Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 CrAccepted-AOC | ₹31.7 Cr Quoted ₹32.6 Cr | L1 | Accepted-AOC The Rates Quoted by the Bidder is Below the Contract Value Hence this bid is accepted |
| 2 | L2₹33.2 CrRejected-AOC | ₹33.2 Cr | L2 | Rejected-AOC Bidder Quoted Higher Value Than L1 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not Admitted for Financial Evaluation |
| Sl No | Description | Qty | Unit | kwalityshutters L2 | Super Fabricators L1 |
|---|---|---|---|---|---|
| 1.00 | Design, drawing, fabrication, erection at site and commissioning of left main canal sluice gate as replacement of the existing corroded. | 4 | Job | 10,63,000 ₹42.5 L | 10,42,000 ₹41.7 L |
| 2.00 | Design, drawing, fabrication, erection at site and commissioning of right main canal and scour vent sluice gate as replacement of the existing canal sluice gate. | 6 | Job | 14,82,000 ₹88.9 L | 14,54,000 ₹87.2 L |
| 3.00 | Dismantling of existing old corroded spillway crest vertical gates from its respective groove portion. | 16 | Job | 1,79,000 ₹28.6 L | 1,76,000 ₹28.2 L |
| 3.01 | Design, fabrication & supply of vertical shutter including skin plate with vertical stiffeners, horizontal fabricated girders, end verticals, rear angle, connecting plates, rib plates, etc, | 16 | Job | 56,35,000 ₹9.0 Cr | 55,27,000 ₹8.8 Cr |
| 3.02 | Manufacture, supply and erection of bottom seal & side seal with fasteners for a vent size 12190x1980mm. | 18 | Job | 3,22,000 ₹58.0 L | 3,16,000 ₹56.9 L |
| 3.03 | Design, fabrication and supply of cast steel roller assembly for Spillway gates. | 16 | Job | 9,84,000 ₹1.6 Cr | 9,65,000 ₹1.5 Cr |
| 3.04 | Erection, testing & commissioning of vertical lift gate for a vent size 12190x1980mm with structural steel skin plate, horizontal girders, vertical stiffeners, wheels, lifting brackets, etc., | 16 | Job | 12,03,000 ₹1.9 Cr | 11,80,000 ₹1.9 Cr |
| 3.05 | Conducting the following minimum quality tests as per approved QAP at various stages of work to ensure raw materials. | 18 | Job | 3,05,000 ₹54.9 L | 2,99,000 ₹53.8 L |
| 4.00 | Overhauling of existing hoisting arrangements for the Spillway shutter. | 18 | Job | 1,42,000 ₹25.6 L | 1,39,000 ₹25.0 L |
| 5.00 | Overhauling of worm gear box and reduction gear box to the canal & scour sluice shutters. | 9 | Job | 1,05,000 ₹9.4 L | 1,03,000 ₹9.3 L |
Tender Value
₹32.0 Cr
EMD Value
₹16.1 L
Closing Date
22 Sept 2025, 3:00 pmClosed
The Superintending Engineer
O/o the Superintending Engineer, WRD, Lower Vaigai Basin Circle, Sivagangai-630562
Rehabilittaion of Virahanur Regulator by Replacing the Shutters,Electrical and Mechanical Arrangements across Vaigai River in Madurai south and East Taluk of Madurai District
2025_WRD_600300_1
2025_26_LVBC_22
Open Tender
Civil Works - Water Works
547 days
Sivagangai
Please refer Tender Documents
9 documents required · 9 mandatory
₹0
₹16.1 L
Yes
4 Dec 2025
5 Sept 2025
23 Sept 2025
5 Sept 2025
22 Sept 2025
5 Sept 2025
Amount
Design, drawing, fabrication, erection at site and commissioning of left main canal sluice gate as replacement of the existing corroded.
Design, drawing, fabrication, erection at site and commissioning of right main canal and scour vent sluice gate as replacement of the existing canal sluice gate.
Dismantling of existing old corroded spillway crest vertical gates from its respective groove portion.
Design, fabrication & supply of vertical shutter including skin plate with vertical stiffeners, horizontal fabricated girders, end verticals, rear angle, connecting plates, rib plates, etc,
Manufacture, supply and erection of bottom seal & side seal with fasteners for a vent size 12190x1980mm.
Design, fabrication and supply of cast steel roller assembly for Spillway gates.
Erection, testing & commissioning of vertical lift gate for a vent size 12190x1980mm with structural steel skin plate, horizontal girders, vertical stiffeners, wheels, lifting brackets, etc.,
Conducting the following minimum quality tests as per approved QAP at various stages of work to ensure raw materials.
Overhauling of existing hoisting arrangements for the Spillway shutter.
Overhauling of worm gear box and reduction gear box to the canal & scour sluice shutters.
Replacement of existing broken worm & worm gear of left main canal hoist.
Repair & replacement of broken pinion gear wheels and spur gear wheel in the transmission line.
Fabrication, supply and installation of center hoist composite enclosure by using composite panels of thickness 3mm made as a single unit.
Fabrication, supply and installation of chain hoist enclosure for hoist assembly by using composite panels of thickness 3mm made as a single unit.
Providing a dial gauge to read the movement of shutters from the deck bridge.
Repair and overhauling of electromagnetic brake for the regulator gate hoist.
Replacement of old damaged starter box.
Repair & Replacement of old damaged metal DB box to hybrid composite super structure DB box to regulator vent gate hoist.
Replacement of damaged 4 core 16 s.qmm UG aluminium cable.
Replacement of damaged 4 core 50s.qmm UG aluminium cable.
Replacement of damaged hand rails of regulator road bridge.
Providing 6mm thick composite chequered plate in the operating platform.
Providing abrasive blast cleaning using air blast cleaning with abrasive aluminium oxide/steel grits/sand.
Regulator shutter vent no. 1 to 18
Deck bridge
Providing metallising on gate/ exposed parts using flame thermal spraying equipment.
Regulator shutter vent no. 1 to 18
Application of a Protecto speciality primer coat to protect the steel structure from highly abrasive, erosive and corrosive environments.
Regulator shutter vent no. 1 to 18
Deck bridge
Application of coaltar epoxy over the primer shall be through airless spray method.
Regulator shutter vent no. 1 to 18
Deck bridge
Providing counter weight arrangements of the following size & specification. The steel box is of length 13000mm x 400x 420mm height.
Advance patch work for making up the undulation in the existing B.T surface.
Providing and laying Tack coat over BT surface using 3Kg of bitumen 60/70 for 10sqm.
Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm.0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40
Earthwork for Foundation
Supplying and filling of M-Sand
Supplying and erecting steel centering
Providing and laying in concrete Mix M-10 Grade using 20mm
Providing and laying in concrete Mix M-20 Grade using 20mm
Painting for Kerb
kwalityshutters (BID ID -1466420)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.95 MB
BOQ_717606.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid