Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹46.4 L+₹1.9 L (4.38%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹49.1 L+₹4.7 L (10.7%)Rejected-Finance 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹55.1 L+₹10.7 L (24.0%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
26 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari PIN 180003
WELCOME MAINTNANCE TO OFFICERS MD ACCN AT SATWARI OFFICERS ENCLAVE UNDER AGE BR II OF GE SATWARI
2024_MES_644357_1
GEJM-90/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Satwari
Class D Cat a(i)
9 documents required · 9 mandatory
₹500
Yes
GE Satwari
₹98,000
Yes
10 Sept 2024
27 Feb 2024
28 Mar 2024
28 Feb 2024
26 Mar 2024
13 Mar 2024
28 Feb 2024 - 13 Mar 2024
Amount
Note : (1). Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. (2). The contractor shall get approved by Engineer In Charge srapping and preparation of surfaces (both internal and external) of the buildings as a stage before carring out periodical services.
M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with dustfree sand paper mechanised scrapper as per paint manufacturer specifications and applying one coat of premium emulsion distemper on old decorated wall surface and necessary filling of wall care putty on uneven surface as and where required all as directed by Engineer-In-Charge.
M & L for preparation of old decorated plastered /concrete surfaces of walls, including complete removal of existing treatment & rubbing with dustfree sand paper mechanised scrapper and applying two coats of oil emulsion distemper over coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M & L for preparation of old decorated plastered /concrete surfaces of walls, including complete removal of existing treatment & rubbing with dustfree sand paper and applying two coats of oil emulsion distemper as in ceiling complete all as specified.
M & L for preparation of old decorated plastered /concrete surfaces of walls, and applying one coat of oil emulsion distemper as in ceiling complete all as specified.
M & L for preparation of old decorated plastered /concrete surfaces of walls, and applying one coat of white wash as in ceiling complete all as specified.
M & L for preparation of old decorated plastered /concrete surfaces of walls, and applying one coat of white wash as in walls complete all as specified.
M L for preparation to achieve smooth and even surface of new plastered surfaces of walls/ceiling, & applying two coats of oil emulsion distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.(Note:- Distemper to be painted with paint roller.)
M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces complete all as specified.
M & L for preparation to achieve smooth and even surface of new plastered/ concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
M&L for preparation of old/new decorated plastered/concrete surfaces , including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls,chajja,facia,face of columns,beams etc and applying one coat of weather proof exterior emulsion making good uneven surface/holes with wall care putty coloured in same shade where ever required. etc (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-In-Charge.
M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation, grinding of uneven surface wood and necessary filling by putty ( up to 4th storey with necessary scaffolding) as and where requered to make surface even and smooth.
M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper or grinding by hand grinder to make surface even and smooth and applying primer where requred ( up to 4th storey with necessary scaffolding) complete all as specified (Note:- Paint to be done with different tint wherever required as directed by Engr-in Charge).
M&L for applying two coat of synthetic enamel paint on new wood surfaces over one coat of pink primer of any description having width/girth exceeding 10 cm complete all as specified including preparation, grinding of uneven wooden surface and necessary filling by putty ( up to 4th storey with necessary scaffolding) as and where requered to make surface even and smooth complete all as specified
M&L for applying two coat of synthetic enamel paint on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper or grinding by hand grinder to make surface even and smooth and applying primer where requred ( up to 4th storey with necessary scaffolding) complete all as specified
Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified Such as NP-02,P-101,T-104
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified. Note :- Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.
M&L for brick work in cement mortar 1: 4, using sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall all as specified and directed by Engr- in charge
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge
Rendering 15mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.
Rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Grubbing up tree ,vegetation ,(up to 4th storey with necessary scaffolding) , in portion of roof slab, digging out roots, filling holes with cement mortar 1:3 and leveling off slab, and removing of unserviceable material to a distance exc. 100 m and not exc 500 mtr , all as specified .
M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 incl necessary forwork and rendering 10-15mm thick in CM 1:3 as per site requirement without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site complete all as specified and as directed.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings brackets, end ball, wall to wall bracket etc)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Dismantling stone slab and tiles of any description laid bedded and pointed in any mortar all as specified.
M & L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)
Material and labour Vitrified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4. Make Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Description all as item No 30 above but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.
M& L Virified Ceramic (double charged) any shade tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm with spacers in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in C:M 1:4. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room) Note:- If engr-in charge ordered to flooring to be done with spacer and grout with sealant, than spacer and sealant shall be measured and paid seperately to respective items.)
-ditto- as per item No 33 Above but as in verical surfaces dado/skirting over a backing coat of CM 1:4,10 mm thick complete etc.
S&F for placing the spacer on virtified tile flooring/vertical surfaces and the gap to be filled with silicon sealant all as specified and as directed engr in charge.(Note:- Area to be measured flat).
M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed CM 1:4. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)
-ditto- as per item No. 35 but as in verical surfaces skirting over a backing coat of CM 1:4,10 mm thick complete etc.
M&L 16 to 18 mm thick Granite black work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
M&L for cement concrete 75 mm thick as in sub base of floors (1:4:8), type D-2 40 mm graded stone aggregate all as specified.
M&L for 40 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in floor finishes/plinth protection and similar works, finished with even and smooth without using extra cement all as specified.
Material and labour for Chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified.
Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.
Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.
S&F Galvanised steel tubes, 15 mm bore, medium grade with bitumin coating complete all as specified. Make:- Parkas Surya, Jindal
S&F Galvanised steel tubes, 20 mm bore, medium grade with bitumin coating complete all as specified. Make:- Parkas Surya, Jindal
S&F in repairs Vitreous china Orissa pattern white of size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including cement concrete bedding (Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Hindware , Jaquar
S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) size 565 x 360 x 395 mm ,white complete including ‘P’ or ‘S’ trap , white seat cover with flat bottom and MS CP hinging device etc, complete, all as specified fixed in repairs. (Rate of including in taking out and removal of old EWC unhygienic condition) Make:- Cera Cat No: CAMELIA 2836 or equivalent in Hindware, Jaquar
S&F in repair 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC), complete all as specified. Make:- Prayag, Cera, Hindware.
S&F in repair self suction Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified. Make :- Cera, Cat No- S1013105 or equivalent in Cera/Hindware.
S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified. Make :- Jaquar Cat No ALD-573 or equivalent in Cera, Hindware
S&F in repair Bib Cock with Wall Flange cast copper alloy, chromium plated screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar Cat No : CQT-23047 or equivalent in Cera, Hindware
S&F in repair Bib Cock long body , with Wall Flange cast copper alloy, chromium plated screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar Cat No CON-107KN or equivalent in Cera, Hindware
S&F in repair angular stop cock with wall flange , cast copper alloy, chromium plated screwed with wall flange sutable for 15 mm iron pipe, complete all as specified. Make:- Jaquar Cat No CQT-23059 or equivalent in Cera, Hindware
S&F in repair Wall Hung Basin with Fixing Accessories Set, Size : 550mmx400, including cuppling and pvc waste pipe complete all as specified. Make :- Cera Cat No: 1008 or equivalent in Jaquar, Hindware.
S&F in repair Table top wash hand basin with fixing accessories set, not less than size: 600 x 480x150 mm, rectangular shape, including CP cupling and PVC waste pipe complete all as specified.
S&F in repair Pillar Cock tall body hot and cold suitable for table top basin with 450mm Long Braided Hose fancy type complete all as specified. Make:- Jaguar Cat No DRC-37001 or equivalent in Cera, Hindware.
S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified. Make:- Jaguar Cat No : CON-167KNB or equivalent in Cera, Hindware.
Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling .Make: Prayag or equivalent in Cera, Hindware
Supply and fixing PVC Seat cover for EWC pan (White ) of standard quality including hinges bolt etc all as directed by Engr-In-Carge.Make: CERA or equivalent in Jaquar,Hindware
S&F in repair stainless steel gratings 100 mm dia hole/with out hole as per site all as specified and as directed.
S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag or equivalent in Essco/Jaquar.
S&F in repair Wall Mixer Non-Telephonic Shower Arrangement with connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar Jaquar Cat No CQT-23219 or equivalent in Cera, Hindware
S&F in repair Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union Make :- Jainko,Essco,Parko, Prayag
S&F in repair Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified. Make:- Jaquar Cat No CON-347KNM or equivalent in Cera, Hindware
S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar Cat No : CON-309KNM or equivalent in Cera, Hindware
S&F in repair brass Chromium plated, single towel rail 600mm long complete all as specified. Make:- Jaquar or equivalent in Cera, Hindware.
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat or equivalent in Cera, Hindware
S&F in repair Glass shelf 600mm long, complete all as specified. Make:- Jaquar or equivalent in Cera, Hindware.
S&F in repair soap dish holder complete all as specified. Make:- Jaquar or equivalent in Cera, Hindware.
S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified. Make:- Jaquar Cat No : CQT-23083K or equivalent in Cera, Hindware
Supply and fixing in repair sink without drain board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size not less than 600mm x 450mm x 160mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Prayag or equivalent in Nirali, Jayana.
S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (39"x30"x10") fixed with steel fastners or steel screw complete. Make:- Jainko, Model No.KRJ-4. and equivalent in Prayag, Nirali, Jayana.
Disconnecting of water tank of exc 500 n.exc 1000 ltr capacity setting aside (or lowering if required) cleaning and removing all scale and dirt etc etc from tanks and from mouths of pipes etc. scrapping silt, scale, fungus with wire brush from water tanks and removing all scale and dirt etc from water tanks and removing water to a distance 50 meters from the building, cleaning the tank with fresh water, cleaning the mouth oh pipe, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks and float valves and marking the date of cleaning with white paint on tanks for, cleaning and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.
Dismantling water tanks and removing to store of water storage tanks (Cap. 500 ltr to 1000 ltr ) complete all as specified and directed by Engineer-in-charge.
Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity, (cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified. Make : Vectus Safe, Sintex Pure,Sheetal suraksha Plus .
Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity, (cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified. Make : Vectus Safe, Sintex Pure,Sheetal suraksha Plus .
Framed work such as grills grating etc with ends of bars shouldered and riveted or forged into spikes framed balusters, walkways, railings frame work of water tank and similar work conforming to Fe 290 Gde E-165.
Supply and fixing in repair float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings) (Min weight 210gm). Make: Prayag, Sintex or equivalent
Supply and fixing in repair float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 25mm. ( including necessary fittings) (Min weight 210gm). Make: Prayag, Sintex or equivalent
S&F in repair Ball valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
S&F in repair Ball valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.
Taking down shutters of any description exc 2.00 Sqm and n exc 4.00 sqm each, all as specified & directed.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
S & F pressed steel frames( factory made) made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd. Make:- Shivam Steel, Jammu
S & F pressed steel frames( factory made) made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd. Make:- Shivam Steel, Jammu
S&F in repair Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri Plastiwood, Sintex
M&L 35 mm thick 2nd class hard wood plain framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BRW ply including wooden beads on both sides. The size of rail and stile as per IS-1003 part-I kiln seasoned and chemically pressure treated.
S&F 35mm thick 2nd class hard wood, glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.
S&F Flush shutters, 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
S & Fin Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification. Make:- RajShri Plastiwood/ Sintex
S&F in repair Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and as directed.
S & F mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified. (ISI Marked)
S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. ( ISI Marked)
S&F in Aluminium handles, size 150 mm, cast type, anodised complete all as specified. (ISI Marked)
S&F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
Supply and fixing for stainless steel medium weight Butt hinges, 100mm , complete all as specified and as directed
S & F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)
Material & labour steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.
S&F in repair for Aluminum Powder coated window and ventilator shutters, Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements etc. complete and provision of space for exhaust fan (If required as per direction by Engr in Charge) including finished disturbed the area even and fair cement mortar (1:3) incl applying 1 to 2 mm thick putty and two coats OBD all as specified and as directed.
S&F for Aluminium powder coated grill (spacing 50mmx50mm) (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge
S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones ( up to 4th storey with necessary scaffolding) complete all as specified and directed.
S&F in Sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including pins/clips/beading (up to 4th storey with necessary scaffolding) complete all as specified.Make : Saint Gobain
S&F Figured glass, 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including pins/clips/beading (up to 4th storey with necessary scaffolding) complete all as specified. Make : Saint Gobain
Supply and fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-In-Charge.
Taking down chowkats with shutters of kitchen cabinets of any description n exc 1.00 Sqm each and removing from the site all as specified & directed.
M&L for glossy finish prelaminated 18mm(+0.7mm) thick celuka glossy finish PVC foam ply of density 600Kg/cbm. One side prelam and other side plain18mm thick Celuka PVC ply for kitchen cabinet shutter/War drobe.(Colour as directed by ENGR-in-CHARGE) all as specified and colour as directed by Engr-in-Charge/GE.
M&L for plain 18mm (+0.7mm) thick celuka mate finish PVC foam ply of density 600Kg/cbm. Celuka PVC ply for kitchen cabinet shutter/War drobe.(Colour as directed by ENGR-in-CHARGE) all as specified and colour as directed by Engr-in-Charge/GE.
S&F for PVC edge banding tape 0.50 mm thick 18 mm wide fixed with resin/hot pressed all as specified and as directed. (Colour all as directed by Engr-in-Charge).
Material & labour for 6 mm thick PVC Celuka board plain , as in kitchen cup board shutters/shelves etc any colour complete all as specified and Approved by GE.
S&F in repair continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)
S&F steel fasteners of size 75mm long drilled and fixed to walls
S&F 50mm dia and 75mm long steel supports fixed with bolt at bottom of cupboards box all as specified
S&F stainless steel designer handles ( heavy type ) 100 mm size fixed in drawers or shutters as in cupboards, as approved by GE.
S&F stainless steel designer handles ( heavy type ) 150 mm size fixed in drawers or shutters as in cupboards, as approved by GE.
S&F in repair magnet door catcher for cupboard shutters complete all as specified. (ISI marked)
S&F in repair brass leg suitable for wall mixer complete all as specified.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. ( ISI Marked)
Demolition of cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises.
Demolition of reinforced cement concrete of any discription and as in RCC water tank ground to 4th floors and removing the rubbish from the work site out side defence premises complete all as specified.
M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rogh finished surfaces of concrete, complete all as specified and directed.
M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed
Cutting holes into or through cement concrete slabs,Granite, chajjas, etc. reinforced or otherwise, area n exc 100 Sqcm all as specified and as directed.
Rendering 15mm thck in CM 1:3 as in sunken floors/roof finish without using extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)
M&L applying a coat of bituminous primer conforming to IS-3384 @ 0.5 Kg/ sqm on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 82/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface.
M&L for plain cement concrete type B-1, (12.5 mm graded stone aggregate) as in sub base/floor finish/roof padding and other similar works all as specified and as directed.
M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan filling and mass concrete complete all as specified and directed by Emgr-in-charge.
M&L 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.
Supply only Liquid water proofing compound complete all as specified and as directed.
Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC (SWR) branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.
Supply and fixing, UPVC (SWR) branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.Make -Astral,Supreme, Finolex
S&F in repair PVC (SWR) Type-B vent cowl 75 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.
S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.Make -Astral,Supreme, Finolex
Providing and injecting chemical emulsion not less than 30 cm interval for Post Constructional Antitermite Treatment along internal wall using chemical emulsion at the rate of 2.25 litres per RM of the vertical surface of the sub-structure to a depth of 300mm including re-filling the hole with white cement and cleaning the disturbed surfaces complete all as specified. (Contractor shall be deploy authorised pest control company and submit the guarantee period of 5 yeras).
Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.
M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH-PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH-PVC insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI modular sunken boxes including white cover plate with frame as per relevant IS for mounting moudlar switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One light/ fan point/exhaust fan point controlled by one way switch 6 Amps.
All as per Srl item No 154 above but One 3 pin Socket outlet 6A point on same board.
All as per Srl item No 154 above but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.
S & F moudlar switch piano flush button single pole one way, 6 Amp,1 moudle. Complete all as specified and directed. 240 V
Supply and fix moudlar Socket outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.
Supply and fix moudlar Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as di rected.
Supply and fix moudlar Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and as directed by Engineer-In-Charge.
M/S SINGH CONSTRUCTION AND WORKS
NARESH KUMAR AND COMPANY
HANS ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .