Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹24.6 L+₹2.5 L (11.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹24.6 L+₹2.6 L (11.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
24 Jun 2024, 6:00 pmClosed
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Repair to sanitary fittings, flooring, passage, joinery, misc repair in Santan Singh Enclave and surrounding area under AGE B/R-II, GE Gurdaspur (Tibri).
2024_MES_656333_1
GE GSR-24/2024-2025
Open Tender
Civil Works
Item Rate
210 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹60,000
10 Sept 2024
28 May 2024
1 Jul 2024
28 May 2024
24 Jun 2024
12 Jun 2024
Amount
M& L Non skid dark coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 incl dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to store and rubbish off premises complete all as specified and as directed.
M&L for ceramic glazed dark shed coloured tiles of size 300x200x7mm/ 450x350x7mm thick and incl 10mm thick screed bed in cm(1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado incl dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to store and rubbish off premises complete all as specified and as directed.complete.
M& L Non skid dark Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 incl dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to store and rubbish off premises complete all as specified and as directed. complete all as spc.
M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces, fair surface, finished the surfaces even and smooth without using extra cement , including taking down cement plaster built in cement mortar all as specified & directed.
All as per Srl item No 04 above but 5mm thick on ceiling in CM 1:3
Preparation of new plastered surfaces, applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper on walls over primer, on plastered surfaces complete all as specified and directed.
All as per Srl item No 06 above but on ceiling three coats of white wash complete all as specified.
M&L One coats of OBD (Acrylic) on old decorated wall surface including preparation of surfaces complete all as specified and directed.
M& L for one coat of white wash on old treated ceiling surfaces including preperation of old surface complete all as specified and directed.
S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.
S & F in repair 150 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.
S&F Aluminium anodized barel tower bolt of extrud sec 150mm long
All as per Srl item No 12 above but 250mm long
S&F aluminium alloyed handle cast type anodized of size 100mm long.
All as per Srl item No 14 above but 150mm long
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
S&F in repair for 10mm thick corner glass of size 30cm X 30cm, with stainless steel decorative type railing on front face and fixed with 3 Nos 'D' type stainless steel brackets complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty and fixed with beads.
S&F sheet glass 4 mm thick ordinary quality , fixed with oil putty.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks of wire staples complete all as specified and as directed.
Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for reuse or removal to store complete all as specified and as directed.
All as per Srl item No 22 above but 20mm bore of pipe.
S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and as directed.
Fixing Only GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and as directed.
S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and as directed.
Fixing only GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and as directed.
S&F rotational moulded polyethylene 3-layer water storage tank of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable complete all as specified and as directed.
S&F PVC cover with fitting of PVC water tanks of capacity exc 250 litre but not exc 1000 litre complete all as specified and as directed.
S&F in repair bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair for 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed.
S&F in repair CP shower rose 125mm size with swivel joint fancy type as spd
S&F in repair 20 mm float ball valve high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed.
S&F in repair new brass spindle with nylon washer and removing leakage of water of any bib tap/stop valve suitable for 15 to 20mm bore pipe complete all as specified.
S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified.
Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required.
S&F in repair for Vitreous China wash down water closet pan (pedestal pattern) white(EWC) (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repairs plastic water closet seat, black, closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.
S & F in repair of Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified & directed
S&F in repairs brass CP Central hole basin mixer without pop up waste system with braided hoses screwed down for 15mm bore pipe all as specified & directed
S&F in repairs new brass leg with nylon washer and removing leakage of water of any wall mixture suitable length for 15 to 20mm bore pipe complete all as specified.
S&F in repair stainless steel flushing jet including pipe for Europian type closet of suitable length with brass check nut complete all as specified and as directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity with syphonic action PVC flot valve,brackets and 32 mm bore PVC flush pipe etc. all as specified and fixed in repair.
S&F in repair new brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.
S&F in repair Vitreous china wash basin,white flat back,size 630x450mm excluding taps,waste,chain and plug and porcelain stopper but including brackets.
S&F in repairs kitchen sink coupling stainless steel 75 mm to 100mm dia, including PVC waste pipe of suitable length complete all as specified & directed.
S&F PVC waste pipe 32mm dia 600 to 750mm long fixed to waste fitting of wash basin/ urinal,also in repair all as specified and directed.
S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm.
All as per Srl item No 49 above but length 450mm.
S&F PVC (SWR ) bends 110 mm bore any radius.
S&F PVC (SWR ) bends 75 mm bore any radius.
S&F PVC (SWR ) vent cowl 110 mm bore.
All as per Srl item No 53 above but 75 mm bore.
S & F Stack clamps (100 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.
All as per Srl item No 55 abive but 75 mm bore.
Supply and fixing in repair cutrain rod 20mm dia of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed.
S&F in repairs for stainless steel heavy duty drawer channel/telescopic slide for cupboard and study table of size 10-12 inch complete all as specified and directed.
M&L in repair Prelaminated particle board size 18/19mmm thick, interior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work fixed in repair including taking down existing shutter all as specified and directed.
M&L prepartion of old painted surface of wood & wood based surfces of any decsription not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
All as per Srl item No 60 above but on steel /iron surfaces
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm.
S&F Flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F in repair for Floor door stopper of aluminium alloy body of size 140mm and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed.
S&F in repairs door buffer black made by rubber for wooden door complete all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc water storage tanks exc 250 ltr & n.exc 500 ltrs and fixing for same place including complete all as specified .
Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
buta singh and sons
J S MAAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .