Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 0.110₹27.6 LAccepted-AOC | 0.110 | Accepted-AOC Lowest Value | |
| 2 | 4.925₹29.0 LRejected-AOC | 4.925 | Rejected-AOC Highest Value |
Tender Value
₹33 L
EMD Value
₹33,000
Closing Date
20 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer
Thingalnagar Town Panchayat office
Renovation of Marshal Nesamony Park at Thingalnagar in Thingalnagar Town Panchayat
2023_DTP_399575_1
336/2023/A1-3
Open Tender
Civil Works
Works
180 days
Thingalnagar Town Panchayat
Vth and above
3 documents required · 3 mandatory
₹0
₹33,000
Thingalnagar Town Panchayat Office
29 Dec 2023
14 Dec 2023
20 Dec 2023
14 Dec 2023
20 Dec 2023
14 Dec 2023
14 Dec 2023
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24
Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36
Footing and plinth beam
For column Below GL
Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30
Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97
Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using country bricks of size 8¾"x4¼"x2¾" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.
Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61
Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification.
Painting two coats with ready mixed exterior emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.
Supplying and fixing M.S Grill to doors, special windows and ventilators etc using MS flats and rounds as directed by the departmental officers inclusive of cost of MS grill including one of red oxide and fixing in position etc. complete (as per the schedule of rate)
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.)
Dadooing the walls with plain glazed tiles of 150 x 150 x 6 mm set in cement mortar 1:2 (one part of cement two part of sand) 12 mm and pointing white cement used 4kg/m2 neatly etc complete as directed.
Cement concrete of mix 1:3:6 (one part of cement three part of sand and six part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification.
Paving floor with colour ceramic tiles of size 200 x 200 x 6 mm in all floors over the base layer of cement mortar 1:3 (one part of cement three part of sand) 20 mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special
Dadooing the walls with plain glazed tiles of 150 x 150 x 6 mm set in cement mortar 1:2 (one part of cement two part of sand) 12 mm and pointing white cement used 4kg/m2 neatly etc complete as directed.
Supply and fixing in position best quality of approved make Indian Water closet of size 580 x 440 mm with all accessories such as 'P' trap or 'S' trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40 mm leveling course 1:4:8 - 100 mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the disturbed potion to original condition without leakage etc including Labour charges for fixing etc complete.
Supplying and fixing in position of glazed water closet of size 58 cm with ‘P’ trap; and double flopped seat cover, 12.5 litres capacity PVC low level automatic flushing tank including all internal plated brown headed stopcock, 12 mm nylon connection with necessary teak wood plugs, clamps screws to the portion of coming with wall or floors, including dismantling masonry and redoing the same to the original condition.
Solid PVC door shutters using 19 gauge 19 mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5 mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings.
Supply and fixing in position best quality of approved make Wash hand basin of size 550 x 440 mm with all accessories such as cast iron brackets, including cost of 15 mm Ø brass nipple, 15 mm nylon connection etc including fixing the wash basin in the wall in position with a pair of CI brackets with TW plug and screws and giving necessary water supply connection and painting the brackets with two coats of paint over priming coat of anticorrosive paint including testing leakages etc, complete complying with standard specifications (the wash hand basin and the specials should be got approved by Departmental officer before use on works)
Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification.
Supply of interlocking paver block M40 grade bounding and laying of 80/83/60/63 mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40N/mm² in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including levelling the base preparation of sub base with cushion 100 mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading, unloading and laying interlocking paver block as per standard specification.
Supply and fixing of following children play equipments at park incluiding cost and conveyance of all materials and labour charges etc complete.
Supply and fixing of swing 2 seator with rubber seat A frame 1:5 galvanished B class pipe seats, rubber chain 8 mm stainless steel chain (grade 304) painting with PU coating product area 10ft x 9ft paly area 15 ft x 15ft
Supply and fixing of wave side 8ft FRP (component ladder galvanished B class pipe sliding chute 9ft BED LED galvanished C class pipe, height, 5ft, FRP thickness 4 mm (reinforced polymers in 5 year) 450 CSM matt, 600 roving mat, isotolic gel coat with PU pigment, painting with PU coating, width 2ft (required area) product area 2.5 ft x 12 ft
Supply and fixing of see- saw 4 seater FRP height 1.5 ft with 5ft, frame 1.5" galvanised B class pipe, see saw rail, 2" galvanished C class pipe, seat FRP seat with with 450 CSW mat 3 layer bonding, isotolic gel coat with UV pigment, painting with PU coating seat size 15 ft x 10 ft play area 8ft x 12 ft.
Supply and fixing of Merry go round - 6 seater (FRP) height 3" GI pipe, 2.5 mm thick, B class seat size 15" x 14" paint PU coating.
Supply and fixing of 4 m length single bracket pole with base plate (250 x 250 x 6mm) 76.10 mm x OD x 3.65 mm thick x 4000 mm length etc complete.
Supply of 25W LED street light fitting with LED etc complete. (SD533)
Earthing as per PWD standard spectification with on elctrode on 2 m class 'B' pipe of dia not less than 32 mm complete. Brass cable event for suitable armoured LTUG cable with earth connection of suitable of 4 x 16 sq.mm etc complete. (SD234)
Supply and erection of 4 x 6 sq.mm UG copper cable, including cost and conveyance of all materials to site and labour charges etc complete. (SD 201)
Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal with 40A 4 pole MCB isolator as incoming and 12 Nos. 6A to 32A SP MCB as out going in flush with valve and making good of the concealed portion with earth connection. The MCB DB, MCB Isolator and MCBs should be with ISI mark like Standard/ HPL / Havells / Indo Asian make. (SD179)
Supply and laying of 2 x 10 sq.mm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD198)
Construction of platform bench made of 100 mm to 80 mm thick single piece black granite slab 2 m long and 0.45 to 0.40 m wide chamfered machine polished on top and all sides and machine cut at bottom, supported on 2 Nos. of 100 mm to 80 mm thick black granite slabs of 0.50 x 0.45 to 0.40 m size with semi circular cuts at sides and fully polished on all sides above platform level placed vertically with 0.15 m buried in concrete 1:3:6 mix below platform surface, connecting the top slab and supports rigidly to correct line, level details as shown in the relevant sketch including demolition of cement concrete, earth work wherever necessary disposing all debris away from site with all leads and lifts etc. complete and as directed. (All labour, material, tools and plants including cement by contractor) (Quotation)
T. GEORGE STEPHEN
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .