Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹33.2 L+₹35,499 (1.08%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹33.5 L+₹64,306.80 (1.96%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹36.0 L+₹3.1 L (9.47%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹36.0 L+₹3.2 L (9.70%)Rejected-AOC PO PS BUD BUD DISTT PURBA BURDWAN PIN 713403 | BUD BUD | PURBA BURDWAN | WEST BENGAL | 713403 | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_597180_1
8400-973/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
Yes
21 Jul 2023
20 May 2023
19 Jun 2023
20 May 2023
17 Jun 2023
3 Jun 2023
Amount
Demolition of cement concrete (un-reinforced) n.exc 15 cm thickness (above or below ground level) and removing rubish from premises complete all as specified and directed.
M&L hardcore of broken stones gauge n .exc 63 mm, deposited, spread and levelled in layers n.exc 150 mm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring complete all as specified and directed.
M&L for providing 40 mm thick PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving complete all as specified and directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.as specified & directed by Engr-in-Charge
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in floor for levelling course complete all as specified and directed by Engr-in-Charge.
M&L for 1st class quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 sqm but n.exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over and including 15mm thick sreed bed of CM (1:4) complete all as specified and directed by Engr-in-Charge Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
M&L for glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including CM (1:3) screed bed or bedding layer of mortar 10 mm thick for laying floor finishes complete all as speciified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
M&L for 1st class quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n.exc 0.18 sqm of approved colour as in floors etc set and joined in neat cement slurry and pointed in white of coloured cement over and including 15mm thick sreed bed of CM (1:6) complete all as specified and directed by Engr-in-Charge Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
M&L for vitrified ceramic tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of CM (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed base of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as speciified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
M&L for 25mm thick chequered cement prepolished concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving tc including the setting and jointing in neat cement paste and slurry 0.3 kg/Sqm over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for 20 mm for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
S&F marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green colour marble complete all as speciified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for machine pressed pre-polished precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc incl raking out joints, hecking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed
M&L rendering 10 mm thick cement plaster in CM (1:6) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed
M&L rendering 15 mm thick with WPC on external surfaces of brick work in cement moratr (1:4) including finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately)
Supply only Liquid water proofing compound complete all as specified and directed
M&L for rendering 5mm thick cement plaster in cement mortar 1:3 on concrete surfaces as in ceiling, chajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed
M&L for preparation of newly surfaces of wall priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for preparation of newly plastered surfaces of wall and applying a layer of wall care putty and two coats of oil bound distemper complete all as specified and directed. (Make : M/s Tractor Acrylic Distemper of Asian/ M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of new surfaces of ceiling applying three coats of white wash complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coats synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .
M&L complete removal of existing surface prepration of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for complete removal/scrapping of existing treatment of plastered surfaces including scraping by means of mechanical scrubber or manually where the machine cannot reach where ever required and applying one coat of primer over a layer of wall care putty and two coats of oil bound distemper complete all a specified and directed. (Make :M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
Demolition of brickwork or stone/boulder masonry, built in CM including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete, all as specified and as directed.
M&L for brick work with fly ash bricks straight or curve on plan to any radius in half bricks thick walls, built in CM (1:4) complete all as specified and directed.
Demolition of RCC (other than ground floor) pillar, beams landing, chajjas, slab shelves & similar suspended work (reinforcement cut as required to facilitate demolition) and removing unserviceable material complete all as specified and directed
M&L reinforced cement concrete (Nominal Mix) type B1 (1:2:4) (using 20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.
S&F Mild Steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engineer in Charge.
All as per item No 37.00 here in before but 8mm dia complete all as specified & directed by Engineer in Charge
Taking down chowkhats or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed
Taking down chowkhats or frame with shutters exe 1.50 Sqm and n.exc 4 sqm (without taking of shutter from frame ) each complete all as specified and directed
Taking down Shutters of any description n.exc 1.00 Sqm each complete all as specified and directed by Engineer-in-Charge.
M&L for chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered, put together with gluepinned at joints complete all as specified and directed by Engr-In-Charge.
S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-In-Charge.
S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge .
S&F Factory made single extruded WPC (Wood polymer composite) solid door/window and others frames/chowkats of size 50x125 mm double shutter comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750kg/cum and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-charge.
S&F factory made single extruded WPC (Wood polymer composite) solid Plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives having minimum density of 650kg/cum and with property of being termite/borer proof,water/moisture proof and fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete as per direction of Engr-in-charge.
S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engr-in- Charge.
S&F Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed.
All as per Item No 49.00 as mentioned herein before but with out glazing bars complete all as specified and directed..
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge
S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed.
S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples including taking out old wire cloth complete all as specified and directed.
S&F aluminium anodised bracket suitable for fixing of 25 mm dia curtain rods complete all as specified and as directed.
S&F 25 mm dia Stainless steel curtain rod complete all as specified and as directed.
M&L for framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F butt hinges 100mm, medium weight of stainless steel all as specified and directed complete all as specified and directed
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 150 mm aluminium handle cast type, anodised complete all as specified and directed
S&F 125 mm aluminium handle cast type, anodised complete all as specified and directed
S&F 300 mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed
S&F 4mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .
S&F 4mm figured glass pin headed type and glazing with oil putty in square n.exc 0.50 sqm each pane complete all as specified and directed.
Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed
Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed
S&F CPVC SDR II pipes laid in floors/trenches with outer dia of pipe 20 mm dia with all fittings and fixtures complete all as specified and as directed by Engr-in-Charge..
S&F CPVC SDR II pipes laid in floors/trenches with outer dia of pipe 25 mm dia with all fittings and fixtures complete all as specified and as directed by Engr-in-Charge..
S&F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 750 x 600 mm including screws complete all as specified and directed. (Make : Prayag/Nirali/Bluestar)
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed (Make : Prayag/Nirali/Bluestar)
S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 mtr to 03 mtr long complete all as specified and directed
S&F in repair soap dish vitreous china white size 160x160x90mm approx all as directed by Engineer-in-Charge
S&F in repair toilet paper holder, vitreous china box type, coloured fixed to wall with chromium plated brass screws complete all as specified and directed
S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of for unions complete all as specified and directed.
S&F in repair PVC connection 15 mm size PTMT nuts of length length 600 mm complete all as specified and directed
S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed
S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.
S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.
S&F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.
S & F in repair wash basins, vitreous china, white, flat back, size 580 mm X 450 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.
S&F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.
S&F in repair 125mm Brass Chromium Plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum), with grating and union for discharge pipe(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed
Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed
S&F in repair 32 mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed
S&F in repair 32 mm bore waste coupling of PTMT (half or full threaded) suitable urinal . (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed
S&F CP tubular towel rail 20mm dia D type 60cm between two flanges complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling board of any description complete all as specified and directed.
S&F anodised aluminum snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed
S&F 6mm thick non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified and as directed.
S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.
Dismantling of AC corrugated, semi corrugated sheets of any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating 150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating 150 GSM GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F wind ties for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling or riveting etc and similar work conforming to Fe 410-O or Fe-310-O including painted with one soap coat of zinc cromate primer paint (including preparation of surfaces at contractor's workshop before fabrication) complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
M&L for pre-laminted 18-20mm thick particle board interior grade prelaminted one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber framework complete all as specified and directed.
S&F in repairs, door closer aluminium body, hydrailically regulated, designation No.2, universal type, suitable for door shutters and weight between 36 to 60 kg and fixed complete all as specified and as directed.
S&F in repairs, floor door stopper over all length of cover plate 140mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed.
S&F in repair mortise lock vertical type 100mm 4 lever brass fixed in luminium door complete all as specified and directed.
Supply and applying Silicon sealant compound in required width of joints with a maximum depth of 50 mm of surface complete all as specified and directed.
Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.
M&L PCC(1:2:4) type B-0 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed.
M&L for 25 mm thick average PCC 1:2:4 type B-0 (12.5 mm graded aggregate) for grading in roof all as per Para 11.42.2 of SSR Part –I 2009 and as directed by Engineer- in-Charge.
M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in CM (1:4) finished even and smooth without using extra cement and WPC complete all as specified and directed.
M&L for preparation ne surfaces of roof and applying two coats of Ployurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @ one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. Notes:- (i) As per description of theis item minimum two coats of Ployurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethene(PU) acrylic based water proofing liquid compound & primer are required for roof treatmen (ii) Quoted rate shall be deemed to be included for work in building/Structure of any height (iii) To be applied by authorised applicator.
S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12 mm fixed properly with suitable nails for repair of cracks at various locations in wall , beam, chajja, facia, slab, lintel etc including taking down plaster of cracked portion nd cutting grooves for receiving wire mesh and making good the area by rendering CM 1:3 and finally to match the surface with adjacent surfaces by applying white wash/OBD or cement base paint as applicable complete all as specified and directed by Engr-in-Charge.
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with clamps and jointed complete all as specified and as directed by Engr-in-Charge.
All as per item No. 112.00 mentioned here-in-above but 75 mm bore complete all as speified and directed.
S&F in repair 110mm bore PVC (SWR) bends any radiuswith access door complete all as specified and as directed by Engr-in-Charge.
S&Fin repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed by Engr-in-Charge.
M/s sadhan kumar mukherjee
ANSH CONSTRUCTION
N B CONSTRUCTION
M/S BHATTACHARJEE ENTERPRISE
M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION
SHREE JAYAM ENTERPRISES
Hooghly Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .