REPAIR TO CERTAIN MISC ITEMS OF B AND R WORKS AT WATER SUPPLY INSTALLATION AND CONNECTED RWT NOS 04 AND 05 NEAR PRIMARY PUMP HOUSE UNDER GE UTILITY BATHINDA AT BATHINDA MIL STN

Amount

Taking down cement plaster plaster on brick or stone walls, etc. , terrazo finishes , including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer-in- Charge.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed by Engineer-in- Charge.

Material and Labour Brick work built in Cement Mortar 1:6 with sub class 'B' Burnt clay bricks straight or curved on plan exceeding 6.00 m mean radius complete all as specified.

Material and Labour rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:4 finishing even and smooth without using extra cement complete all as specified.

Material and Labour rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:6 finishing even and smooth without using extra cement complete all as specified.

Material and Labour for applying two coats of cement base paint over a coat of appropriate primer on newly plastered wall including cornices & pillasters etc including preparation of new surface complete all as specified.

Material and Labour for applying three coats of white wash on walls on newly plastered surface of wall including preparation of new surface complete all as specified.

Material and Labour for preparation of old steel and iron surfaces of any description exc 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified

Material and Labour for applying one coat of cement base paint on old plastered surface of wall including preparation of old surface complete all as specified.

Material and Labour for applying two coats of white wash on old plastered surface of wall including preparation of old surface complete all as specified.

Material and Labour for applying two coats of white wash on old plastered surface of ceiling including preparation of surfaces complete all as specified.

Demolition of plain cement concrete in ground floor and pavings not exc. 15cm thick (below or above ground level) including floor tiles of any description complete all as specified.

Material and Labour 50mm thick, cement concrete 1:3:6, type C-1 (20mm graded crushed stone aggregates) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge..

Material and Labour for 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in Sub base complete all as specified and directed by Engineer-in-Charge..

Material and Labour for 100mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in hard standing finished even and smooth without using extra cement (PCC shall be laid in alternate bays in panels of size not exc 2.4m x 2.4m or as directed) complete all as specified and directed by Engineer-in-Charge.

Finishing to surface of concrete pavement, by brooming making rough impressions on the top surface complete all as specified and directed by Engineer-in-Charge.

Removing excavated material in soft soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and Labour Continous brick edging with burnt clay of sub class ' B ' bricks , with width equal to the length of the brick laid dry on end vertically etc. complete all as specified.

Material and Labour Factory made pre polished chequered cement concrete tiles area exceedng 0.08 Sqm but not exceeding 0.11 Sqm, 25mm thick set jointed and pointed in neat cement slurry at the rate of 3.00 kg per Sqm in floors with white cement and mixed with colour pigments to match with the shades of tiles over & including 15mm thick screed bed in cement and sand mortar 1:6 all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in Concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground, complete all as specified and directed by Engineer-in-Charge..

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge..

Material and Labour cement concrete 1:3:6 type C-2 using (40 mm crushed stone aggregates as in boundry pillars, posts (including caps and bases) complete all as specified and directed by Engineer-in-Charge..

Supply and fixing Mild steel work of Fe-290 Gde E -165 as in angle iron fencing posts & flat iron drilled and countersunk for boulders running bars,including embedding in concrete and scruing etc,post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc,flat iron fillets (for securing wire mesh etc.) Including all necessary drilling,bolting or riveting etc.complete all as specified . Note:- The element of Fixing of round bars for chain link fencing is included in this item .Nothing shall extra be paid on this account .

Supply and fixing Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified.

Material and Labour for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, exceeding 10 cm in width or girth including preparation of surfaces complete all as specified.

Supply only chain link mild steel galvanised fencing (mesh size 100 mm x 100 mm of 10 gauge wire) complete all as specified.completred all as specified.Note : The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly. BOO duly counter signed by GE shall be enclosed with final bill.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified.

Supply and fixing 11-15 mm dia of neck , .length of bolt exc 5cm long and not exc.10m long, MS screw bolt machine made with hexagonal or square head at one end and screwed the other,or screwed both ends,each screwed end fixed with washer complete all as specified and directed .

Supply only 10mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed. Note :-Fixing element of this item is included in serial item no. 23 here-in-before.

Dismantling of wrought iron or mold steel work of any description not otherwise provided for complete all as specified.

Material and Labour Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

HRML CONSTRUCTIONS

M/s Verma Construction Company

Aman Enterprises