Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹243.0 CrAdmitted-Finance | ₹243.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹250.4 CrAdmitted-Finance | ₹250.4 Cr | L2 | Admitted-Finance |
| 3 | L3₹257.0 CrAdmitted-Finance | ₹257.0 Cr | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SUNIL KUMAR AGARWAL L3 | TASHI GYALPO BHUTIA L1 | NORDEN DORJEE SANGDERPA L2 |
|---|---|---|---|---|---|---|
| 1.0011 KV FEEDER RELACEMENT WITH 99 SQMM COVERED CONDUCTOR | ||||||
| 2.00 | 11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 99sqmm Conductor including all nuts & bolts complete without arms. | 268 | Nos. | 56,100 ₹1.5 Cr | 52,500 ₹1.4 Cr | 55,000 ₹1.5 Cr |
| 3.00 | 11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts | 1,072 | Nos. | 3,380 ₹36.2 L | 3,200 ₹34.3 L | 3,300 ₹35.4 L |
| 4.00 | Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator | 1,072 | Nos. | 741 ₹7.9 L | 710 ₹7.6 L | 727 ₹7.8 L |
| 5.00 | 11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts | 1,786 | Nos. | 3,380 ₹60.4 L | 3,200 ₹57.2 L | 3,300 ₹58.9 L |
| 6.00 | 11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts | 1,786 | Nos. | 4,100 ₹73.2 L | 3,900 ₹69.7 L | 4,000 ₹71.4 L |
| 7.00 | Insulating Piercing Connector | 715 | Nos. | 3,900 ₹27.9 L | 3,700 ₹26.5 L | 3,800 ₹27.2 L |
| 8.00 | "T" joint tap off with Busbar | 268 | Nos. | 17,700 ₹47.4 L | 16,800 ₹45.0 L | 17,200 ₹46.1 L |
| 9.00 | NDS-Silicon / Surge Arrestor | 30 | Nos. | 4,625 ₹1.4 L | 4,400 ₹1.3 L | 4,500 ₹1.4 L |
| 10.00 | 11 KV Tension Mid Span Jointing Kit for Covered Conductor | 60 | Nos. | 10,950 ₹6.6 L | 10,400 ₹6.2 L | 10,700 ₹6.4 L |
Tender Value
₹60.1 Cr
EMD Value
₹1.5 Cr
Closing Date
28 Jun 2023, 4:00 pmClosed
Chief Engineer cum Nodal Officer (RDSS)
Conference Hall, Top Floor, Kazi Road, Power Deptt
Replacement of existing HT overhead conductor lines with covered conductor and replacement of old/ frayed lt Conductor (lt bare to LT bare and LT AB cable) under revamped Reforms-based and results-linked, distribution sector scheme
2023_EPDsi_668_1
88/RDSS/WORK/POWER/GOS/ACE-II
Open Tender
Electrical Works
730 days
Gangtok, Pakyong, Gylashing, Soreng, Mangan, Namch
Please refer Tender documents.
7 documents required · 7 mandatory
₹2 L
PCE cum Secretary Power Deptt Sikkim
₹1.5 Cr
1 Sept 2023
2 Jun 2023
29 Jun 2023
2 Jun 2023
28 Jun 2023
2 Jun 2023
Amount
11 KV FEEDER RELACEMENT WITH 99 SQMM COVERED CONDUCTOR
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 99sqmm Conductor including all nuts & bolts complete without arms.
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
Insulating Piercing Connector
"T" joint tap off with Busbar
NDS-Silicon / Surge Arrestor
11 KV Tension Mid Span Jointing Kit for Covered Conductor
11 KV Termination Kit for Covered Conductor
Covered conductor 99 Sq. mm.
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for 99sqmm Conductor
M.S.channel 75X40X6mmX2.2 m long for DP.
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
11 KV FEEDER RELACEMENT WITH 70 SQMM COVERED CONDUCTOR
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 70 sqmm Conductor including all nuts & bolts complete without arms.
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
Insulating Piercing Connector
"T" joint tap off with Busbar
NDS-Silicon / Surge Arrestor
11 KV Tension Mid Span Jointing Kit for Covered Conductor
11 KV Termination Kit for Covered Conductor
Covered conductor 70 Sq. mm.
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for 70 sqmm Conductor
M.S.channel 75X40X6mmX2.2 m long for DP.
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
11 KV FEEDER RELACEMENT WITH 50 SQMM COVERED CONDUCTOR
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 50 sqmm Conductor including all nuts & bolts complete without arms.
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
Insulating Piercing Connector
"T" joint tap off with Busbar
NDS-Silicon / Surge Arrestor
11 KV Tension Mid Span Jointing Kit for Covered Conductor
11 KV Termination Kit for Covered Conductor
Covered conductor 50 Sq. mm.
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for 50sqmm Conductor
M.S.channel 75X40X6mmX2.2 m long for DP.
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
LT Bare TO LT ABC (3X95+1X50+1X16)SQ.MM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 95 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT Bare TO LT ABC(3X70+1X50+1X16)SQ.MM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 70 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT Bare TO LT ABC(3X50+1X35+1X16)SQ.MM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 50 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT BARE TO LT ABC(3X35+1X35+1X16)SQMM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 35 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT BARE TO LT ABC(3X25+1X16)SQMM
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 25 Sqmm + 1 x 16 sqmm insulated neutral cum Messenger
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
LT BARE TO LT BARE(3-PH 5 WIRE AAC ANT 50 SQMM)
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
LT shackle insulator 3"x3 1/2".
'D' clamp complete with pin, washers, nuts & bolts.
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm
AAC ANT conductor 50 sq.mm.
No. 12 SWG G.I wire for continuous earth wire
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
Danger Board 440 Volts.
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
Painting of poles with Aluminium paint @1 Ltr./pole.
G.I Barbed wire @ 2Kg/pole.
LT BARE TO LT BARE(1-PH 2 WIRE AAC GNAT 25 SQMM)
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
LT shackle insulator 3"x3 1/2".
D' clamp complete with pin, washers, nuts & bolts.
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm anchor plate.
AAC GNAT conductor 25 sq.mm.
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
Danger Board 440 Volts.
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
Painting of poles with Aluminium paint @1 Ltr./pole.
G.I Barbed wire @ 2Kg/pole.
LT BARE TO LT BARE(3-PH 4 WIRE AAC GNAT 25 SQMM)
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
LT shackle insulator 3"x3 1/2".
D' clamp complete with pin, washers, nuts & bolts.
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm anchor plate.
AAC GNAT conductor 25 sq.mm.
No. 12 SWG G.I wire for continuous earth wire
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
Danger Board 440 Volts.
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
Painting of poles with Aluminium paint @1 Ltr./pole.
G.I Barbed wire @ 2Kg/pole.
Description of Work / Item(s)
Amount
11 KV FEEDER RELACEMENT WITH 99 SQMM COVERED CONDUCTOR
Equipment
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 99sqmm Conductor including all nuts & bolts complete without arms.
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
Insulating Piercing Connector
"T" joint tap off with Busbar
NDS-Silicon / Surge Arrestor
11 KV Tension Mid Span Jointing Kit for Covered Conductor
11 KV Termination Kit for Covered Conductor
Covered conductor 99 Sq. mm.
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for 99sqmm Conductor
M.S.channel 75X40X6mmX2.2 m long for DP.
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
Associated Civil Works
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
11 KV FEEDER RELACEMENT WITH 70 SQMM COVERED CONDUCTOR
Equipment
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 70 sqmm Conductor including all nuts & bolts complete without arms.
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
Insulating Piercing Connector
"T" joint tap off with Busbar
NDS-Silicon / Surge Arrestor
11 KV Tension Mid Span Jointing Kit for Covered Conductor
11 KV Termination Kit for Covered Conductor
Covered conductor 70 Sq. mm.
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for 70 sqmm Conductor
M.S.channel 75X40X6mmX2.2 m long for DP.
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
Associated Civil Works
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
11 KV FEEDER RELACEMENT WITH 50 SQMM COVERED CONDUCTOR
Equipment
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 50 sqmm Conductor including all nuts & bolts complete without arms.
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
Insulating Piercing Connector
"T" joint tap off with Busbar
NDS-Silicon / Surge Arrestor
11 KV Tension Mid Span Jointing Kit for Covered Conductor
11 KV Termination Kit for Covered Conductor
Covered conductor 50 Sq. mm.
G.I. Wire 4 mm (8-SWG) for Continuous Earth
PG Clamp for 50sqmm Conductor
M.S.channel 75X40X6mmX2.2 m long for DP.
Back clamps of 75x8mm M.S. flat for holding channel.
M.S. nuts & bolts of 16mm dia.X 40mm length.
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
Red oxide paint @ 2 ltr/ pole
Aluminium paint @ 1.5 ltr / pole
G.I. Barbed Wire
11 kV Caution Board
G.I. Wire 4 mm (8-SWG) for Continuous Earth
Associated Civil Works
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
LT Bare TO LT ABC (3X95+1X50+1X16)SQ.MM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 95 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT Bare TO LT ABC(3X70+1X50+1X16)SQ.MM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 70 Sqmm + 1 x 50 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT Bare TO LT ABC(3X50+1X35+1X16)SQ.MM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 50 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT BARE TO LT ABC(3X35+1X35+1X16)SQMM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 35 Sqmm + 1 x 35 Sqmm insulated neutral cum Messenger + 1 x 16 sqmm, 1.1 KV
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT BARE TO LT ABC(3X25+1X16)SQMM
Equipment
8.5 Mtr STP complete with nuts & bolts-410 SP21
Tension Clamp for Dead End for L.T A B Cable
Suspension Clamp for L.T A B Cable
Tension Clamp for Dead End with Attachment
Clamps for Neutral
Piercing Connector TYPE -I, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
Piercing Connector TYPE -II, 1P/3P (Main 16-50 sqmm Tap Off 16-50 Sqmm)
LT Air Bunched Cable 3 x 25 Sqmm + 1 x 16 sqmm insulated neutral cum Messenger
Stay set including 16 mm Dia x 1.8 mtr Long Rod, and 110 x 75 x 6 mm Anchor Plate complete with 7/12 SWG Stay Wire
Back Clamps 75 x 8 mm flat
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
Red Oxide Paint
Aluminium Paint
Anti Climbing Device (Barbed Wire)
440 Volt Caution Board
Associated Civil Works
Concreting of 8.5 STP
Concreting of Guy Assy Sets
LT BARE TO LT BARE(3-PH 5 WIRE AAC ANT 50 SQMM)
Equipment
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
LT shackle insulator 3"x3 1/2".
'D' clamp complete with pin, washers, nuts & bolts.
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm
AAC ANT conductor 50 sq.mm.
No. 12 SWG G.I wire for continuous earth wire
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
Danger Board 440 Volts.
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
Painting of poles with Aluminium paint @1 Ltr./pole.
G.I Barbed wire @ 2Kg/pole.
Associated Civil Works
Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix.
Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit.
LT BARE TO LT BARE(1-PH 2 WIRE AAC GNAT 25 SQMM)
Equipment
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
LT shackle insulator 3"x3 1/2".
D' clamp complete with pin, washers, nuts & bolts.
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm anchor plate.
AAC GNAT conductor 25 sq.mm.
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
Danger Board 440 Volts.
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
Painting of poles with Aluminium paint @1 Ltr./pole.
G.I Barbed wire @ 2Kg/pole.
Associated Civil Works
Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix.
Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit.
LT BARE TO LT BARE(3-PH 4 WIRE AAC GNAT 25 SQMM)
Equipment
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
LT shackle insulator 3"x3 1/2".
D' clamp complete with pin, washers, nuts & bolts.
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm anchor plate.
AAC GNAT conductor 25 sq.mm.
No. 12 SWG G.I wire for continuous earth wire
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
Danger Board 440 Volts.
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
Painting of poles with Aluminium paint @1 Ltr./pole.
G.I Barbed wire @ 2Kg/pole.
Associated Civil Works
Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix.
Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit.
Description of Work / Item(s)
Development of Distribution Infrastructure
NORDEN DORJEE SANGDERPA
SUNIL KUMAR AGARWAL
NORDEN DORJEE SANGDERPA
SUNIL KUMAR AGARWAL
NORDEN DORJEE SANGDERPA
SUNIL KUMAR AGARWAL
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid