the floor with scrach proof Design ceramic tiles of any colour and 305x305x6mm size laid in CM 1:2, 20 mm thickand pointing with white cement using 0.4kg/Sq m mixed with colouring pigments to suit colour of the tiles including finishing etc., complete
Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.
Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .
Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors.
Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covere
Rolling Shutter Door size 2.10mx2.10 m
Door size 0.90mx2.10 m
Toilet Door
Ventilator size0.60X0.45M
Fabricating Supply and fixing and position of Truss with Built up sections of angle,flat and plate etc complete complying with standard spections. Truss Work
Cost and supply and fixing of Galvalume Sheets including conveyance charges and all labour charges etc complete complying with standard specifications Cooling sheets
Towards the cost of providing EWC & Sanitary arrangements and Fixing of Wash basins and taps
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
G.S. Construction
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .