Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.1 LAccepted-Finance | 1 | Accepted-Finance Only one tender and found in order |
Tender Value
₹4.0 L
EMD Value
₹8,020
Closing Date
29 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (civil)
BSNL Civil Division, 2nd Floor, Telephone Bhavan, Port Blair
Dismantling of existing corroded 6 m high Four legged Roof Top Pole structure and construction of new 9 m high GI Four legged Roof Top Pole structure at Babulane, Port Blair
2024_BSNL_192013_1
33/NIT/CD-PB/AN/2023-24
Open Tender
Civil Works
Item Rate
30 days
Babulane, Port Blair
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL, Port Blair
₹8,020
1 Apr 2024
20 Mar 2024
1 Apr 2024
20 Mar 2024
29 Mar 2024
20 Mar 2024
20 Mar 2024 - 29 Mar 2024
Amount
Reinforcement cement concrete work in walls (any thickness) including attached pillers, buttresses, plinth and string course, fillets, columns, pillers, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement. (a) 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm normal size)
Centring and shuttering including struting ,propping etc removal of form for (a) Foundations, footings, bases for columns
Smooth finishing of the exposed surface of RCC with 6 mm thick cement mortar 1:3 (1 cement :3 fine sand)
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
Drilling hole in hard granite/RCC using pneumatic percussion rotary drill and forming rough side bore holes of uniform size and alignment including making the hole free from debris, dust by flushing, etc. and disposal of the rubbish as directed by the Engineer-in-Charge: (a) 20 mm dia
Supply and filling polyster resin grout of approved quality (Lokset-S of Fosroc or equivalent) in bore holes of 20mm dia and alround anchorage reinforcement bars, after completely cleaning the holes free from dust including degreasing the anchoring bars and removing any flaky rust, if present, etc. complete. Resin and catalysed filler to be mixed in one operation. The rate is inclusive of all labour charges and material cost: (a) 20mm dia bore holes
Supplying and fixing 25mm dia MS anchor bolt 550mm long with 125mm thread in one side for fixing to tower legs with GI double nuts, spring&pack washers and 100x100x5mm plate welded to other side for anchorage of bolt as per direction of the Engineer-in-charge.
Installing roof top 4 legged pole structure consisting of the following activities. Lifting/hoisting the materials with rope & pulley arrangement without causing damage to the pole materials as well as the building for installing roof top four legged pole structure, to roof , at third floor, of the proposed building , consisting of GI/MS pipes of 76 mm outer diameter and GI/MS ISA 50x50x6 sections, of total weight about 1.40 MT and installing the four legged pole structure with base connected to the base plate embedded in reinforced cement concrete work ( RCC work will be paid separately). Each leg consists of three MS/GI pipes of three metre long and 76 mm outer diameter connected vertically with bolts and all these poles should be barced with MS/GI ISA 50x50x6 sections by bolting to the flanges available on the poles with MS hot dipped galvanized nuts, bolts and spring&pack washers tightening properly, etc as per the approved drawing . Ladder/cable tray using MS/GI ISA 50x50x6 mm sections connected to the structure with MS hot dipped galvanized nuts, bolts and washers, working platfor with MS/GI plates etc also should be installed as per the approved drawing issued by the Engineer in Charge. The rate includes cost of nuts, bolts washers and labour, tool & plant charges for installing the four legged pole structure as per the approved drawings. (The cost of materials ie MS/GI pipes, MS/GI angle and plate sections etc will be paid separately ) (a) upto 9.00 m height
Supplying at site MS builtup sections for four legged roof top pole antenna mount structure consisting of MS pipes and MSangles and plates anchorage sections of required dimensions etc, with flanges and gusset plates with bolt holes welded to the poles and angles as per the approved drawing of required dimensions including all welding cost, transportation etc complete ( excluding lifting to roof top) as directed by the Engineer in Charge)
Extra for using GI sectins, ie angles, plates, flats etc instead of MS sections ie, angles , plates and flats for executing work vide item No.9
Providing and applying paint of approved specification over the three pole antenna mount structure with two coats of zinc chromate primer should be applied, over that two or more coats of enamel paint Orange/White of approved brand and manufacture should be applied. The rate includes removing the rusted particles from the existing 4 poles of 6.00 each by scrapping, including all materials and labour charges etc complete. (a) Four legged pole structure upto 9.00 m height
Providing G I strips of size 50x3 mm/ 25x6 mm one end connected to the tower leg with GI bolts and nuts [with lead sheath in between] including providing and connecting legs at the bottom of tower and the other end shall be connected to the GI plate earth /ring earth with GI bolts and nuts [with lead sheath in between ] including clamping the down lead flat to walls /stems without any sharp bends using necessary clamps and screws as directed by the Engineer in charge [All joints should be covered by Shalimar or equivalent water proof tape and made air tight]
Credit for parts of dismantled old rusted unserviceable roof top pole structure MS/GI sections like GI/MS pipes, angles, Tees, Channels, flats, plates etc in as is where is condition
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_210308.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .