Restoration of fire-fighting system at IOC Lodhi Road, New Delhi 110003

Providing and laying integral cement based treatment for water proofing on horizontal

surface at all depth below ground level for under ground structures as directed by

Engineer-in-Charge and consisting of : (i) Ist layer of 22 mm to 25 mm thick approved

and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1

cement : 3 coarse sand) including applying of twice ( at base and top of mortar )

cement slurry @ 2.2kg/m2 (each time) mixed with water proofing compound

conforming to IS:2645 in the recommended proportion over the leveling course

(leveling course to be paid separately). Joints sealed and grouted with cement slurry

mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3

(1 cement: 3 coarse sand) mixed with water proofing compound in recommended

proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size

spreading @ 8 cudm/ sqm thoroughly embedded in the 2nd layer.

22.1.1 Using rough kota stone. sqm 150 1515.6 227340

Water proofing roof of Pump room

Providing and laying water proofing treatment on roofs of slabs by applying cement

slurry mixed with water proofing cement compound consisting of applying: (a) after

surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/sqm.

(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps

of joints of fibre cloth should not be less than 10 cm.

22.6 (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm sqm 490 688.92 337570.8

mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @

1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for

48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked

into groove in parapet all around.

(d) fourth and final layer of brick tiling with cement mortar (which will be paid for

separately. For the purpose of measurement the entire treated surface will be

Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc

consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75

kg/sqm of cement admixed with water proofing compound conforming to IS. 2645

and approved by Engineer-in-charge over the RCC slab including adjoining walls upto

300 mm height including cleaning the surface before treatment. (b) Laying brick bats

with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement

mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of

cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge to required

slope and treating similarly the adjoining walls upto 300 mm height including rounding

of junctions of walls and slabs. (c) After two days of proper curing applying a second

coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing

the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse

sand) admixed with water proofing compound conforming to IS : 2645 and approved

by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer

of plaster and finally finishing the surface with trowel

Plaster of Paris

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface

prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required

to give an even shade

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS/HFFR

1.54 PVC insulated copper conductor single core cable in

surface/ recessed steel conduit, and earthing the

point with 1.5 sq. mm FRLS/HFFR PVC insulated

copper conductor single core cable etc. as required.

1.54.3 Group A Point 5 914 4570

Digitally signed by AMIT

LED Batten light (System lumen efficacy ≥105 <120

lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted

Batten light of following body material and construction as per IS : 10322 with driver

(Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage

AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal

surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.

F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver

& electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen

maintained till life

8.9 ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard

Deviation Colour Matching) <3, Maximum power consumption should not more than

the specified rating and Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.

complete in all respect i/c external connections with 1.5 sq

mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen

efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required

for LED fixtures as per BIS shall be submitted. Shape size

and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess,

including providing and fixing 2 nos. 3 pin 5/6 A

modular socket outlet and 2 nos. 5/6 A modular

switch, connections etc. as required. (For light plugs

to be used in non residential buildings).

Supplying & fixing suitable size GI box with modular

plate and cover in front on surface or in recess

1.57 including providing and fixing 25 A modular socket Each 1 807 807

outlet and 25 A modular SP MCB, "C" curve including

connections, painting etc. as required.

MR L.T. Cable Supply

Supply of following sizes of 1.1kV grade multicore aluminium conductor XLPE

armoured power cable as per IS: 7098 ammended upto date as per the following

MR LT Cable laying

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

grade of following size direct in ground including excavation and refilling the trench

etc as required, but excluding sand cushioning and protective covering.

10.3.2 Above 35 sq. mm and upto 95 sq. mm Mtr. 120 276 33120

10.3.3 Above 95 sq. mm and upto 185 sq. mm Mtr. 50 298 14900

10.3.3 Above 185 sq. mm and upto 400 sq. mm Mtr. 192.8705 364 70204.862

Supplying and making end termination with brass compression gland and aluminium

11.1 lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor

cable of 1.1 KV grade as required.

MR Domestic Water Meter

Supply, Installation, Testing and Commissioning (SITC) of Water Meter, conforming

to ISO 4064 Class-B, with flanged end connections, dry dial magnetic drive register,

suitable for measurement of water, complete with gaskets, nuts, bolts, jointing

materials and all accessories required for proper installation. The meter shall have a

nominal flow rate (Qn) of 60 m³/hr, maximum flow rate (Qmax) of 120 m³/hr,

transitional flow rate (Qt) of 12 m³/hr, and minimum flow rate (Qmin) of 1.8 m³/hr.

The work shall include testing, calibration (if required), commissioning, and handing

over complete in all respects as per the manufacturer's recommendations and the

approval of the Engineer-in-Charge.

MR Chequred Plate

Digitally signed by AMIT

Providing, fabricating, supplying, and fixing M.S. chequered plate covers over

trenches, pits, tanks, channels, etc., of required sizes and shapes, comprising M.S.

chequered plates of approved thickness fixed to M.S. angle/channel/frame sections,

including cutting, straightening, bending, welding, grinding, drilling, making lifting

handles, surface preparation, one coat of red oxide zinc chromate primer and two

coats of synthetic enamel paint of approved shade, complete in all respects as per

directions of the Engineer-in-Charge. The item includes all materials, labour, tools &

plants, consumables, loading, unloading, transportation, erection, and all incidental

works required for completion.

5 mm thick Sqm 10 5100 51000

MR Water Level Indicator

Providing, supplying, installing, testing and commissioning of water level indication

and alarm system for 5 Nos. (04 Nos. Over head & 01 Nos. Under Ground) water

storage tanks, comprising low, medium and high level sensing arrangement in each

tank, electronic water level controller/indicator panel, audio alarm (buzzer) for full Set 1 110000 110000

tank indication, sensors/electrodes, control wiring, power supply, interconnections,

mounting accessories, conduits, junction boxes, termination, testing, calibration and

commissioning, complete in all respects as required and as directed by the Engineer-in-

Charge. The item shall include all materials, labour, tools, tackles, transportation and

accessories necessary for satisfactory operation of the system.

MR Exhaust Fan

Providing, supplying, installing, testing and commissioning (SITC) of Axial Flow Fan

suitable for ventilation/exhaust application having minimum air delivery capacity of

3500 CFM (approximately 5950 CMH) at 15–25 mm WG static pressure, complete

with dynamically balanced cast aluminium/FRP aerofoil impeller, heavy-duty powder-

coated steel casing, TEFC squirrel cage induction motor of suitable rating (1.0 HP to

1.5 HP), IP55 protection, Class-F insulation, operating on 220V/415V, 50 Hz AC supply,

complete with suction and discharge side safety guards, mounting frame/brackets,

anti-vibration pads, foundation bolts, control switch, interconnecting wiring from

nearest power source, earthing, alignment, testing and commissioning. The item shall

include all materials, accessories, labour, tools and tackles, transportation, installation

and all incidental works required for satisfactory operation, complete in all respects as

per manufacturer's specifications and directions of the Engineer-in-Charge.

Total (DSR+NDSR) 16697890.00

Buyback (Fire Fighting Pumps, Old pipe & Panel) 210000.0

G-total 16487890.0

Digitally signed by AMIT