SPECIAL REPAIR TO OTHER RANKS MARRIED ACCN BLDG NO P 87 AT ADMINISTRATIVE AREA CPE ITARSI AND PROVN OF SHED FOR CLEANING MAINT OF GUN SIZE OF SHED 27M 9M HT 4M IN EQPT DIV AT TECH AREA TAKU CPE ITARSI UNDER GE BHOPAL

Amount

This work comprises of :- (i) SPECIAL REPAIR TO OTHER RANKS MARRIED ACCN BLDG NO P-87 AT ADMINISTRATIVE AREA, CPE ITARSI UNDER GE BHOPAL (UNRESTRICTED AREA) (ii) PROVN OF SHED FOR CLEANING/ MAINT OF GUN (SIZE OF SHED 27MX 9MX HT 4M) IN EQPT DIV AT TECH AREA TAKU CPE ITARSI (RESTRICTED AREA) Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

SPECIAL REPAIR TO OTHER RANKS MARRIED ACCN BLDG NO P-87 AT ADMINISTRATIVE AREA, CPE ITARSI UNDER GE BHOPAL (UNRESRTICTED AREA)

Demolition of Cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) including surface finishes of any type ie tiles, kota stone complete all as specified and directed

Excavating over areas, under floor n exc 1.5m deep and getting out any type of soil below floor complete all as specified and directed.

M&L for Moorum and sand filling under floors or pavings laid in layers n exc 15 cm thick spread, levelled and rammed including watering (Sand and moorum will be mixed in ratio 1:1) complete all as specified and directed.

Taking out existing hardcore laid under floor area depth not exceeding 15cm thick and deposited outside at distance not exe 50 m and refilling the same after sand/mooram filling spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub floor finished even and rough for receiving further floor finishes.ie tile etc complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement complete all as specified and as directed.

M & L for anti termite treatment for treating the soil under floor at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc 1.5 Sgm each and making good of disturbed surface match the existing surface complete all as specified and directed.

All as per item No 10.00 above but exc 1.5 Sgm but not exc 4 Sgm each

M&L for plain cement concrete cast in situ 1:3:6 type C0 (using 12.50 mm graded stone aggregate) as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.

S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete size /profile of frame as per IS including one shop coat of primer complete all as specified and directed.

S&F 105x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates,hinges,hold fast(40x3mm) etc. complete size /profile of frame as per IS including one shop coat of primer complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubing down with water etc complete all as spcefied and directed.

M&L for 15 mm thick cement plaster on wall as in cement mortar 1:6 on brick or concrete surface other than fair finish & finishing with surface even and smooth complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM 1:3 on ceiling of concrete surfaces and finished the surface even and smooth complete all as specified and directed.

M&L for 15 mm thick cement plaster externally in CM 1:4 mixed with WPC as per manufacturer instructions with cement and finished fair and even complete all as specified and directed. (Note :- WPC shall be measured & paid separately)

Supply only water proofing compound of approved make complete all as specified and directed.

M&L for cutting "V" section to cracks in existing roof or terracing/brick wall including cleaning, and grouting with cement sand slurry 1:3 complete all as specified and directed.

S&F of wire netting as chicken wire mesh of galvanised steel wire 0.71mm dia and size of mesh 25mm for cracks fixed with nails etc complete all as specified and directed.

M&L for applying 2 coat of white wash including preparation of new plaster surface on ceiling complete all as specified and directed.

M&L prepration of old decorated plastered or un plastered surface including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for two coat oil bound distemper over a coat of alkali resistant primer on new plastered surface on wall including prepration of surface complete all as specified and directed.

M&L for two coat oil bound distemper on old surface including complete removal, washing, rubbing down and stopping of existing treatment overand including a coat of 1mm thick JK Birla wall care putty and making the surface even and smooth and filling the uneven and small holes and making the edges of plaster properly by plaster of paris complete all as specified and directed.

M&L for two coat cement base paint over a coat of white wash on new plastered surface including prepration of surface complete all as specified and directed.

M&L for two coats cement base paint on old plastered surface including complete removal of existing tratment washing down and rubbing and prepration of surface complete all as specified and directed.

S&F factory made 30mm thick flush shutters, soild core construction, with block board core and plywood face panels and one face is covered with decorative face veneer with lipping / frame to match complete all as specified and directed.

S&F factory made 35 mm thick IInd class hard wood glazed and skelton shutters, open rebeted and prepared to receive glass, gauze etc (without sash bars ), edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) complete all as specified and directed.

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing as per specification complete all as specified and directed.

S&F factory made 30mm thick PVC factory made panelled door shutter as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification complete all as specified and directed.

S&F window ECO 4000 of double rebate openable /fixed windows made of galvanised steel colour coated /powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 grams /sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick outer frame section 72 x 55mm, centre mullion section 72 x50 mm, shutter section 47 x20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x12 mm, outer frame and mullion shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars /grills, the sections cut to length mitre joined with corner bracket, centre mullions cap, stay, handles, latch, 2 Nos tower bolts, 2 Nos of heavy duty stainless steel pivot hinges per shutter and penelled with 5mm thick plain float glass and SS mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self expanding screws, including 10mm square bars welded to 6x12mm flat at a distance 150mm C/C (pitch) etc. complete all as specified and directed. Make : NCL Allek Seccolor Ltd (Model :ECO 4000) or equivalent as approved by GE)

S&F 100mm size MS butt hinges medium wt cold rolled complete all as specified and directed.

S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of etruded section and fixed complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp 250mm, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed staple plate and fixed complete all as specified and directed.

S&F of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed.

Supply and fixing Deco window door seal Alluminium plate with Nylon brush ivory matt length 94 CM / 36.5" and width 2.5" complete all as specified and directed.

S&F 2nd class HW small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours articles n.exc 200 Cu. cm each complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick sheet frosted glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

M&L galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for pressed steel frames for cup board chowkat of size 60x40mm with one or more rebates incl necessary fixing lug, hold fasts etc and one coat of red oxide primer complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board interior grade, prelaminated on one side with decorative choice lamination fixed with screws to timber frame work including teak wood beading complete all as specified and directed.

S&F100mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinges plate and fixed with screws complete all as specified and directed.

M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on surface of any description over 10cm width or girth complete all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but n.exceeding 0.11sqm as in floors set & jointed in neat cement slurry & pointed in white or coloured cement to match the tiles over including screed bed 15mm thick in cement mortar (1:4) for laying floor finished complete all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but n.exceeding 0.18sqm as in floors set & jointed in neat cement slurry & pointed in white or coloured cement to match the tiles over including screed bed 15mm thick in cement mortar (1:4) for laying floor finished complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured edge cut tiles 350x250x7mm thick on vertical surfaces such as skirting dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 20-25 mm thick cuddapa prepolished stone over and including 10 mm thick cement mortar (1:4) bedding laid & jointed with slurry cement mixed with pigment to match the shade of the slab including rubbing and polishing, rounding to edge of stone slab one edge, such as steps, cooking platform and similar situtions complete all as specified and directed. (Note-Quoted rate shall deemed to include for making hole in stone slab for accomodate the gas pipe where required.

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed.

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes including S&F 20mm dia pvc float valve assembly complete all as specified and directed.

S&F in repair gun metal, globe or gate valves for 15 mm dia bore pipe with iron wheel head, screwed both ends for iron pipe and fixed in repair etc complete all as specified and directed.

S&F 15 mm nipple suitable for HDPE water tanks including necessary driling holes etc fixed complete all as specified and directed.

S&F in repair stop valves 20mm cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plug washers and waste pipe including fixing contilever bracket and connecting union to pipe over all size 495 mmx 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

Taking down GI tubing 20mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.

M&L for Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old GI pipe 15 mm bore & connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old GI pipe 20 mm bore & connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repair 15mm bore bib tap chromium plated fency type. cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore angle valve /stop valve chromium plated fency type cast copper alloy screwed down high pressure, crutch or butterfly handle, screwed both end for pipe or for unions complete all as specified and directed.

S&F in repair PVC low level 10 litre capacity valveless syphonic action type white flushing cistern with inlet ball valve float and handle including brackets and necessary fittings etc complete all as specified and directed.

S&F in repair viteress china squtting pan "ORISSA PATTERN" size 580x440mm white with integral foot rest and flush pipe complete including provision of concrete bedding 1:2:4 type BO complete all as specified and directed.

S&F in repair WHB white size 550x400mm vitreous china (flat back or angle back type) any size, including cutting for and pinning end of bracket or eracting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F towel ring of PTMT fixed with and includuding chromium plated brass screws and wooden /platic cleats (Miminum weight 90 gms) complete all as specified and directed.

S&F in repair pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.

S&F PVC connection 15mm bore size with PTMT nuts of length 450mm long complete all as specified and directed.

S&F 32mm dia PVC pipe low density (LDPE) of pressure 6kg/CM2 fixed to wall or laid in floor as waste pipe complete all as specified and directed.

S&F in repair PTMT swivel shower rose any colour (Minimum weight 40gms) for fixing with 15mm dia pipe including shower arm 195mm long with bend 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and directed.

S&F in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup (concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F 75 mm out let SWR floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate complete all as specified and directed.

Demolition and breaking up or down 75/100mm internal dia of pipe PVC /AC/CI / Cement rain pipe fixed in any position complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

S&F PVC (SWR) junction single (Single T) equal or unequal 110 mm dia provided with access door complete all as specified and directed.

S&F PVC (SWR) cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) gully trap 110 mm setting and jointing with solvent cement complete all as specified and directed

S&F 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia provided with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single T) 75mm equal or unequal provided with access door complete all as specified and directed.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete all as specified and directed.

M&L plain cement concrete cast in situ 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form works as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for 10mm dia and over TMT bar, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia) including welding, rivetting etc complete all as specified and directed.

M&L for cleaning surface of sunken portion wall/bottom and applying cement slurry @1.2 Kg per Sqm and applying 15 mm thick cement plaster in CM 1:3 finished even and fair using extra cement and applying two coat of acrylic polymer modified cementious slurry as per manufactures instruction to make the surface leak proof complete all as specified and directed.

S&F Curtain rails 20mm dia fix in repair, mild steel, chromium plated with fixing brackets, stops, rollers and finnels etc. and with all necessary fittings complete all as specified and directed.

Demolition brick work or stone / boulder masonry built in cement mortar as in wall etc complete all as specified and directed.

M&L for brick work with sub class 'B' brick modular size in CM (1:6) straight or curved on plan exc 6m mean radius as in parapet wall etc complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. [MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL/ make as per Appx 'C']

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. not exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down/removing the existing roof treatment including backing coat if any and disposal of debris to a distance not exceeding 100m as directed by Engr-in-Charge and M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3.60 KG/SQM and thickness of membrane not less than 3mm laid in following sequence complete all as specified and directed.:- (a) Applying 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment. (b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment. (c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated. (d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method. (e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction.

Taking down carefully aluminium / copper point wiring with surface/ concealed PVC conduit or wooden batten ( light, fan, socket, bell or power ) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bell, light fitting any sketch etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for Point wiring with FRLS PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed rigid non mettalic PVC conduit medium grade not less than 19/20 mm (ISI marked) with all fitting and fixing accessories including metal flush box and white sheet cover of any module as required at site etc and 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly including make and matching the existing surface complete all as specified and directed for the following :-

One light point/fan point controlled by one switch

One light point controlled by two way switch

One socket outlet 5 Amps controlled by one switch on the same board.

One socket outlet 5 Amps controlled by one switch on independent board.

One bell / buzzer controlled by one bell push.

All as per item No. 101.00 above but with 2.5 sq mm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 1.5 sq mm PVC insulated multisranded copper conductor cable as continuous earth wire complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP/DP 10A- 20 Amps with complete accessories complete all as specified and directed.

M&L for sub main wiring with two single core 4.0 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring including 4.0 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire in conceled in wall of make & matching the existing surface make & matching the existing surface and making good to the disturbed surfaces to match the existing surfaces complete including taking down existing unserviceable submain of any size complete all as specified and directed. Note:- Two runs of 4.0 sqmm copper conductor cable, one run of 4 sqmm copper conductor and one run of PVC conduit will be measured as one unit.

S&F Ding Dong bell AC, 240 volts single pole complete all as specified and directed.

S&F ceiling rose surface bakelite two to three terminal complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F Modular switch 1 way 6A, 240 volts 1 module complete all as specified and directed.

S&F Modular switch 2 way 6A, 240 volts 1 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 240 volts 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Fan step regulator, 120W, 240 volts 2 module complete all as specified and directed.

Supply and fixing Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F 15 Watt LED bulb, in white colour with maximum Lumen output (850 lm) and colour temp 3000 K, complete all as specified and directed.

S&F LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x7W/1X9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down Energy meter/Main Switches of any size after disconnecting supply and kept in safe custody, taking down & remove the old wooden meter box from site, plastering the existing disturbed wall surface including colour wash and refixing the Meter/Main Switches again on new MS Box (sintex box) of required size for complete for 01 TPN DB and four electric meter as per site with connection complete all as specified and directed.

Taking down MCB DBs including MCBs of all sizes after disconnecting supply complete all as specified and directed.

S&F sheet metal enclosure MCB DB 4 way tripple pole and neutral 415 volts factory made double door flush type complete all as specified and directed.

S&F sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 8 way 200 Amps rated bus bar to be fixed with wall all accessories complete all as specified and directed.

S&F MCB single pole 240 volts 6 to 32 Amps complete all as specified and directed.

S&F MCB double pole 240 volts 16 to 40 Amps complete all as specified and directed.

S&F MCB TPN 63 Amp 415 Volts complete all as specified and directed.

Earthing complete with glavanised steel earth plate elactrode 600x600x6.0 mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground leves) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 complete all as specified and directed. Note:- (i) Item of earthing includes cost of excavation, removing, PCC Chamber, 15mm bore medium grade GI protection Pipe (7.5 Meters long) for earth lead . (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of Engr-in Charge.

S&F LED Bldg/street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and GI pipe 40 mm dia, light grade for mounting bracket bent to shape 1.50 RM and fixing arrangement with two Nos of MS clamps set, nut bolts, washers of suitable size complete all as specified and directed.

M&L in replacement of 1100 volts grade heavy duty XLPE cable of size 25 Sqmm 3.5 core, passing through GI pipe with aluminium conductor stranded polyethylene insulated, conductor served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete including taking down existing unserviceable UG cable of any type and size complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out for foundation of pole, laying under ground cables etc and getting out omplete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' modular size laid across the cable complete all as specified and directed.

Returning filling in with the earth obtained from above item including spreading, levelling, watering and well ramming in layers and not exceeding 25 cm in layer complete all as specified and directed.

M&L for GI pipe light grade 50mm dia bore with all fittings and fixed complete to wall, to pole or laid in trenches and road crossing complete including taking down unserviceable GI pipe of any size complete all as specified and directed.

PROVN OF SHED FOR CLEANING/ MAINT OF GUN (SIZE OF SHED 27MX 9MX HT 4M) IN EQPT DIV AT TECH AREA TAKU CPE ITARSI (RESTRICTED AREA)

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in sof/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exe 25 cm complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 using 40 mm graded stoine aggregate as in foundation filling and mass concreting complete all as specified and directed.

M&L for reinforced cement concrete M-25 Design mix as in foundation including raft, footings, basement slab and mass concrete complete all as specified and directed.

M&L for form work to sides of concrete foundation,footing bases of columns raft and similar work vertical or to batter for rough finished curved surface complete all as specified and directed.

M&L for reinforced cement concrete M-25 Design mix as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions, Square, for rough finished Square,rectangular surface etc complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over cut to shape required including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 143.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, braces, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E- 250) quality-A complete all as specified and directed.

S&F Plate girder or single stanchions post, built up of one beam or channel section with flange plates or tubular posts, caps, bases, splices, angle brackets, cleats and other connections Fe 410-W ( GdeE- 250) quality-A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (GdeE- 250) quality-A complete all as specified and as directed .

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of length n.exc 5 cm and 5 to 10mm dia of neck complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamal paint over a coat of red oxide primer on surface of any description over 10cm widht or girth complete all specified and directed.

Excavating over areas, under floor n exc 1.5m deep and getting out in soft/loose soil below floor complete all as specified and directed.

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for hardcore broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 150mm thick cement concrete type B1,1:2:4 (using 20 mm graded stone aggregate) laid in floor in panel size not execeeding 3 Sqm including making 10mm thick joint, joint shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen and 3 parts sand), finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for brick work with modular size sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for two coats of white wash on newly plastered surfaces of wall including preparation of surfaces all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 53496.00

M/s Prayag Construction

Dashmesh Enterprises

TANUJ CONST. CO.

M/S Ramesh Chandra Agrawal

R K Sales