Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.4 L+₹1.8 L (8.32%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹25.0 L+₹3.4 L (15.6%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹26.0 L+₹4.4 L (20.3%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AFA),HYDERABAD
GE(AFA),HYDERABAD,AFA,DUNDIGAL
ADDITION/ALTERATION TO P-32 BUILDING AT AFA HYDERABAD
2023_MES_581762_1
8323/E8
Open Tender
Civil Works - Others
Item Rate
180 days
GE(AFA)
As per Tender Documents
4 documents required · 4 mandatory
₹500
GE(AFA)HYDERABAD
₹50,000
Yes
18 May 2023
18 Feb 2023
15 Mar 2023
18 Feb 2023
13 Mar 2023
1 Mar 2023
18 Feb 2023 - 26 Feb 2023
Amount
Taking down chowkats or steel /wooden/aluminium window /ventilators /door frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or steel /wooden/aluminium window /ventilators /door frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed.
Taking down cement plaster on Brick or Stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish to a distance exceeding 2.5 km and n.exc.5 km complete all as specified and directed.
Demolition of Brick/stone masonry built in cement mortar of any description, etc and removing unserviceable debris to a distance exceeding 2.5 km and n.exc.5 km complete all as specified and as directed
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for foundation,Plinth protection, filling and mass concrete complete and removing debris to a distance exceeding 2.5 km and n.exc.5 km complete all as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for RCC Chajjas/Roof projections etc and removing debris to a distance exceeding 2.5 km and n.exc.5 km complete all as specified and as directed. (Reinforcement cut as required to facilitate demolition)
Dismantling floor hearth or existing wall tiling incl cement mortar bedding (but not backing) including removal of debris to a distance exceeding 2.5 km and n.exc.5 km complete complete all as specified and as directed
Cutting opening, through brick wall for door, window and other opening or enlarging existing opening converting window into door opening etc or cutting out defective brick work for under-pinning including providing, fixing and removing shoring ,cleaning and stacking bricks, removing surplus serviceble bricks ,hard core, etc complete all as specified and as directed
M&L for Forming jambs, etc. to openings in Cement mortar 1:4 or cement lime mortar 1:2:9, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified.
M&L for Making good under cills or over arches, lintels and bressummers in Cement mortar 1:4 or cement lime mortar 1:2:9. including all pinning when necessary complete all as specified.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed.
Taking up or down upto 25 mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.
Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick of excavated soil complete all as specified and as directed.
Removal of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
M&L for anti-termite treatment to the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area in foundation complete all as Specified and directed.
M&L for anti-termite treatment to the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), etc complete all as specified and as directed
M&L for anti-termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M&L for anti-termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area etc complete all as directed.
M &L for anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall etc complete all as directed.
M & L cement concrete 1:4:8( Type D2) using 40 mm graded stone aggregate, in foundation, filling and mass concrete complete all as specified and directed.
M&L for pre-cast cement concrete block masonry of (1:3:6) type C1 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
M&L for Formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work, of rough finished flat surface of concrete, complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1(using 20 mm graded stone aggregate), as in foundation Beams,plinth beams,bases for columns, etc, basement slabs, under-reamed piles and mass concrete and similar works etc complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1(using 20 mm graded stone aggregate), as in Beams, lintels over 1.50m span , and similar works etc complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slab ,floor slab,landing and similar work not exc 200 mm thick , complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded stone aggregate), as in Slabs supported on walls, beams and coloums in floors roof landing, balcones conopes, deck slab and in shelves complete all as directed .
Formwork to chajjas, troughs and similar items including edges complete all as specified and directed.
M & L Providing Reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded aggregate), as in chajjas complete all as directed .
M&L for precast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man holes cover slabs,shelves platform slabs etc including necessary form work set in CM 1:4 , complete all as specified and as directed. Note : Reinforcement shall be measured seperately.
M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
M&L for mild steel TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
S&F mild steel TMT bar 6 mm to 10 mm dia. cut to length , bent to shape as required, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia.as in stirrups, spacers and binders, complete all as specified and directed.
S&F PVC (SWR) pipes type 'B'110 mm bore single socketted in any length laid in trenches or floors,fixed to walls etc complete all as specified and as directed
S&F PVC (SWR) pipes type 'B' 75 mm bore single socketted in any length laid in trenches or floors or in walls, etc complete all as specified and as directed
S&F PVC (SWR) bends any radius suitable for 110mm bore pipe, complete all as specified and as directed
S&F PVC (SWR) bends with oval access doors any radius suitable for 110mm bore pipe, complete all as specified and as directed
S&F PVC (SWR) branch piece, 110mm,single (single Y or T) equal or unequal complete all as specified and as directed.
S&F PVC (SWR) branch piece , 110mm, Double (double Y) equal or unequal complete all as specified and as directed.
S&F PVC (SWR) 'P’ trap110mm complete all as specified and as directed.
S&F PVC (SWR) bends any radius suitable for 75mm bore pipe, complete all as specified and as directed
S&F PVC (SWR) bends with oval access doors any radius suitable for 75mm bore pipe, complete all as specified and as directed
S&F 75mm dia PVC (SWR) floor/nahani trap plain with grating including jointing with solvent cement and jointing to waste pipe, mounted in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
Supply and fix Salt glazed stoneware gully trap, type Q 125x100mm mounted with and including PCC (1:2:4) complete all as specified and as directed.
S&F 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.
Cutting chases, pinning in stone or brick walls and making good to facings where required and pointing in cement mortar 1:3 and cutting not exc 10 cm girth etc complete all as specified and as directed.
S&F 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.
S&F 25 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.
M & L for rendering 15 mm thickin CM 1:4 on other than fair faces of brick wall mixed with WPC as per manufacturers instruction , fair finished surfaces to even and smooth without using extra cement, complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately under respective items.
M&L for Rendering 15 mm thick on concrete or brick work surfaces in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces of ceilling, finished even and smooth (without using extra cement) of any description and in any position, with necessary scaffoldings complete all as specified and as directed by theEngineerin-Charge.
M&L Joint free Non Skid ceramic colour tiles of premium quality 7 to 8mm thick,(square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including screed bed 15mm thick in CM (1:6) ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour etc complete as specified.
M&L Joint free Glazed coloured ceramic tiles of digital quality in vertical surfaces of dados, skirting etc of size 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including backing coat/rendering in CM (1:4) 10mm thick complete all as specified and directed (Note: Colour of tile will be finalized by Engr-In-Charge)
S&F of 18 to 20 mm thick Granite work (table rubbed and polished) black coloured, for WHB platform and like laid over and including screed bed 15 mm thick in cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.
M&L for marble work 18 to 20 mm thick of any shade other than white & black (table rubbed and polished) in window cills and like laid over and including screed bed 15 mm thick in cement mortar (1:4) ,pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and as directed.
S&F of 18 to 20 mm thick Granite work (table rubbed and polished) black coloured,for wall lining (veneering to wall ) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.
M&L rounding to edges of stone slabs one edge, in cooking platforms, shelves etc complete all as specified ans directed.
S & F Powder coated aluminium frame/ sections (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (fixed partitions) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e.at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge. Note: Glazing will be measured seperately
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge. Note: Glazing will be measured seperately
S & F 12 mm thick Toughened glass as in hinged doors / sliding doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required, complete all as specified and directed.
S&F Powder coated aluminium ventilators of approximate size 600mm x 900mm, top hung type made out of anodised aluminium extruded section of thickness not less than 1.50 mm, suitable aluminium hinges, aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles and including all other required fittings as per standard engg. practice, complete all as specified and directed. Note: Glazing will be measured seperately
S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel / H or F sections complete fixed with steel screws all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed
S&F 4 mm thick frosted glass, pin head type and glazing with oil putty in squares n .exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in -Charge.
S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints (including holdfasts fixing and making good with PCC type B1 1:2:4 (using 20 mm graded stone aggregate etc and neceesary accessories) complete all as specified and as directed.
S & F 40 mm thick, Flush shutters, HDF type both side veneered finished solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed by Engr-in-Charge. Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed
S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications all as specified and as directed
S &F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel pin, anodised and fixed, Type C-21, complete all as specified and directed.
Supply and fix butt hinges of 100mm size, medium weight cold rolled mild steel and fixed complete all as specified and as directed.
Supply and fix 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.
Supply and fix tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed.
Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description including preparation of surfaces, not otherwise described over 10 cm width or girth complete all as specified and as directed.
M & L Preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint), complete all as specified and directed.
M & L Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint ), complete all as specified and directed.
M&L Cement concrete type B-1 1:2:4 (20mm graded aggregate) in roof padding concerte of average 50 mm thick mixed with liquid water proofing compound as per manufacturers instructions complete all as specified and as directed. Note: WPC will be measured & paid separately under relevant Item
M & L Cement concrete type B-0 1:2:4 (12.5mm graded stone aggregate) as in haunching concrete complete all as specified and as directed
M&L for Rendering 10mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surface is still green including finishing even and smooth complete all as directed Note: WPC will be measured & paid separately under relevant Item
Cleaning the roof surfaces and applying oil bound bitumen primer @0.20 Kg per Sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centgrade, longitudinal tensile strength not less than 800N per 5 cm tearing strenght of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch.and Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions complete as directed
M&L for applying one coat of solar reflective bituminous Aluminium paint over the surfaces of APP water proofing membrane @ 0.1 Kg/Sqm complete all as specified and as directed.
Supply only Liquid water proofing compound.
S&F 1000 ltrs of capacity Rotational moulded polyethylene double layered water storage tanks with screw type cover (cylindrical vertical with closed top) hoisted and fixed in position etc complete all as specified in SSR Part I and as directed.
Supply and fix 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.
S&F in repair of Gun-metal globe or gate valves 20mm bore dia with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.
S&F in repair of Gun-metal globe or gate valves 25mm bore dia with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.
S&F in repairs wall Hung EWC of make : Cera (capitol) of snow white colour size (530x350x375 mm) Cat. No. S1044150 P Trap or equivalent with duroplast slim soft close seat cover complete all as specified and directed by Engineer-in-Charge.
S&F in repairs concealed cistern set with full frame including all accessories of Make : Cera (Chevron) Cat. No. B1110111 or equivalent (without Knob) complete and as specified and directed.
S&F in repairs Q type shine finish Knob for concealed chevron cistern set including all accessories of Make : Cera (Chevron) Cat. No. B11210104 or equivalent complete all as specified and directed.
S&F in repairs Health faucet ABS body with 1 meter SS braided connection pipe of make : Cera Cat. No. F8030109AB or equivalent complete all as specified and directed.
S&F in repairs Toilet paper holder with flap guard of make : Cera (Hera range) Cat. No. F5007110 or equivalent complete all as specified and directed.
S&F in repairs Grating doom of 100 mm dia of Stainless steel hinged or openable type ,fixed with suitable solvent cement complete all as specified and directed.
S&F in repairs 2-Way bib cock with side handle, wall flange and aerator of make: Cera (winslet) Cat. No. F1099161 or equivalent complete all as specified and directed.
S&F in repairs table top Wash Hand Basin of size 750 x 380 x 130 mm of snow white colour of make : Cera (Catmega) Cat. No. S2020160 or equivalent complete all as specified and directed.
S&F in repairs 32 mm waste coupling with ceramic pop-up push type (full threaded) of make: Cera Cat. No. F8050351 or equivalent complete all as specified and directed.
S&F in repairs polyamide braided connection pipe 12 mm dia, 450 mm length (02 piece set) of make: Cera Cat. No. F8070402 or equivalent complete all as specified and directed.
S&F in repairs single lever Wash hand Basin mixer with 450 mm braided connection pipe (without pop up) of Make : Cera (winslet) Cat. No. F1099451 or equivalent complete all as specified and directed.
S&F in repairs of High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors including concealing the pipe as per site requirement complete all as specified and directed.
S&F in repairs angle cock with wall flange of Make : Cera (winslet) Cat. No. F1099201 or equivalent complete all as specified and directed.
S&F in repairs soap dish of make : Cera ( Hera range) Cat. No. F5007106 or equivalent complete all as specified and directed.
S&F in repairs Tumbler holder of Make : Cera (Hera range) Cat. No. F5007107 or equivalent complete all as specified and directed.
S&F in repairs Liquid soap dispenser of make : Cera (Hera range) Cat. No. F5007111 or equivalent complete all as specified and directed.
S&F in repairs Towel ring of make : Cera (Hera range) Cat. No. F5007105 or equivalent complete all as specified and directed.
S&F in repairs Towel rail 600 mm long of make : Cera (Hera range) Cat. No. F5007103 or equivalent complete all as specified and directed.
S&F in repairs Towel rack 600 mm long of make : Cera (Hera range) Cat. No. F5007101 or equivalent complete all as specified and directed.
S&F in repairs wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe of make : Cera (Winslet) Cat. No. F1099403 or equivalent complete all as specified and directed.
S&F in repairs overhead rain shower of stainless steel of size 300 x 300 mm of make: Cera Cat. No. F7010109SS or equivalent complete all as specified and directed.
S&F in repairs overhead shower arm 230 mm long with wall flange of make : Cera Cat. No. F7040103 or equivalent complete all as specified and directed.
S&F in repairs hand shower of stainless steel of size 100 x 125 mm with three flow, wall hook and 1.5 meter hose of make: Cera Cat. No. F7030308AB or equivalent complete all as specified and directed.
S&F in repairs corner glass shelf with 2 racks of Make : Cera (Oceana range) Cat. No. F5005201 or equivalent complete all as specified and directed.
S&F in repairs glass shelf of Make : Cera Cat. No. F5001114 or equivalent complete all as specified and directed.
S&F in repairs 5 mm thick glass mirror of size 800 x 600 mm with double coat for protection and longevity, 5 mm clear glass shelf with stainless steel rail and silver plating on the back for better reflection of Make : Cera Cat. No. B3510149 or equivalent complete all as specified and as directed.
S&F in repairs 6 mm thick printing glass shower partiotion of size 1000 x 1800 mm (One door), chrome profile with plastic grey handle, 180 degree swinging glasses & adjustment about 1.5 Cm each side including all necessary accessories and fittings required for installation complete of Make : Cera (Cadmega) cat. No. B2510117 or equivalent all complete and as specified..
S&F 12mm thick Toughened stained glass door with one see through line in center, of approx size 1.00m x 2.10m (single leaf) 03 Nos with approved design/ Air force logo not less than 0.30 Sqm on each leaf, white on white deep acid etching and including fixed with following fiitings complete for each door, all as specified and directed by Engr In Charge. a)Door set top hinges-01Nos, b) Door set bottom hinge pivot-01Nos, c) Door set lock - 01Nos, Door set floor spring - 01Nos, e) Glass Handle of 300mm size-02Nos. (it includes all necessary hardwares required for functioning)
S&F Powder coated (Thickness not less than 50micron) Aluminium Three Track Sliding windows of Approximate size 1800mm x 1200mm made out of anodised aluminium extruded section Outer Frame with gutter 92x45.5x1.50mm and Shutter section 40x18x1.50mm fully glazed including 5mm thick sheet glass, rubber gasket, Aluminium beading, suitable fancy type handles, locking device, rollers and all other required Hardware fittings as per standard Engg. practice, complete all as specified and directed.
Complete removal of the existing treatment on ceiling and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for preparing of newly plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of alkali resistant prime including preparation of surfaces complete all as specified and as directed.
M & L Complete removal of existing treatment and applying two coats of oil bound distemper on walls over a coat of alkali resistant priming paint over the coat of 3 mm thick wall care putty on wall, complete all as specified and directed.
Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion on walls over a coat of Alkali resistant priming paint over the coat of 3mm thick wall care putty etc complete all as specified and as directed
M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer & bio wash on walls, all complete and as directed by Engineer-in-Charge.
M&L preparation of old decorated surfaces of wall including washing and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer all complete and as directed by Engineer-in-charge.
M&L for Structural steel, rolled section (ISLB-200) such as , joist, beam, channel, angle, tee, in any lengths of grade Fe 410-W (Gde-E250) quality-A for structural support to slabs etc complete all as specified and as directed by Engineer-in- charge.
M&L for Mild steel plates, plain or chequered, 5mm thick or over in thickness in any sizes of grade Fe 410-W (Gde-E250) quality-A for structural support to slabs etc complete all as specified and as directed by Engineer-in- charge.
M&L for epoxy grouting in gaps between any type of structural members in any position upto 300 mm girth/depth as per site requirements all complete and as directed by Engineer-in-charge.
M&L for propping in the slab and providing under pinning to ensure safety of the adjoining work or property during dismantling/demolition including providing temporary enclosures or partitions and necessary scaffilding with proper cloth covering as per site requirements all complete and as directed by Engineer-in-charge.
Cutting holes into or through stone wall built in cement mortar or cement lime mortar and walls of cement concrete, of superficial area exc 150 sq. cm but n. exc. 400 sq cm, including removing rubbish off the permisescomplete all as specified and directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for SGSW drain pipes complete and including removing rubbish to a distance exc 2.5 km and not exceeding 5 km complete all as directed.
Demolition, breaking up and removal of 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and in any position including removing rubbish to a distance exc 2.5 km and not exceeding 5 km, all as specified and as directed.
M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 100 mm dia,including packing under, and hunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.
M&L for 100 mm dia pipe (Grade ‘A’ pipe) Salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 complete all as specified and directed.
M&L for brick work for sewage chamber with sub class `B' brick (old size bricks) straight or curved on plan exceeding 6 m mean radius built in CM 1:4, complete all as specified and as directed.
M&L for PCC 1:2:4, type B-0 (20 mm graded stone aggregate) as in copings for sewage chamber, bed plates, valley gutters, kerbs etc including necessary form work complete all as specified and as directed.
M&L PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in surface channels for sewage chambers and benching at bottom of drains including forming fair finishes to drains/channels etc complete all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed..
M&L 75 mm thick PCC (1:4:8) type D2 (40 mm graded aggregate) as in sub base for floors all as specified and as directed.
M & L 25 mm thick cement concrete type B-1, 1:2:4 mix, ( 20 mm graded aggregate ) as in sub base of floor finishes, complete all as specified and directed.
M & L for Granite (of any type) tiles 20mmthick machine cut in flooring, bedded and jointed with grey cement slurry and pointed with white cementwith admixture of pigment tomatch the shade of granite stoneincluding grinding and polishing, etc laid over and including screed bed (1:6), 15mm thick complete all as specified and directed .
M & L for 20mm thick Granite (of any type)tiles machine cut, in skirting/ dado laid over and including backing coat/ plastering in cm (1:4), 10mm thick and jointed with grey cementslurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grindingand polishing complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in top layer of plinth protection, path etc., finished even and smooth without using extra cement complete all as specified and as directed.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A, all as specified and as directed.
M&L for Cutting into existing manholes for connecting new drains upto 225 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all complete and as specified.
Taking down carefully un serviceable point wiring of light points, fan, socket out let on TW battens/PVC pipes/casing & caping including material like sockets, switches, ceiling roses, regulators, light fittings etc and removing the materials from site and making good the disturbed portion of walls/floors ceiling etc complete all as specified and as directed.
Taking down unserviceable MCBs, DBs, Main switches complete all as specified and directed.
Taking down unserviceable submain wiring any size complete all as specified and directed.
M & L for Point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable FRLS with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVC conduit of suitable size but not less than 20mm dia. and all accessories fixed to be consealed in wall & surface of the roof etc., including modular type terminal boxes made out of Galvanised sheet of thickness should be not lessthan 0.9mm thick for fixing of modular switches, modular fan regulators, modular socket outlet etc along-with suitable modular plate for housing switches, etc complete all as specified and as directed for :-
(a) One light point controlled by one switch
(b) One Fan point controlled by one switch
(c) One three pin socket 5 Amps plug point independent
(d) One three pin socket 5 Amps plug point on same board
All as per Ser item No 146 above but with 2.5 sqmm copper cable in and including PVC conduit complete all as specified and as directed for 15A socket.
S&F of ceiling rose, three terminal, PVC/polycarbonate, insulated body, ISI marked complete all as specified and as directed.
S&F of Modular Switch type polycorbonate white 1 way, 6A, 240Volts complete all as specified.
S&F of Modular Socket outlet polycorbonate white 10A - 2/3 pin complete all as specified.
S&F of Modular Switch type polycorbonate white 1 way, 16A, 240Volts complete all as specified.
S&F of Modular Socket outlet polycorbonate white 20A - 2/3 pin complete all as specified.
S&F 12 W decorative wall mounted light fitting with adjustable light angle, all accessories internally pre-wired connecting up with twin core twisted flexible copper conductor cable white colour complete all as specified and directed by engr- in -charge. Make- Model No- LHFOAKD2TZ1D060 and equivalent make Havells / Phillips / Bajaj / CG/ Luker
S&F surface type LED mirror light 12 Watt with inbuit driver 230 V with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size acomplete all as specified and directed by Engineer-in-charge Model No- Luker Cat No- LMCL12 or equalent make of Havells / Phillips / Bajaj / CG/ Luker
M&L for Sub Main wiring with two runs of 6sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit consealed of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge. (For AC Point)
Note:-(i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.
(ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
(iv) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint.
M&L for Sub Main wiring with four runs of 16sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit concealed of suitable size with all necessary fittings, in walls/roof/floor duly earthed with two runs of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete complete all as specified and directed by Engineer-in-Charge. (ForDB to Sub DB)
Note :- (i) Necessary PVC dummy plates & rigid PVC junction boxes for maint./inspection purpose as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.
(ii) Same size wire shall be used for phase, neutral & earth conductor
(iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
(iv) Six runs of cable and one run of PVC conduit / casing caping will be measured as one uint.
M&L for Sub Main wiring with two runs of 2.5sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit / casing & caping (as per site requirement) of suitable sizewith all necessary fittings, surface in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge. (For Bldg Security Light)
Note:-(i) Necessary PVC dummy plates & PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge shall deemed to be included in the quoted rate.
(ii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.
(iii) Three runs of cable and one run of PVC conduit / casing caping will be measured as one uint.
S&F MCB DB VTPN 4 way vertical type IP -43 protection 415 V AC 50 Hz with provision for MCCB FP as incomer and MCB/RCBO/ SP/ SPN/ TPN as outgoing with tinned copper busbar neutral link earth complete all as specified and as directed. Note: MCB/MCCB will be measured seperately.
S&F of MCB DB 4 way SPN DB Double door, 230volts 50 Hz AC supply including fixed to the existing wall (concealed/surface) and making good the disturbed surface wall with the exsting wall complete all as specified and as directed.
S&F MCB SPN 6 to 32A, 10KA rupturing capacity complete all as specified and as directed.
S&F Fix MCB SP 6 to 32 A 10 KA rupturing capacity complete all as specified and as directed.
S&F MCCB 4 pole 100 Amp 16 KA breaking capacity 415 volt 4 phase supply complete all as specified and directed
M&L Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V, 50 Hz AC complete all as directed
Supply & Fixing wall mounted fan with plastic body 400 mm sweep, 1350 RPM, single phase 240 Volts, AC 50 Hz and connecting up including matching colour with the surroundings provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan , all as specified and as directed.Make- Bajaj Cat No- 250552 or equvalent
M & L Sand covering /cushioning for underground cable protection complete all as specified and directed by Engr- in Charge.
M&L for burnt bricks sub class 'B' laid perpendicular over & cushioning for cable protectioncomplete all as specified & directed at site by the Engr- in Charge.
M & L for connecting and testing for XLPE insulated, armoured heavy duty electric cable with aluminum conductor ,1100 V grade,cross-sectional area 10 Sqmm and 2 core laid in trenches including aluminium lugs as required for connection complete all as specified and directed.
S & F weather proof cable junction box of size 200 x140x 95 mm, made out of thermoplastic, having IP 66 protection for outdoor type fixed with 4 way bakelite cable busbar fixed on poles/pipes with aluminium clamps of size 25 x 3, nuts, bolts, washers etc. complete all as directed Make Sintex(Cat No . GS-JB-2014) or equivalent in Hensel, L&T.
M/S NAVEEN BUILDERS
M/s RAMA LAKSHMI CONSTRUCTIONS
S J REDDY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .