Repair and Upgradation of fire fighting System in university campus.

Amount

Carrying out the checking and periodic preventive maintenance of fire fighting pumps, Automation, star Delta starters, Electrical Panel, Pressure Gauges, Valves and all associated accessories, as per the Inventory attached of Pump House No. I & II. Also to carryout the system operational drill once in three months and check the functioning of the complete fire fighting installation in the University Campus. Identifying the defects if any anywhere in the system and report to Engineer-in-Charge for his directions etc as required.

Providing , fixing, testing and commissioning of industrial type pressure guage of 100 mm dia. for inspection of the pressure of flow of water complete as required.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

To carryout the "B" Check of 92 HP Diesel Engine of Kirloskar make, Type: 6 R 1080, coupled with Fire Pump testing etc, as required including i) Oil Filter - 01 No. ii) Fuel Filter Set - 01 Set iii) Air Filter Set -01 Set iv) Coolant - 03 Ltrs. v) Replacement of burnt out lube oil with new lube oil (Lube Oil shall be supplied by Deptt. free of cost)

Supply Installation Testing & Commissioning of following sizes butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly as per ISI 13095 complete with rubber gasket, nut bolt washers etc complete as required Old dismantling of asorted valve taking away the same as credit item on buy back basis as required following below, 50 mm dia

Supply Installation Testing & Commissioning of following sizes butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly as per ISI 13095 complete with rubber gasket, nut bolt washers etc complete as required Old dismantling of asorted valve taking away the same as credit item on buy back basis as required following below, 65 mm dia

Supply Installation Testing & Commissioning of following sizes butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly as per ISI 13095 complete with rubber gasket, nut bolt washers etc complete as required Old dismantling of asorted valve taking away the same as credit item on buy back basis as required following below, . 100 mm dia

Supply Installation Testing & Commissioning of following sizes butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly as per ISI 13095 complete with rubber gasket, nut bolt washers etc complete as required Old dismantling of asorted valve taking away the same as credit item on buy back basis as required following below, 80 mm dia

Supply Installation Testing & Commissioning of following sizes butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly as per ISI 13095 complete with rubber gasket, nut bolt washers etc complete as required Old dismantling of asorted valve taking away the same as credit item on buy back basis as required following below, 150mm dia

Repairs of 100 H.P 3 phase Main fire pump motor set of Kirloskar make model D8M 100/36 including replacing the front & Rear Bearings, Mechanical seal, sleeve, seal plate etc. tasting commissioning, as required.

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 Mtrs

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 150mm Dia

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Stainless Steel cap and chain as required , Single headed Stainless steel and Old dismantling of taking away the same as credit item on buy back basis

Supplying and fixing Hose box (Double Door) (750mm x 600mm x 250mm) 16 gauge suitable for 2 no. 15mtr. Hose and 1 no short branch pipe. Complete in all respect. Including nut and bolts etc,Old dismantling M.S.hose box and taking away the same as credit item on buy back basis as required

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge. Nominal concrete 1:3:6 or richer mix ( i/c equivalent design mix)

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :Water bound macadam road (WBM).

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drain (not exceeding 1.5m in width or 10sqm on plan),including dressing of sides and ramming of bottoms,lift upto 1.5m. Including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m (A) All kinds of soil.

Providing , fixing, testing and commissioning of following sizes M.S. black Pipe, ‘C’ Class, duly welded, screwed, threaded with fitting as like Tees, elbow, M.S bend, M.S reducer, flange, Nipple, M.S. support with fastener, M.S. angle brackets, clamps etc. duly epoxy painted two coats, of primer as per specification and as required complete in all respect including dismantling removal of existing pipe. 200 mm dia (wall thickness 6.3 mm)

Providing , fixing, testing and commissioning of following sizes M.S. black Pipe, ‘C’ Class, duly welded, screwed, threaded with fitting as like Tees, elbow, M.S bend, M.S reducer, flange, Nipple, M.S. support with fastener, M.S. angle brackets, clamps etc. duly epoxy painted two coats, of primer as per specification and as required complete in all respect including dismantling removal of existing pipe. 150 mm dia. ( As per IS: 1239)

Providing , fixing, testing and commissioning of following sizes M.S. black Pipe, ‘C’ Class, duly welded, screwed, threaded with fitting as like Tees, elbow, M.S bend, M.S reducer, flange, Nipple, M.S. support with fastener, M.S. angle brackets, clamps etc. duly epoxy painted two coats, of primer as per specification and as required complete in all respect including dismantling removal of existing pipe. 100 mm dia. ( As per IS: 1239)

Providing , fixing, testing and commissioning of following sizes M.S. black Pipe, ‘C’ Class, duly welded, screwed, threaded with fitting as like Tees, elbow, M.S bend, M.S reducer, flange, Nipple, M.S. support with fastener, M.S. angle brackets, clamps etc. duly epoxy painted two coats, of primer as per specification and as required complete in all respect including dismantling removal of existing pipe. 80 mm dia. ( As per IS: 1239)

Providing , fixing, testing and commissioning of following sizes M.S. black Pipe, ‘C’ Class, duly welded, screwed, threaded with fitting as like Tees, elbow, M.S bend, M.S reducer, flange, Nipple, M.S. support with fastener, M.S. angle brackets, clamps etc. duly epoxy painted two coats, of primer as per specification and as required complete in all respect including dismantling removal of existing pipe. 65 mm dia. ( As per IS: 1239)

Providing protection to underground M.S. pipe and accessories by wrapping bitumen faced hesian tape including proper overlaps on joints testing, commissioning complete as required.For 150mm& 100mmdia.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5 m

Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering -all work up to plinth level. 1:1½:3 (1 cement:1½coarse sand (zone-III):3 graded stone aggregate 20mm nominal size)

Kota stone slab flooring over 20mm (average)thick base laide over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with basee of cement mortar 1:4 (1 cement : coarse sand) : 11.26.1 25 mm thick

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Steel work welded in built up section /framed work, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating ,frames, guard bar, ladder, railings, railings, brackets, gates and similar works.

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 150mm dia

Credit item Old dismantling of asorted sizes M.S. black pipes and taking away the same as credit item on buy back basis as required following 150 mm dia MS pipe

Credit item Old dismantling of asorted sizes M.S. black pipes and taking away the same as credit item on buy back basis as required following 200 mm dia MS pipe

FACT SYSTEMS

OPEROSE ASSOCIATES