Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹16.9 LAWARDED | AWARDED |
Tender Value
₹16.1 L
EMD Value
₹20,200
Closing Date
23 Dec 2025, 10:00 pmClosed
Minor Irrigation Department
FILLING TANKS
MI/2025-26/OW/WORK_INDENT9053
MI/2025-26/OW/WORK_INDENT9053
Reserved
Other Works
Electronic Documents, First(One Cover)
Minor Irrigation Division Bengaluru
₹500
₹20,200
8 Dec 2025
8 Dec 2025
23 Dec 2025
ANNUAL MAINTENCE OF TUNGANI RAMPURA LIFT IRRIGATION SCHEME IN KANAKAPURA TALUK RAMANAGARA DISTRICT.
Providing pump operator for maintenance and working of pump, motors, panel boards for 8 to 10 hrs/day pump working duration,(1x30 days= 30man days per month) As per the direction of engineer in-charge...
patkaries (sowdies) (2x30 days=60 man days per month) as per the direction of engineer in charge of work.
Watch Man,(1x30 days= 30 man days per month) as per the direction of engineer in charge of work
Providing and supply at site and refilling new transformer oil to oil cooled starters and transformers. as per the direction of engineer in-charge of the work.
Grease GEM RR3 and etc, complete with all lead and lift loading and unloading as per the direction of engineer in-charge of the work.
Work of overhauling and servicing upto 1250KW, 6.6 KN motor as specified below: a) Disconnect the HT/LT cable and record motor details take out the motor from bed, b) Check alignment and required deta...
Work of replacement faulty control components and modification and rewinding of soft starter panel upto 1250 KW/6.6 Kv motor as specified below: a) Disconnecting the power cable and control cables. b)...
Work of rewinding of HV side upto 100KVA power transformer as specified below: a.Switch off Power supply of transformer Isolator feeder and discharge with discharge rod. b.Disconnect the input and out...
Work of repair and rewinding of LV side upto 100 KVA power transformer as specified below: a. Drain out the contaminated transit oil completely from the reactor; flush the windings of the transformer ...
Supply and brazing of motor end lead cable by using H.T Copper lugs, brazing materials, gas, soldering past, etc as original for all the three phases for motor. As per the direction of engineer in cha...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .