ADDN/ALTN OF OFFRS TOILET IN BLDG NO P-19 OF 561 SUB GP (ASCON), PROVN OF PLINTH AND RAMP FOR DISPOSAL OF GARBAGE NEAR MAP OR ACCN AND PROVN OF ACS AND ADDN ALTN TO EXTERNAL ELECTRIFICATION FOR BLDG NO O-4 AT FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

Surface excavation n.exc 30 Cm deep and getting out in Soft/loose Soils, Complete all as specified and directed by Eng-in-Charge.

Excavating in Over Areas n exc 1.5 m deep and getting out in soft/loose soils, complete all as specified and directed by Eng-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable etc., n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soils, complete all as specified and directed.

Excavation of trench in road/hardstanding etc, not exc 1.50 m wide and not exc 1.50 m deep and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm in soft/loose soils, complete all as specified and directed.

Removal of excavated material to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Removing excavated materials exc 50 m, but n.exc 250m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.

M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 Cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregates) in foundation filling and mass concrete complete all as specified and directed.

M&L for M-25 nominal mix RCC (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in foundations, rafts, footings, foundation beams, plinth beams, base of columns, basement of slabs, underreamed piles and mass concrete etc., complete all as specified and as directed.

M&L for M-25 nominal mix RCC (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.

M&L for M-25 nominal mix RCC (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumbers, lintels, over 1.50m span etc., complete all as specified and as directed.

M&L for M-25 nominal mix RCC (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams, columns in floors, roofs, landings, balcones, canopies, duck slabs, shelves and like etc., complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any) for foundation and plinth beams etc, vertical or to batter for rough finished surfaces complete all as specified and directed.

Use and waste of formwork to side of pillars, posts, struts, piers, columns for fair finished surfaces complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for fair finished surfaces complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed .

M&L for mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.

M&L for mild steel TMT Bars 6-8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed .

M&L for Rolled mild steel ornamental and intricate framed work, Fe 410W (Gde E-250) quality A, as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls finished even & smooth (without using extra cement) and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately).

Supply only liquid water proofing compound all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces walls in cement mortar 1:4 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick cement plaster on ceiling surfaces finishing even and smooth without using extra cement in cement mortar (1:3) including necessary scaffolding at any height, complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, mass concrete etc., complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in foothpath, floors, hardstanding etc., complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 Kg/per square centimeter using non circular triangular synthetic fibre recron 3S of 12mm size @ 0.25% of weight of cement and in field using 400 Kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as per specified and directed Note : (i) Nothing to be paid over and above 400 kg/cum (ii) Non Circular synthetic fibre shall be measured and paid separately

S&F 150 micron thick polyhene film in a layer laid on ground complete all as specified and directed (Note: Net measurement shall be measured without any allowance of overlaps)

Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed.

Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as Specified and as directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as Specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50 mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

M&L for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F 100mm butt hinges stainless steel medium weight complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium handles, cast type, anodised, 150 mm complete all as specified and directed.

M&L for preparation of new surfaces of Ceilings including cleaning, watering to make the surface clean and free from dust and applying two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old treated/decorated surfaces of walls (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) and applying one coat of acrylic distemper, finished with rollers, complete all as specified and directed.

All as per item No.45 above, but on Ceilings.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion weather proof paint over a coat of primer to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc all as specified and as directed by the Engineer-in-Charge.

S&F non-skid ceramic coloured tiles (square/ rectangular), 7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 300 X 450 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M&L for 50mm Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) as in sub base for floors, finishing cement concrete surface even and fair, complete all as specified and directed.

M&L for applying two coats of master seal 550 or equivalent to prevent leakage/seepage through sunken floor over prepared surface, complete all as specified and directed.

M&L for Coloured granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

Taking up or down existing 15mm dia steel tubing and connection and keeping aside for re-fixing or removal to store complete all as specified and directed

Supplying, fixing, jointing and testing 15mm dia galvanised iron tube, medium grade with all fitting such as union, sockets, tee, angle etc., complete fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Supply and fixing 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed. (Note : Earthwork to be measured and paid separately).

S & F CI bend (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

S&F 100mm dia CI sanitary connection socket to fit WC outlet, complete all as specified and directed.

M&L for 100 mm dia cast iron Floor trap / Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

S&F in repair 15mm bore heavy duty PVC connector pipe of length 450 mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON / CERA)

S&F Vitreous china, white, full stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CAPRIANA / HINDWARE, Model: FLAT BACK LARGE / Jaquar, Cat No: URS-WHT-13261, PARRYWARE, Model: NEW MAGNUM)

S&F in repair vitreous China wall mounted coupled closet (Pedestal pattern), white, including low level vitreous China valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC white soft close seat cover and connecting fittings complete all as specified and directed. (Make :PARRYWARE, Model: CASCADE NXT (Cat No.C0208, E8299 & C0771) or Equivalent in JAQUAR/ CERA / HINDWARE)

S&F in repair Vitreous China table top Wash Basin 420 x 420 x 135 mm in size, White with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. (MAKE : JAQUAR, Cat No: ARS-39901 or equivalent model in KOHLAR / PARRYWARE)

S&F swan neck pillar cock 15mm dia chromium plated cast copper alloy with round spout, sink mounted type, screwed for iron pipe etc complete all as directed (MAKE :PARRYWARE, Cat No : G4803A1 / CERA, Cat No: F1003104 / PRAYAG, Cat No : 9014/ HINDWARE, Cat No: F280012 / JAQUAR, Cat No: SOL-6357)

S&F soap dish, chromium plated body complete all as specified and directed. (Make: JAQUAR, Cat No.AKP3575P/PRAYAG, Cat No: BA-45 / CERA, Cat No: F5003106 / ESS ESS, Cat No : AC-503B / PARRYWARE, Cat No: T6902A1)

S&F Toilet paper holder of chromium plated body complete all as specified and directed. (Make: JAQUAR, Cat No.AKP35751P or Equivalent in PRAYAG / CERA / PARRYWARE)

S&F Towel ring fancy type, chromium plated ,complete all as specified and directed. (Make: JAQUAR, Cat No.AKP35721P or Equivalent in PRAYAG / CERA / PARRYWARE)

S&F Towel rack fancy type with lower flanges, stainless steel, complete all as specified and directed. (Make: JAQUAR, Cat No.AKP35781P or Equivalent in PRAYAG / CERA / PARRYWARE)

S&F 15mm bore Two-in-one bib cock, fancy type (Kubix) with wall flange, complete all as specified and as directed. (MAKE : JAQUAR, Cat No: KUP35041 or equivalent model in KOHLAR / PARRYWARE)

S&F Chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 /CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002 / PRAYAG, Cat No: 452)

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, cat No: BEA-26)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: KUP-35053PM / PARRYWARE, Cat No: T3097A1 / CERA, Cat No: F1005201 / PRAYAG, Cat No: 9410 / HINDWARE, Cat No: 320006 )

S&F in repair corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A)

S&F brass chromium plated grating of size 102mm dia with waste hole, fixed with white cement complete all as directed. (Make : PRAYAG, Cat No : FT-04 or equivalent make as approved by GE)

S&F 600mm x 450 mm mirror with PVC frame and fixed to wooden plugs with chromium plated brass screw and cup washers, as in repairs, complete all as specified and directed. (Make: PRAYAG, Cat No: 553 or equivalent model in other makes specified in CA)

S&F 615mm bore auto closing concealed urinal flush valve with wall flange, fancy type chromium plated, as in repairs, complete all as specified and directed. (Make: JAQUAR, Cat No: PRS-073 or equivalent model in other makes specified in CA)

SCHEDULE 'A' PART-II (AC WORKS) Supply, installation, testing and commissioning of 3 phase, 415 Volts, Air Cooled Vertical Type Air Conditioner, minimum 3.0 TR capacity, energy efficient with minimum 3 star rating, with indoor and outdoor units, cordless remote control, scroll type compressor and other standard accessories complete all as specified and directed. (MAKE: DAIKIN, Model No: FVRN100AXV16 (Indoor Unit) & RR100DGXY16 (Outdoor Unit) / HITACHI, Model No: FVQN100AXV1 (Indoor Unit) & RQ100DGXY1 (Outdoor Unit) or equivalent model in O-GGENERAL/CARRIER / BLUE STAR) (NOTES : 1. AC refrigerant should be Non CFC. 2. Copper pipes beyond the standard length supplied by manufacturer alongwith the ACs shall be measured and paid separately)

Supply, installation and testing inverter split AC units indoor/outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 star rating, copper condenser, copper coil and EER 3.2 of capacity 2.0 TR including 2.5 Sqmm 4 core flex copper cable connection from indoor to outdoor unit as per site requirement and refrigerant line copper tubing of suitable sizes including foam insulation upto 5m long, 2 Nos powder coated angle iron bracket, nuts, bolts etc for AC outdoor unit including making holes of required dia on walls and necessary masonry work for making good distributed surface and match with the existing colour complete all as specified. "Make: Daikin, Model No. FTKR60UV16U/V/ Hitachi, Model No. RMOG 524HCEAGOLD/ O-General, Model No. ASGG24CGTA" Note:- Copper pipe, insulation and connecting cable, angle iron bracket shall be measured and paid separately under respective item.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed single core multistranded copper conductor of nominal cross sectional area 6.0 Sqmm alongwith one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor of nominal cross sectional area 6.0 Sqmm as earth continuity conductor drawn through and incl PVC casing-capping of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 6.0 Sqmm cable & one run of PVC casing capping shall be measured as one unit)

M&L for sub main wiring with 4 run of FRLS PVC insulated & unsheathed single core multistranded copper conductor of nominal cross sectional area 10.0 Sqmm alongwith one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor of nominal cross sectional area 10.0 Sqmm as earth continuity conductor drawn through and incl PVC casing-capping of suitable size, surface type complete all as specified and directed. (NOTE : Five runs of single core 6.0 Sqmm cable & one run of PVC casing capping shall be measured as one unit)

Supply and fixing refrigerant line suction copper tubing of size 5/8" with clamping on wall surface or concealed with both ends connections complete all as specified and directed. (NOTE: Measurement shall be taken for pipes beyond the standard length of pipe supplied with AC)

All as per item No.87 above, but discharge copper tubing of size 3/8". (NOTE: Measurement shall be taken for pipes beyond the standard length of pipe supplied with AC)

Supply and fix discharge copper pipe line heavy duty 1/4" dia and flair nuts from indoor to outdoor unit of split AC 1.5 TR/ 2 TR capacity all as specified and directed.

S&F nitrite rubber insulation for copper tubing of dia 5/8" complete all as specified and directed.

S&F nitrite rubber insulation for copper tubing of dia 3/8" complete all as specified and directed.

S&F nitrite rubber insulation for copper tubing of dia 1/4" complete all as specified and directed.

S&F drain pipe 5/8" dia PVC jacketed heavy duty with fixing of clamp complete all as specified and directed.

Supply and fix PVC pipe nylon imbraided 15 mm dia for condenser water drain fitted with clamps/ concealed in wall all as specified and directed.

S&F PVC insulated and PVC round sheathed copper conductor (flexible) industrial cable, (FRLSH) 1100 Volts, conforming to IS 694 of size 2.5 Sqmm 4 core connecting electrical equipment with terminal lugs/ clips as per site requirement, complete all as specified and as directed.

S&F mild steel angle iron brackets, bracings, supports, clamps, straps, D-clamps, back plates and MS frames fabricated from structural steel sections, such as MS channel, angle iron and flats of suitable size etc including nuts, bolts, washers, eye hooks, welding, bending cold or hot, drilling holes for bolts in any shape or size including applying two coats of synthetic enamel paint over a coat of res oxide primer complete all as specified and directed.

S&F SPN DB, IP 43 protection, double door, 240 volts, 4 way complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / HAGER, Cat No: VYS04D / LEGRAND, Cat No: 5076 10) NOTES :-(1) MCB shall be measured and paid separately. (2) DB & MCB shall be of the same manufacturer.

S&F MCB, 'C' series, 4 Pole, 40 Amps, breaking capacity 10KA complete all as specified and directed.

S&F AC outdoor metallic stand compatible for fixing out door unit in walls/ floors as per site requirement complete all as specified and as directed.

S&F PVC cable trays with cover of size 75mm x 75mm on walls/ ceilings as per site requirement for proper fixing of copper pipe with insulation alongwith fittings and fixtures arrangement complete all as specified and directed.

SCHEDULE 'A' PART-III (EXTERNAL ELECTRIFICATION WORKS) M&L for dry sand cushioning/sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed. NOTE: Punned thickness only shall be measured for payment)

Supply and laying bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed.

Supply, Laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable of size 70 Sqmm x 3.5 Core,1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole complete all as directed. (Note : Necessary earth work to be measured and paid separately under respective item.

S&F PVC insulated multistranded copper conductor wire, 1.5 Sqmm 3 Core, round flexible for connection of light fittings, complete all as specified and as directed.

Supply, lay and testing LT Cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded copper conductor of cross sectional area 6 Sqmm x 2 Core, 1100 Volts, laid in trenches, or fixed on walls/passing through pipe/poles, complete all as specified and directed.

Supply and fixing of Rigid non-metallic PVC conduit 20mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed.

S&F 50 mm bore galvanized iron pipe (light grade) with all fittings, fixed complete to wall / ceiling or laid in floor or fixed along pole for cable/earth strip protection with proper size clamps, nuts & bolts for fixing lightning conductors complete all as specified and directed.

Supply and fixing cable Junction box of size 110 mm x 110mm x 67mm weather proof, IP 65 for outdoor installation including 05 Nos terminals fixing on wall with suitable size anchor bolt etc. with MCB SP, 6 Amps, 240 volts, 50 Hz - 01 No. as in repairs, complete all as specified and directed. Make: CAPE Cat Pt No. 806 407 01 or equivalent in HENSEL/ SPELSBERG/ RITTAL/ SCHNEIDER

S&F LED Flood Light fitting 70 Watts, of various capacity as mentioned under, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and toughened glass cover, IP66 grade ingress protection, impact resistance IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation

S&F LED flexi strip of 100 m length, IP 65, 5watt/metre, any colour including suitable driver and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (MAKE : MAGIK, Model: Stream LED Strip Light or equivalent model in other makes specified in tender)

M&L for Glow Sign Board of size 3700 x 250 x 130mm made of angle iron frame work as per site requirement with front side covered with 2mm thick acrylic sheet for writing letters in appropriate font size and other sides covered with 0.63 mm thick GI Sheet, duly prewired and including LED tube light 18 Watt (Nos Job of LED Light as per site requirement) inside the board incl necessary electrical connection from glow sign board to near Switch board/PVC Junction Box with PVC Copper Cable 1.5 Sqmm 3 core inside the PVC conduit Rigid/ Flexible as per site requirement and Board fixed to the angle iron frame incl, necessary fixing arrangement such as angle iron, flat iron & channel complete all as specified and directed by Enr-in-Charge. Note:- (a) Data to be written on Glow Sign Board will be directed by Engr-in-Charge. (b) Angle Iron, Channels, Flat Iron and other Iron work will be measured and paid separately.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 25 X 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil, complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

M&L for earth continuity conductor or main earthing lead fixed to wall or batten as recess and chases or burried on ground or drawn in conduit pipe fixed to poles or any indicated situation for loop earthing as required with 25 x 4 mm GI strips including dismantling of existing strip complete all as specified and directed.

Supply, installation, testing and commissioning of Eco friendly, Silent Generating Set Diesel Engine driven of capacity 62.5 KVA/ 50KW at 0.8 PF or nearest higher size, 415 Volts, AC, 3 Phase, 50 Hz 4 wire, directly coupled alternator (IS: 13364) and engine as per IS:1001/10002, water cooled, common base platform with inbuilt fuel tank with anti vibration pads/ damper as per manufacturing instruction and as directed by manufacture complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms, including necessary excavation, PCC foundation, the DG set to work at ambient conditions of Kolkata and produce specified out put, the de-rating factors, if any, to be taken into consideration while arriving the capacity to give specified out put, DG set to be factory assembled by the OEM of the engine manufacturer and all components to be accommodated in enclosure and other accessories comprising tools and accessories as required, complete all as specified and directed. Make: KIRLOSKAR GREEN / CUMMINS / ASHOK LEYLAND / GREAVES COTTON Note:- (a) The DG set should run for testing for a period of 12 hrs with artificial load in presence of IEM and the satisfactory report should be signed by the IEM before completion of work. (b) The necessary arrangement for testing of artificial load DHPP load test shall be born by the contractor and the quoted rate shall be deemed to be included in the DG Set.

AUTO ELECTRICALS

SUDHA ENTERPRISES

INDIA ELECTRICAL EQUIPMENTS

SRI BHOOMIJ INFRAPROJECTS & SERVICES LLP

ELECTRO FREEZE

MODERN AGENCY

M/S SRINIVASA CONSTRUCTION