Tender ID

Karnataka

Retender

Works

Electrical

ELECTRICAL REPAIR WORKS TO (SC) KRCRS COMPLEX AT SHIVANAHALLI, KANAKAPURA TQ, RAMANAGARA DIST.

Karnataka Residential Educational Institutions Society

KREIS Assistant Executive Engineer Section Bengaluru | Karnataka

Amount: ₹15.4 LCloses: 2 Aug 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published19 Jul 2024
Closed2 Aug 2024
Retendered19 Jul 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 19 Jul 2024

Tender Value

₹15.4 L

EMD Value

₹38,500

Closing Date

2 Aug 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Residential Educational Institutions Society

Contact Person

S K MAHADEVA

Mobile Number

Work Description

ELECTRICAL REPAIR WORKS TO (SC) KRCRS COMPLEX AT SHIVANAHALLI, KANAKAPURA TQ, RAMANAGARA DIST.

Tender Information

Tender ID

KREIS/2024-25/EL/WORK_INDENT266

Reference Number

KREIS/2024-25/EL/WORK_INDENT266

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

KREIS Assistant Executive Engineer Section Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredThe Tenderer shall have valid class-II AND ABOVE ELECTRICAL LICENSE ISSUED BY CHIEF ELECTRICAL INSPECTORATE OF GOVT

RequiredAnnual turnover for the last 5 years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24.Certificate by CA with UDIN number.

RequiredAchieved in at least two financial years a minimum financial turnover in all classes of Electrical works of Rs 15.38 Lakhs.

RequiredSatisfactorily completed as prime contractor, atleast one similar nature of work such as HT Electrical Works like Erection & Commissioning of HT Metering Cubicle, LT Metering Cubicle, HT Cable laying and termination work of value not less than Rs 7.69 Lakhs.

RequiredThe Tenderer shall give details of the works on hand. Present contract commitment.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

contractor have should be class-1 and above valid licence.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Total value of Electrical engineering works executed and payments received in the last five years (year-wise)

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All scanned documents to be uploaded shall be in original. All the original documents to be submitted for verification at the time of technical bid opening or next day. And the Executive Director reserves the right to varify the original documents before approval.

If any, additional information required, the same may be obtained from the office of the Executive Director, 8, M S B-1, 6th & 7th Floor, Cunningham Road, Bangalore-52 during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday , the next working day will be considered

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reason

The Tender processing fee shall not be refundable.

Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

If the Successful Bidder has quoted lesser rates than the estimated rates then he should without fail remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected

All the items of work as Maintained in the Bill of Quantity (BOQ) are including lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all machinery and equipment required for successful completion of work etc., complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work

Terms and condition of Contract are as per Approved STD KW-1

The rates quoted are to be inclusive of GST. GST will be not paid to the tendered amount separately by KREIS. In the extended period of contract, GST will not be paid by KREIS and is to be paid by the contractor himself.

The defect liability period is 12 months from the date of the completion of the work.

The employer is not responsible for any technical hiccups or delay in accessing E - Procurement Portal.

All statutory charges like Electrical deposit, Electrical Inspectorate charges shall be paid by the Contractor and complete the work. The same will be re-imbursed by KREIS after submission of paid receipts.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹38,500

Important Dates

Last Activity

19 Jul 2024

Published

19 Jul 2024

Download Ends

26 Jul 2024

BOQ Preview

•

Supplying of feet pvc Batten with integrated LED tube. W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80Power Input: 220-240V @ 50/60Hz & Power factor 0...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6 Amps SP Switch ---- Including all lead and lift charges, loading and unloading charges, labour charges, ...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.Electronic stepped regulator. ---- Including all lead and lift charges, loading and unloading charges, lab...

•

Supplying, fixing, wiring, earth electrode for grounding conduits,I.C.cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GIpipe 2.5m long buried in a pit.The pit shouldbe fil...

•

Supplying,fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40 Amps 4 pole. ---- Including all lead and lift charges, loading a...

•

DINING AND KITCHEN

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.32 Amps Bakelite DP ---- Including all lead and lift charges, loading and unloading charges, labour charge...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6 Amps lamp holder ---- Including all lead and lift charges, loading and unloading charges, labour charges...

•

Supplying, fixing, wiring, earth electrode for grounding conduits,I.C.cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit.The pit shouldbe fi...

•

Supplying,fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40 Amps 4 pole ---- Including all lead and lift charges, loading an...

•

Supplying of .feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power fact...

•

GIRLSDORMITORY-1

•

Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power facto...

•

GIRLSDORMITORY-2

•

Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input220-240V @ 50/60Hz & Power factor 0....

•

Supplying of .feet - PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power fact...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps SP Switch ---- Including all lead and lift charges, loading and unloading charges, labour charges, a...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6 Amps 3 way 5 pin Socket ---- Including all lead and lift charges, loading and unloading charges, labour ...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.16 Amps 3 way 5 pin socket ---- Including all lead and lift charges, loading and unloading charges, labour...

•

Automatic Switch for Street Light ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments ...

•

Supplying and Fixing.mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light...

•

Supplying,fixing and wiring Automatic Power Factor controller circuit unit fully,static units controlled by 14 stage microprocessor operation, relays LED display, elf programming function for power st...

•

Supply of led streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly c...

•

TRANSFORMER YARD

•

Supplying and Fixing of DANGER board. (BESCOM) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery an...

•

EHV Grade Transformer Oil - New (BESCOM) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equi...

•

silica gel ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for successful...

•

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two coats on new work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matt...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...

•

GI/Copper strips fo grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip ---- Including all lead and lift charges, loading and unloading charges, labour charges, all ...

•

9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR. (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) ---- Including all lead and lift charges, loading and unloading charges, lab...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring stripthickness and resistivity as per IS-3975.35 Sqmm, ...

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.Up to 4C x 50 Sqmm. ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hir...

•

Pole Mounted Fibre Glass Reinforced Aerial Fuse Board 60 Amps - 3 Way (Dwg No. BESCOM/GM/QS&S/24 Dtd 24.11.2018) ---- Including all lead and lift charges, loading and unloading charges, labour charges...

•

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL(Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991 ---- Including all lead and lift charges, loading and unloading charges, labour ...

•

Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable) - MS(Dwg No. BESCOM/GM/QS&S/67 Dtd 24.11.2018) ---- Including all...

•

11 kV, 3 Core, XPLE HT UG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 - 95 Sqmm, (54 GI Wires - 2.5 mm Dia...

•

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable- 3Cx95Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charge...

•

Heat Shrinkable outdoor Type Cable termination kit for xlpe Cable 3Cx95Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charge...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 120 Sq...

•

LT Metering Box for housing the ETV Meter without CT's busbar wiring etc ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges o...

•

11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018 ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges...

•

Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling rafters / girders using 23/0.0076” twin twisted PVC insulated wires, ...

•

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

•

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Including all lead and li...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT cable 120 to 240 Sqmm (3.5/4 Core) ---- Including all lead an...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.LT cable 35 to 95 Sqmm (3.5/4 Core) ---- Including all lead and ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.HT Cable3x95 to 150 Sqmm ---- Including all lead and lift charge...

•

Erection of 11 Mtr long Concrete Spun Pole in a pit of 2.5 Mtr depth (Mechnised Labour) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges,...

•

Fixing of GOS including wiring (11 kV Single Break 200 Amps) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men an...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depthupto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and...

•

Digging of Pit 2.5 Mtr depth for erection of 11 Mtr long Tubular Spun Pole as per approved Drawing.Hard Soil ---- Including all lead and lift charges, loading and unloading charges, labour charges, al...

•

HT TO LT CONVERSION MATERIAL COST

•

LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) CT ratio: 75/1 A as per drawing No: BESCOM/GM/QS&...

•

CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port BIDIRECTIONAL (Used for Boundary Metering) ---- Including all lead and lift charges, loading a...

•

GSM modem with connecting cable for remote communicating capabilities ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of a...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 150 Sq...

•

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 - 95 Sqmm, (54 GI Wires - 2.5 mm Dia)...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 25 Sqm...

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20 A single phase Class-1 Accuracy with Temper Proof Energy Meter. - Staff Quarters ---- Including all lead and lift charges, loading...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50 x 50...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/ 63A three phase 4 wire whole current class-1Accuracy Energy Meter. For Borewell E ---- Including all lead and lift charges, loadi...

•

Supplying & Fixing Chemical earthing for grounding. Conduits, ICcut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fa...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Fixing a shunt capacitor of .kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.6 to 10 kVAR ---- Including all lead an...

•

HT TO LT CONVERSION LABOUR

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff ---- Including all lead and lift charges, loading and unloading ...

•

CIVIL ENGINEERING WORKS

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1-SHIVANAHALLI.doc

Tender Document • 0.88 MB

Drawings upload.pdf

Others - DRAWINGS • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Electrical

ELECTRICAL REPAIR WORKS TO (SC) KRCRS COMPLEX AT SHIVANAHALLI, KANAKAPURA TQ, RAMANAGARA DIST.

Karnataka Residential Educational Institutions Society

KREIS Assistant Executive Engineer Section Bengaluru | Karnataka

Amount: ₹15.4 LCloses: 2 Aug 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published19 Jul 2024
Closed2 Aug 2024
Retendered19 Jul 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 19 Jul 2024

Tender Value

₹15.4 L

EMD Value

₹38,500

Closing Date

2 Aug 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Residential Educational Institutions Society

Contact Person

S K MAHADEVA

Mobile Number

Work Description

ELECTRICAL REPAIR WORKS TO (SC) KRCRS COMPLEX AT SHIVANAHALLI, KANAKAPURA TQ, RAMANAGARA DIST.

Tender Information

Tender ID

KREIS/2024-25/EL/WORK_INDENT266

Reference Number

KREIS/2024-25/EL/WORK_INDENT266

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

KREIS Assistant Executive Engineer Section Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredThe Tenderer shall have valid class-II AND ABOVE ELECTRICAL LICENSE ISSUED BY CHIEF ELECTRICAL INSPECTORATE OF GOVT

RequiredAnnual turnover for the last 5 years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24.Certificate by CA with UDIN number.

RequiredAchieved in at least two financial years a minimum financial turnover in all classes of Electrical works of Rs 15.38 Lakhs.

RequiredThe Tenderer shall give details of the works on hand. Present contract commitment.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

contractor have should be class-1 and above valid licence.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Total value of Electrical engineering works executed and payments received in the last five years (year-wise)

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reason

The Tender processing fee shall not be refundable.

Terms and condition of Contract are as per Approved STD KW-1

The defect liability period is 12 months from the date of the completion of the work.

The employer is not responsible for any technical hiccups or delay in accessing E - Procurement Portal.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹38,500

Important Dates

Last Activity

19 Jul 2024

Published

19 Jul 2024

Download Ends

26 Jul 2024

BOQ Preview

•

DINING AND KITCHEN

•

Supplying, fixing, wiring, earth electrode for grounding conduits,I.C.cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5m long buried in a pit.The pit shouldbe fi...

•

GIRLSDORMITORY-1

•

GIRLSDORMITORY-2

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps SP Switch ---- Including all lead and lift charges, loading and unloading charges, labour charges, a...

•

TRANSFORMER YARD

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 120 Sq...

•

HT TO LT CONVERSION MATERIAL COST

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 150 Sq...

•

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 - 95 Sqmm, (54 GI Wires - 2.5 mm Dia)...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 25 Sqm...

•

HT TO LT CONVERSION LABOUR

•

CIVIL ENGINEERING WORKS

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1-SHIVANAHALLI.doc

Tender Document • 0.88 MB

Drawings upload.pdf

Others - DRAWINGS • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid