REPAIR AND POLISHING TO WOODEN FURNITURE UNDER GE (AF) SRINAGAR.

Amount

Removing following old and unserviceable parts / components of “TABLE DINING 4 PERSON 1200x900x750mm Drg No FD/MAP-11/03” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18 mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete.

Leg of table.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table dining with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

Provn of PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE DINING 6 PERSON 1500x900x750mm, Drg No FD-273 (WOODEN)” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE DINING 8 PERSON, Drg No FD-273-WOODEN” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE CENTRE 900x450x400mm, Drg FD-274-WOODEN” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE PEG 450 x 300 x 380 mm, Drg No FD-384 - WOODEN” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TEAPOY WOODEN 600X450X540MM, Drg FD-282” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Teapoy top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of teapoy, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of teapoy as per drg and as directed by Engineer-in-Charge.

Short rail of the teapoy as per drg and as directed by Engineer-in-Charge.

Stiffner of teapoy wdn, complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the teapoy with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the teapoy to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE 900 x 600 x760mm Without drawer Wooden, Drg FD-284” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

Stiffner of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE 900 x600 x760mm With drawer wooden, Drg No FD-284” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Wooden drawer of the table of seasoned kail wood with knobs complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long rail of table as per drg and as directed by Engineer-in-Charge.

Short rail of the table as per drg and as directed by Engineer-in-Charge.

Stiffner of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden portion after repair of the table with one coat of existing colour and varnish as specified and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “Book Case Wooden, Drg No FD-237” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

S&F in replacement sunmica sheet 1.5 mm thick, teak shade to door side and top of Book case wooden including knob on drawer complete all as shown on drawing and as directed by Engineer-in-Charge.

Drawer of Book case wooden complete all as shown on drawing and as directed by Engineer-in-Charge.

Door of Book case wooden complete all as shown on drawing and as directed by Engineer-in-Charge.

Legs of Book case wooden complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden Portion after repair of the book case with existing colour and varnish as specified and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE DRESSING GENTS WITH MIRROR, Drg No FD-230, 231” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

S&F in replacement drawers of table dressing gents including knobs complete all as shown on drawing and as directed by Engineer-in-Charge.

Mirror including replacement of unserviceable beading of the mirror all around and replacement of 6mm plywood of the back side of the mirror, complete all as shown on drawing and as directed by Engineer-in-Charge.

Back side plywood of 6 mm thick of the table dressing gents complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F in replacement of Laminate 1 mm thickness, teak shade to the table dressing gents complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden Portion except sunmica portion after repair of the dressing table with existing colour and varnish as specified and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “HAT STAND WITH MIRROR Drg No FD-233” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Repair of Hat stand by replacement of teak face plywood 6 mm to the front and back side of the mirror all as shown on drawing and as directed by Engineer-in-Charge.

S&F in replacement of mirror of size 440 x 300 x 5.5 mm thick complete all as shown on drawing and as directed by Engineer-in-Charge.

4 Nos of Brass peg sets of size 120 x75 mm of Hat Stand all as shown on drawing and as directed by Engineer-in-Charge.

35 mm x 6 mm thick flat wooden beading all around the Hat Stand all as specified and all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing to the wooden portion after repair of the Hat stand with existing colour and varnish as specified and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES WITH MIRROR, Drg No FD-232 , 251” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Drawer of table dressing including knobs to be provided in the drawer complete all as shown on drawing and as directed by Engineer-in-Charge.

Mirror including replacement of unserviceable beading of the mirror all around and replacement of 6 mm plywood of the back side of the mirror, complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F in replacement of Laminate of 1 mm thickness, teak shade to the table dressing ladies complete all as shown on drawing and as directed by Engineer-in-Charge.

Back side plywood of 6 mm thick of the table dressing ladies complete all as shown on drawing and as directed by Engineer-in-Charge.

S&F in replacement sliding glass of size 300mmx300mmx5.5 mm with knobs for smooth sliding of glass shutters of the table dressing, complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing all the wooden Portion except sunmica portion after repair of the dressing table with existing colour and varnish as specified and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE WRITING 1145X600X760MM Drg No FD-275” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18 mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top complete all as shown on drawing and as directed by Engineer-in-Charge.

Drawer of table writing, complete all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table writing made of first grade seasoned teak wood as per drawing complete all as specified and directed by Engineer-in-Charge.

Stiffner made of first grade seasoned teak wood as per drawing complete all as specified and directed by Engineer-in-Charge.

Door of table writing with hinges complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing to table writing with one coat of existing colour and varnish after smoothing the surface complete all as specified and directed by Engineer-in-Charge.

Provn of PVC hard buffers shoes to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “BED PLY WOOD TOP AND BED HARD Drg No FD-246-247” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Legs, Kail wood free from knots complete all as specified and directed by Engineer-in-Charge.

Long rail with Kail wood complete all as specified and directed by Engineer-in-Charge.

Laboure only for conversation of long rail into short rail complete all as specified and directed by Engineer-in-Charge.

Plywood of head board with plywood of 4.0 mm thick with one side teak face covered with Kail beeding as per drawing complete all as specified and directed by Engineer-in-Charge.

Plywood of foot board with plywood of 4.0 mm thick with one side teak face covered with Kail beeding as per drawing complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of unserviceable supporting batten with Kail wood complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of batten of head board or footboard of Kail wood complete all as specified and directed by Engineer-in-Charge.

Plywood top 12 mm thick with both side commercial face complete all as specified and directed by Engineer-in-Charge.

M&L for Polishing to Bed with one coat of existing colour and varnish after smoothing the surface complete all as specified and directed by Engineer-in-Charge.

SOFA SET 4 SEATER (FD-281):- Supply only foam cushion of 40 density of size 555 x 530 x 100 mm covered with good quality of tapestry cloth (minimum rate Rs 350 / RM) of shade and colour/quality as approved by engineer-in-charge/ GE.

SOFA SET 5 SEATS SPL :- M&L for replacement of upholstery of sofa with tapestry cloth (minimum rate Rs 350 / RM) of shade and colour/quality as approved by engineer-in-charge/ GE.

SOFA SET 5 SEATER (FD-281):- Supply only of foam cushion of 40 density of size 555 x 530 x 100mm covered with good quality of tapestry cloth (minimum rate Rs 350 / RM) of shade and colour/quality as approved by engineer-in-charge/ GE,.

M&L for replacement of broken planks of seat & back with hard rail wood and side rail with soft wood as shown on drg complete as specified and directed by Engineer-in-charge.

Supply and replacement of cushion cover of existing sofa foam cushion for sofa set Minimum 350 Rs/ Mtr of shade and colour/quality as approved by engineer-in-charge/ GE. (size 555X 530X 100mm)

Removing following old and unserviceable parts / components of “TABLE COMPUTER Drg No FD/E6/ MAP /03 ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18 mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top duly polished complete all as shown on drawing and as directed by Engineer-in-Charge.

Drawer of table complete all as shown on drawing and as directed by Engineer-in-Charge.

Keyboard holder of table computer complete all as shown on drawing and as directed by Engineer-in-Charge.

Front railing of keyboard holder / drawer/ mouse stand of table computer, complete all as shown on drawing and as directed by Engineer-in-Charge.

PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE 900 x900 x760mm WOODEN Drg No FD-88” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18 mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top all as shown on drawing and as directed by Engineer-in-Charge.

Leg of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

Long Rails of table as per drg and as directed by Engineer-in-Charge.

Stiffner of table, complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing after repair of the table with existing colour and varnish as specified and as directed by Engineer-in-Charge.

Provn of PVC hard buffers to the legs of the table to make its balance complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for replacement of complete upholstery of SOFA CHAIRS SINGLE SEATER WITH & W/O ARM (Drg - Spl) with tapestry cloth (minimum Rs 350 / RM of shade and colour/quality as approved by engineer-in-charge / GE.

M&L for replacement of upholstery of SOFA SET 2 PERSONS Drg Spl with tapestry cloth (minimum Rs 350 / RM of shade and colour/quality as approved by engineer-in-charge/ GE.

Removing following old and unserviceable parts / components of “SIDE BOARD Drg No FD-1112 ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18 mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top duly polished complete all as shown on drawing and as directed by Engineer-in-Charge.

Drawer of side baord complete all as shown on drawing and as directed by Engineer-in-Charge.

Handle of side baord complete all as shown on drawing and as directed by Engineer-in-Charge.

Door of side baord complete all as shown on drawing and as directed by Engineer-in-Charge.

Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK WOODEN, Drg No FD-54” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge.

Table top with prelaminated particle board 18 mm thick teak shade and white lamination on other side including 4 mm thick wooden beading all around the top duly polished complete all as shown on drawing and as directed by Engineer-in-Charge.

Drawer of table complete all as shown on drawing and as directed by Engineer-in-Charge.

M&L for Polishing after repair of the table with existing colour and varnish as specified and as directed by Engineer-in-Charge.

S&F in replacement of looking mirror of size 550 x 380 x 5.5mm thick of MIRROR DRESSING GENTS, Drg No FD/ E6/ MAP/16 ” complete all as shown on drawing and as directed by Engineer-in-Charge.

M/S HARJEET ENTERPRISES

M/S MIR AND CO

VEE KAY IND

M/S RATHER STEEL WORKS