Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹40.2 L+₹1.8 L (4.61%)Rejected-Finance AT PO CHANDIPUR BALASORE 756025 | BALASORE | BALASORE | ODISHA | 756025 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹40.7 L+₹2.3 L (5.87%)Rejected-Finance PASCHIM BHAGABANPORE DARUA CONTAI PURBA MEDINIPUR 721401 | PURBA MEDINIPUR | PURBA MEDINIPUR | WEST BENGAL | 721401 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹41.5 L+₹3.1 L (8.00%)Rejected-Finance SRIKONA POTAPOLA CHHAKA CHANDIPUR ROAD BALASORE ODISHA 756025 | BALASORE | BALASORE | ODISHA | 756025 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹41.7 L+₹3.3 L (8.53%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
7 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE I R and D Chandipur Post Chandipur PIN 756025
COMPREHENSIVE MAINT OF TECH AREA FAMILY QTRS UNDER AGE BR I CHANDIPUR
2023_MES_596205_1
8822/CDP
Open Tender
Civil Works
Item Rate
270 days
Chandipur
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandipur
₹80,000
Yes
22 Jun 2023
17 May 2023
9 Jun 2023
17 May 2023
7 Jun 2023
31 May 2023
Amount
NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.
Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed.
M & L for 15 mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC shall be measured and paid seperately) on wall complete all as specified and directed.
M & L for 10 mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed.
M & L for 10 mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement on ceilings complete all as specified and directed.
M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M & L for preperation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls complete all as specified and directed.
Preparation of new plaster surface of wall and applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.
Supply only integral liquid water proofing compound
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.
M & L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.
M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in floor finishes to receive tiles.
M & L for 10 mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete.
M & L for Vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
All as per Sl Item No 14 above but as in vertical surfaces such as skirtings, dado, etc.
M & L for joint free Non - skid Ceramic tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
All as per Sl Item No 16 above but as in vertical surfaces such as skirtings, dado, etc.
M & L joint free glazed ceramic coloured tiles as in vertical surfaces 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles.
M & L for Non Skid coloured ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm ( 300 x 300 mm ) in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from frame) area not exceeding 1.5 Sqm each complete all as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from frame) area exceeding 1.5 Sqm and not exc 4 Sqm each complete all as directed.
Taking down shutters of any description area not exceeding 1 Sqm each each all as directed.
Taking down shutters of any description area exceeding 1 Sqm and not exc 2 Sqm each each all as directed.
M & L 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.
M & L for Preparing of surfaces of backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m eac treated with tar or coal tar black paint complete all as specified and directed.
Cutting holes for inserting hold fasts in Brick walls built in cement mortar and making good disturbed portion in PCC (1: 2 :4) type B1 or in cement mortar (1:3) as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed.
S & F of Mild steel work as in bands, straps, supports or stays for RWP, ventilating pipes, clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S & F for mild steel works tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 (16 mm dia Round bar @ 1.58 Kg / RM) complete all as specified and as directed.
S&F 30 mm thick 2nd class hard wood glazed, gauged, skeleton shutter, as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats open rebated and prepare to receive glass, gauge etc divided into squares edges of framing, plain, chamfered or rounded, mitred and rebated sash bars any numbers prepared to receive glass/ gauge and all as specified.
M & L for 30 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S & F 35 mm thick plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed.
S & F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement.
S & F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening complete.
S & F 100 mm size of Stainless Steel hinges complete all as specified and directed. (ISI Marked) (For Bathroom PVC doors)
S & F Butt hinges medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.
S & F Butt hinges medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.
S & F 250 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and directed.
S & F 100 mm long extruded Aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S & F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 100 mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.
S & F 150 mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.
Taking down and refixing shutter after repair of any description n. exc 1 Sqm each in same opening complete all as specified and as directed.
Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.
S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .
S & F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed .
S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .
S & F in repairs for 100 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .
S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .
S & F in repairs for 100 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .
S & F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F for 150 mm long aluminium plate type II hook & eye for window shutter complete all as specified and as directed.
S & F in repairs 150 mm long aluminium plate type II hook & eye for window shutter complete all as specified and as directed.
S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .
S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.
S & F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S & F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each as in repair
All as per Sl Item No. 57 above but 3.00 mm thick figured glass.
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.
S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.
M & L for preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed
Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.
S & F 19 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screw to timber frame work including second class hardwood beading all around complete all as specified and directed.
S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .
S&F 100mm long Hasp and Staple, Safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.
S & F for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.
S & F stainless steel fancy type curtain rod of outer dia 25 mm with bracket and all accessories (Note : Necessary Bracket including in this items in every curtain rod to be fitted)
S & F Brass CP mixer of 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed in repair
S&F in repairs Stop valves fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore pipe complete.
S&F in repairs Bib taps, fancy type, chromium plated, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete.
S&F in repairs Pillar tap cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down, high pressure with or without letter 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for fixing to 15 mm bore pipe complete.
S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed complete.
S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) including 'P' or 'S' Trap with necessary, fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed.
.M & L in repairs for PVC valve less syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve, float flush pipe and handle including bracket fixed.
Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm as in repair
S & F in repairs vitreous china wash hand basin white, flat back, size 550 x 400 mm with brackets including cutting for and pinning in end of brackets in repairs
Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, approons etc
M & L granite slab (of any type) 20 (+/-2)mm thick machine cut bedded and jointed with greay cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete as in cooking platform.
S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.
S&F in repair shower rose fancy type chromium plated 120 mm (minimum) size with swivel joints suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 190 mm (minimum) long with bend of 45 degree complete all as specified and directed.
S&F in repairs grating doom 100 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and as directed.
S&F Plastic water closet seat cover soft closed white with bottom and cover fixed with aluminium hinging device in repair.
S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
S & F of CPVC pipes of 20 mm dia with SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified. complete all as specified and directed.
Cutting chases not exc 10 cm but n.exc 20cm girth for concealed water tubing and making good to facings where required and pointing in cement mortar 1:3 .
S & F of CPVC pipes of 25 mm dia with SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified. complete all as specified and directed.
Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore complete all as specified and directed.
Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore complete all as specified and directed.
S & F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, necessary clamps fixed to walls including taking down complete all as specified and directed.
S & F for PVC (SWR) 110 mm bends complete all as specified and directed.
S & F in repairs 75 mm dia PVC (SWR & RWP) floor trap plain with grating inclu. jointing with solvent cement of out let dia.
S & F 75 mm dia PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints fixed to wall including taking down old pipe.
S & F for PVC (SWR) 75 mm bends complete all as specified and directed.
Dismantling and stripping the damaged wall of covering plaster by light chiseling and other manual methods until damp surfaces clean up. That might affect adhesion are to be removed by wire brushing. The entire exposed surface shall be washed thoroughly with plenty of Clean water and then allowed to dry. (i) Sealing all surface shrinkage gaps on brick wall and pours shall be sealed with cementitious mortar mixed with a modified styrene butadiene emulsion. (ii) Supply and Applying single coat of Polycote NPW crystalline waterproofing System against negative sides of hydrostatic heads of water for damp proofing, apply by brush. (iii) Supply and Apply, covering plaster at removed damage concrete surface for 10 mm thick with mixing ratio 1- 4 Cement / Sand, adding adhesives styrene butadiene emulsion for plastering. ( Dr. FIXIT / Fosroc / SIKA / REDWOP Chemicals ) Note : Work should be Execute by Authorized Applicator of concerned company.
M & L for providing and applying wall care putty of 0.50 to 1 mm thickness over plastered surface of wall to prepare the surface even and smooth.
Dismantling and stripping the damaged concrete of Internal Roof plaster by light chiseling and other manual methods until damage surfaces clean up. That might affect adhesion are to be removed by wire brushing. The entire exposed surface shall be washed thoroughly with Clean water and then allowed to dry. (i) Exposing the corroded reinforcement completely along its full circumference, cleaned to remove all loose scale and corrosion deposit applying rust removing chemical followed by removing the rust by sand paper and cleaning the area thoroughly by water and allow it to dry. (ii) Supply and Application of Epoxy Zinc Rich primer on the Prepared Reinforced surface after electro welding of it’s sectional area by brush , the primer should have a minimum specific gravity 1.75. Minimum Wet film thickness /coat 100 microns & Dry film thickness / coat 40 microns. Minimum Adhesive bond strength with steel is 1.5 N/mm2. (iii) A general purpose Epoxy Bonding agent to be applied on the concrete surface before the application of free flow non-shrink cementitious micro concrete mortar. The bonding agent should have minimum compressive strength 40 N/mm2 as per BS6319 Part 7. Minimum Flexural Strength 25 N/mm2 as per BS 6319 Part 3 and minimum bond strength as per ASTM C88111 N/mm2 . (iv) Supply and Apply non shrink highly consistent light weight high grade polymer modified repair mortar for vertical and over head cementitious patch work mortar system where local spelling has taken place or shuttering is not possible. The mortar can be applied from a minimum 5mm to 50mm thickness in vertical and overhead applications. The mortar should have a minimum compressive strength 35 N/mm2 in 7 days and 45 N/mm2 in 45 days. Minimum flexural strength should be 6.5 N/mm2 in 28 days. (v) Supply and Apply, covering plaster up to 10 mm thick with mixing ratio 1- 4 Cement / Sand, adding adhesives (Butadiene Styrene Emulsion), for smooth finishing on after Application of non shrink highly consistent light weight high grade polymer modified repair mortar ( Dr. Fixit / Fosroc / SIKA / REDWOP). Note : Work should be Execute by Authorized Applicator of concerned company.
DS ENTERPRISES
RANA ENTERPRISES
bholanath bera
jlenterprise
M/s MANIK SETHI
MS VIDYANJALI
M/S T.N.CONSTRUCTION
Bidder Name
RANA ENTERPRISES
DS ENTERPRISES
M/S T.N.CONSTRUCTION
MS VIDYANJALI
jlenterprise
M/S DK MUKHERJEE CO
bholanath bera
M/s MANIK SETHI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .