PROVN OF 2 x MAIN SEPTIC TANKS ALONGWITH SOAKAGE WELL CAB AND TOILET FOR GENTS AND LADIES IN SARGAM SHOPPING COMPLEX INCLUDING CERTAIN REVENUE WORKS AT DINJAN MIL STN

Amount

Site clearance including cutting and dressing of the existing vegitation (trees/bush/plants/glass, etc.,) of all types and all sizes wherever required for the approches and work alignment of area, etc. complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15 deep and getting out in soft/loose complete all as specifed and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

All as per item No. 3 above but depth exceeding 1.5 m but not exceeding 3.0m complete all as specified and as directed

Excavation over areas depth exceeding 3.0m but not exc 4.50m getting out in soft/loose soil complete all as specified and as directed

All as per Item No. 5 above but depth exceeding 4.5m but not exceeding 6.0m complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm in soil complete all as specified and as directed.

Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Spreading and levelling excavated soil in layers not exceeding 25cm thick in floor area complete all as specified and as directed.

M&L for hardcore of gauge n exc 63mm deposited, spread and levelled in layers and exc. 15 cm thick watered and rolled/rammed to a true surface with broken stone or boulders complete all as specified and as directed.

M&L for treating the back fill in contact with foundation at the rate of 7.5 liters of emulsion per sqm of vertical surfaces (Area of sub structure in contact with back fill to be measured) complete all as specified and as directed.

M&L for treating the top surface of fIlled earth at the rate of 5 liters of emulsion per sqm of surface complete all as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and as directed.

M&L for cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundation, mass concrete complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved in plan not exc 6m mean radius built in cement mortar (1:6) as in wall complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks in one brick thick honey comb walling built in cement mortar (1:6) complete all as specified and as directed.

M&L for half brick work with sub class B bricks burnt straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.

M&L for plain cement concrete, type B1 (1:2:4) (using 20mm graded aggregate) as in linted upto 1.5m clear span, cills steps sesmic and the similar bands plinth course, string (cours lacing courses, parapets coping kneelers, apox stone and the like including weather etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work of concrete surface in cement mortar (1:4) finished fair & even complete all as specified and as directed.

M&L for rendering 20 mm thick internally in cement mortor (1:3) on faces other than fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on other then fair faces of brick or concrete surfaces of wall in cement mortar (1:6) complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for 150mm dia for salt glazed stoneware drain pipes of Grade "A" laid in trenches and jointed complete all as specified and as directed.

M&L for concrete bed 1:3:6, type C-2 (using 40mm graded aggregate) to 150mm drain pipes including packing under, and haunching against sides of pipes after they are laid and tested in complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc. complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel(1/2 round and 3/4 secton) in cement concrete (1:2:4) type B-1 smooth finished and reforming bencing as required for 150mm dia complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 secton) in cement concrete (1:2:4) type B-1 smooth finished and reforming bencing as required for 200mm dia complete all as specified and as directed.

M&L Precast RCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) in cover slabs (for manholes etc) and similar articles with plain faces and set in cement mortar (1:6) complete as specified and directed.

M & L for TMT steel bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for TMT steel bars 6mm dia to 8mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F TMT steel bars 6mm dia., and over cut to length, bend to shape required, including cranking, bending spirally as in nibs, stirrups, spacers and binders binding with and including providing mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings and plinth beams etc. flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for formwork to sides and soffits floor or roof beams , lintel, cantilevers, shelves etc. curved rough finished surfaces of concrete complete all as specified and as directed.

M&L for formwork to sides of pillar , column etc. rough finished surfaces of concrete complete all as specifiedand as directed.

M&L for formwork to soffits of suspended slab such as roof slab, floor slab and similar work flat rough finished surfaces of concrete not exceeding 200 mm thick complete all as specified and as directed.

M&L for formwork to partition wall and similar work flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) using 20 mm grade aggregate as in foundations, footings and plinth beams etc. complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) using 20 mm grade aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) using 20 mm grade aggregate as in columns, pillars , posts etc. complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) using 20 mm grade aggregate as in slab supported on walls, beams and columns in floors, roofs and in shelves and the like etc. complete all as specified and as directed.

M&L for loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage well complete all as specified and as directed.

S&F for 150mm bore cast iron waste pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and as directed.

S&F for 75mm bore cast iron vent pipe in any length fixed to walls complete all as specified and as directed.

S&F for 75mm bore cast iron slotted vent cowl complete all as specified and as directed.

M&L for RCC, 1:2:4, type B1 (Nominal Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors , roofs and in shelves and the like etc. complete all as specified and as directed.

M&L for RCC, 1:2:4, B1, (Nominal Mix) using 20 mm graded aggregate as in partition walls and the like complete all as specified and as directed.

M&L for RCC, 1:2:4, type B1 (Nominal Mix) using 20 mm graded aggregate, in foundations including rafts, footings, foundation, plinth beams, bases for columns, etc. basement slabs, underreamed piles and masss concrete (nominal mix) complete all as specified and as directed.

M&L for RCC, 1:2:4, type B1, (Nominal Mix) using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC, 1:2:4, type B1, (Nominal Mix) using 20 mm graded aggregate columns, pillars, piers, posts and struts, complete all as specified and as directed.

S&F for cost iron pipe 150mm bore with spigot and socket and socket ends centrifugally cast, class LA, in any length, laid in tranches complete all as specified and as directed.

S&F for pressed steel door frame 105x60mm for doors/ventilator with one or more rebates including necessary fixing lugs hinges lock strike plates complete all as specified and as directed. (Note : PCC filling of holloow section measured and paid seprately)

M&L PCC, type C1, 1:3:6 (using 20mm graded aggregate) for cills,hold fast filling of hollow of pressed steel door frame etc complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood made at site plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed.

M&L for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S&F for sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane 4 mm thk float complete all as specified and as directed.

S&F for 100mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F for 100mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F for 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F for 125mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F for 150mm aluminium handles cast type, anodised complete all as specified and as directed.

S&F for 300mm long aluminium alloy anodised sliding door bolts, with haps and staples (bolt type) and fixing clips of sheet, cast oions or cast aluminium alloy and fixed. with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm (300x300x7mm) over 15mm thick screed bed or bedding in cement mortar (1:6) over 25mm thick PCC, (1:2:4) Type B0 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400X400X7mm) in floor, over 20mm thick screed bed in cement nortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

M&L for Non skid coloured Ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18Sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match and 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300X200X7mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side building over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for two coats of distermper on walls with distemper oil emulsion over a coat of chalk whiting on old plastered wall surfaces including preparation of surfaces complete all as specified and as directed.

M&L for two coats of exterior emoulsion paint to walls surfaces over a coat of primer including preparation of new surface complete all as specified and as directed.

M&L for preparing newly wood or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new steel surfaces over 10cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F for vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F for vitreous china pedestal pattern white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and as directed.

M&L for granite (of any type) work (tablerubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

S&F for 10 ltrs capacity PVC valveless, syphonic action type low level flushing cistern white ISI marked with inlet ball valve, float valve and handle including bracket with 32mm dia PVC pipe 600mm long complete all as specified and as directed.

S&F for bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for oiron pipe or brass ferrule, fancy type, chromium plated, 15mm nominal bore complete all as specified and as directed.

S&F for stop valve15mm bore cast copper alloy fancy type chromonium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F for soap dish, vitreous china white, approximate size 160x160x90mm complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed.

S&F for 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and as directed.

S&F for 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed complete all as specified and as directed (minimum wt. 90gms).

S&F for PVC connection 15mm bore length not less than 450mm long with both ends PTMT nuts complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S&F for 110mm bore PVC (SWR) bends with oval access door all as specified and as directed.

S&F for 110 mm PVC (SWR) bend any radius complete all as specified and as directed.

S&F for 110mm bore.PVC(SWR) junction single (single 'T') equal or unequal with access door complete all as specified and as directed.

S&F for 20 mm dia ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F for rotational moulded polyethylene water storage tank 500 litres capacity consisting of three layer cylindrical vertical with top closed hoisted and fixed in position complete all as specified and as directed.

S&F for galvanised iron pipes 15mm dia nominal bore complete with GI fittings and clamps cutting, concealing GI pipe/fittings in to wall and making good the walls, floors, ceiling etc wherever required complete all as specified and as directed.

S&F for galvanised iron pipes 20mm dia nominal bore complete with GI fittings and clamps cutting, concealing GI pipe/fittings in to wall and making good the walls, floors, ceiling etc wherever required complete all as specified and as directed.

S&F for galvanised iron pipes 32mm dia nominal bore complete with GI fittings and clamps cutting, concealing GI pipe/fittings in to wall and making good the walls, floors, ceiling etc wherever required complete all as specified and as directed.

M&L for 150x150 mm salt glazed stoneware gully traps, square or round mouthed, type 'P' complete all as specified and as directed.

M&L for 100x100 mm salt glazed stoneware gully traps, square or round mouthed, type 'P' complete all as specified and as directed.

S&F for vitreous china wash basin(coloured) wall hung type of size 580x450mm CI brackets 15mm fancy CP brass pillar taps CP brass chain with rubber plug 32mm dia CP brass waste of standard pattern 32mm dia CP brass trap and unions 32mm dia CP brass trap and unions complete cutting & making good the walls wherever required complete all as specified and as directed.

S&F for vitreous China urinals, bowl type (back or corner wall ype), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed.

S&F for helath faucet cast copper alloy with push button flexible steel pipe with PVC lining of 1 mtr long suitable for 15mm pipe complete all as specified and as directed.

M&L for PCC precast (M-35) inter locking paver block 60mm thick made with electro-vibro technology of approved design and colour and securing laying on and including not less than 50mm thick stone dust complete all as specified and as directed.

M&L for sand filling under or in foundation inclding watering and consiolidation complete all as specified and as directed.

Supply only 50 micron polythene sheet black for flooring complete all as specified and as directed.

M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed :- (a) Taking down existing old tarfelt, bituminous compound including cleaning and removing debris to a distance exceeding 100m not not exceeding 250m. (b) 15mm thick rendering in cement mortar (1:4) finished even and smooth. (c) Preparing and cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) applied over bituminous primer as specified above. Application of polymeric membrane done by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm, complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for 100mm thick cement concrete (1:4:8) type D2 (using 40mm stone aggregate) as in sub base complete all as specified and as directed.

M&L for 100mm thick cement concrete type B-2 (1:2:4) (40mm graded aggregarte) as in hard standing/path complete all as specified and as directed.

M&L for forming construction joints 10mm wide and 100mm deep and filling with joints sealing compound grade 'A' complete all as specified and as directed.

M&L for forming construction (Dummy) joint 65mm deep x 10mm wide filled with ceiling compound of grade 'A' complete all as specified and as directed.

M&L for concealed point wiring with 1.5 sq mm (nominal area) single core pvc insulated FR unsheathed multi-standared copper conductor cable (maintaining colour code) , 1100 volt grade and including pvc conduitct (size as required site) concealed and sunken terminal boxes with 3 mm hylam sheet top cover of adequate size for mounting switches , sockets , regulators light fitting etc complete with all fitting and accessories fixed to wall /ceiling for one light /fan/call bell point concealed by one switch including one run 1.5 sq mm (nominal area) PVC insulated frame retardant unsheathed multistranded copper conductor cable green in colour for earth continuity conductor connected to common earth point duly completed all as specified and as directed.

S&F for switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.

S&F for ceiling rose, 3 way PVC insulated body complete all as specified and as directed.

S&F for 18W surface and wall mounted LED batten with polycarbonate housing and intigrated. Make : Cat No LUMILINEBS18WLED865SPCWH of Havells/Philips/Bajaj/CG/Wipro

M&L for lamp holder, PVC/ poly carbonate type with black plate suitable for batten fittings complete all as specified and as directed.

S&F for LED lamp 7 Watt complete all as specified and asd directed. Make : Havells/Philips/Bajaj

S&F for 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver compartment with IP 65 protection and inpact resistance of IK07 complete all as specified and as directed. Make : Cat No. ENDURAPEARLSL25WLED757SASYTOPC of Havells/Philips/Bajaj/ CG/wipro.

S&F for exhaust fans AC single phase 230/ 240 V of size 380 mm sweep 1 phase 1400 RPM complete all as specified and as directed. Make : Crompton/Bajaj/Havells.

M&L for cutting/making hole for fixing of exhaust fan as per size and making good disturbed surface with existing surface complete all as specified and as directed.

S&F for sheet metal enclosure for MCB DB double door single pole and neutral 4 way, 240 V with common bus bar at incomming end complete all as specified and as directed.

S&F for MCB 'C' curve single pole and neutral 6 to 32 amps with breaking capacity 10 kA, Cat No. 408609-17 complete all as specified and as directed. Make: Legrand/Havells/HPL

S&F for MCB 'C' series SP 6 to 32 amps, 240 volts, breaking capacity 10KA, cat no. 4086 09-17 complete all as specified and as directed. Make: Legrand/Havells/HPL

S&F for 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection's suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire, one twin core cable slat or circular 10.0 sq mm solid conductor complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

MAZUMDAR ENTERPRISE

M/S A K BROTHERS

M/S BORAH BROTHERS

M/S CHANDAN ENTERPRISE

jitendra narayan goswami

M/S Ranjan Gohain