ADDITION / ALTERATION TO BUILDING AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Dismantling asbestos cement (corrugated, semi corrugated) sheets in roof covering

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, MS tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and any position not otherwise specially provided for

M/L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6.

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note: screed bed layer, cement motar measured seperately

M&L rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantlling of old stonework/boulder masonry or brickwork, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facing, dressed stonework and precast article

M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L rendering 15mm thick on fair faces of bricks work, stone work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete.

M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempering on surfaces of walls complete all as specified and directed by EIC.

M&L for rendering 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement adding water proofing compounder 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for plastered surfaces including preparation for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for Complete removal of existing treatment on wall surfaces including preparation (i.e. brooming down plastered / unplastered surfaces complete) and applying two coats of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.

M & L for Complete removal of existing treatment, making good all disturbed surface and applying 3 mm thick Birla white putty incl Priming with alkali resistant primer coat as prepratory to distemper and two coats of oil bound distemper white or tinted on walls.

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed

S & F machine cut cudappa stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

M&L granite (of any type)work (table rubbed and polished) 20mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for preparing old decorated surfaces and applying two coat of white wash.on surface of ceilings

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm each butn.exc. 4sqm complete including removing from site by contractor at his own expense all as specified & directed.

Taking down shutters of window any descriptionexc. 1sqm but n.exc. 2.00 Sqm each removal from site by contractor at his own expense complete all as specified & directed.

Taking down shutters of window any description n.exc. 1sqmremoval from site by contractor at his own expense complete all as specified & directed.

Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by EIC.

Supply & Fixing 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed by EIC.

M&L 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed by EIC.

M & L for Providing precast cement concrete type B-1 ,1:2:4 (20mm stone aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in cement mortar1:4 complete with joints to match

Providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chulla hoods, chajjas shelves and similar articles and set in CM 1:4 etc complete all as directed

S&F reinforced concrete pipe, class NP2 laid and jointed complete with collers 150 mm bore of pipe

Cutting into existing manholes for 150mm pipe connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required.

S&F 4mm dia Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. complete all as specified and as directed.

S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165.

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. as under (a) Applying bituminous primer on cleaned and dried surface @ 0.7 kg/sqm. (b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 - 0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions. (c) Apply two coats of bitumastic - aluminium paint over the membrane.

M&L for 75mm thick PCC 1:3:6 type C2 ( using 40mm graded stone aggregates) as in plinth protection finished even and fair without using extra cement all as specified.

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed

S&F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed

S & F decorative aluminium grill,weight not less than 3.131 kg/sqm (with frame of size 20x20mm aluminium cleat screwed to main frame) and fixed to wall/window/ventilator with screws complete all as specified and as directed.

S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring of 140mm size fixed in floor complete all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed

S&F IInd class hard wood factory made Glazed and ske- leton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats.

S&F IInd class HW 35mm thick plain framed factory made panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy and fixed

S&F Aluminium alloy anodised barrel tower bolts 200mm long

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples.

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

M&L hard core of gauge nexc 63mm, deposited, spread and levelled inlayers nexc 75mm thick, watered and rammed to a true surface of broken stone or boulder.

S&F Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed.

M& L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M/L for TMT bars 6 to 8mm dia, Cut to length, bent to shape required including cranking, spirally and binding with MS wire (annealed) not less than 0.9mm dia. all complete.

M&L for formwork to sides of soffits of floor or roof beams, cantilevers, lintels etc for flat rough finished surfaces of concrete.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

S&F Decorative tubular rail curtain rod / towel rail, 20mm dia, brass chromium plated complete all as specified and directed by EIC.

S&F for brass chromium plated brackets for 20mm dia tubular curtain rod/towel rail complete all as specified and directed by EIC.

Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in hard/dense soil.

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate)as in foundations,filling and mass concrete

M&L for reinforced cement concrete of M-25 (Design Mix) 20 mm graded aggregate as in footings,foundation beams and plinth beams

ditto but as in columns

ditto but as in beams

ditto but as in slabs supported on walls

M&L for formwork to sides of concrete foundations,footings and plinth beams for flat rough finished surfaces of concrete

M&L for formwork to soffits of suspended slabs such as roof slabs for flat rough finished surfaces of concrete

M&L for formwork to sides of pillars, columns for flat rough finished surfaces of concrete square,rectangular or polygonal

M&L for precast cement concrete louvres and jalies 25 mm thick Type B0 1:2:4 (12.5mm graded stone aggregate) set in CM 1:4 (measured solid) including all mouldings but excluding frame

Supply of liquid water proofing compound

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing in SSR 2010 Part II

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing in SSR 2010 Part II.

M&L for coloured glazed ceramic tiles 300 x 200/450x300 x 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match

M & L for moorum/ red bajri filling in floors or pavings,laid in layers n exc 15 cm thick, spread, levelled and rammed including watering

M&L Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ove 15mm thick screed bed 1:6 all as complete

S &F Vitreous china bowl urinal flat back ,size of 465x355x265 white (minimum),with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe)

S&F waste coupling of 40 mm bore (half or full threaded) suitable for urinals

S&F waste pipe for urinal & wash hand basin

S&F of vitreous china wash basin, white ,flat back, size 450x300mm excluding taps, waste, chain and plug and porcelin stopper but including brackets.

S&F for waste fittings, brass, chromium plated of 32 mm dia for wash basins

S&F of pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts

S&F of PVC(SWR) floor trap of 75mm dia outlet,plain with grating including jointing with solvent cement

S&F for PVC(SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls.

S&F of PVC(SWR) bends of 75 mm bore

S&F Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F of PVC(SWR) 'P' trap of 125/110 mm bore

S&F of PVC(SWR) bends of 110 mm bore

S&F of PVC(SWR) junction single,(Single T) equal or unequal 110 mm bore

S&F of PVC(SWR) vent cowl of 110 mm bore

S/F for PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm

S&F 150 mm aluminium alloy handels cast/plate type

S/F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F stop valve, fix cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixing 15mm bore dia complete all as specified and directed.

S&F bib taps, fix cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixing 15mm bore dia complete all as specified and directed.

S&F PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs

S&F Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F for 20mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Cutting exsisting steel tubing for alternation or addition of 25mm dia GI tubing in position without taking down

Screwing exsisting steel tubing for or addition of 25mm dia GI tubing in position without taking down

Drilling and tapping of exsisting CI water mains in position for branch connection of internal dia 20mm

S&F for 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

S&F for 20 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

S&F for 25 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

S&F Rotational moulded poly-ethylene water storage tanks of1000 Ltrs capacity double layred (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I

M&L for preparing surface and applying three coats of white wash on wall new plastered surfaces.

Returning , filling in, including spreading levelling, watering and well ramming in layers nexc 25 cm

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point

M&L for rendering 10mm thiick in CM 1:3 on Roof slab, when the concrete is still green

S&F 50mm dia low density polyethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls as directed by Engr-In-Charge

S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F chromium plated towel rail 20 mm dia 'D' type incluidng fixing with screws to wall 60 cm long all as specified.

Excavation over areas, n, exc 1.50m deep and getting out in hard/dense soil including pipe lines.

Ditto but depth exe 1.5 mtr and not exe.3 mtr and in disintegrated rock

Ditto but depth exe 3.0 mtr and not exe.4.5 mtr and in disintegrated rock

M&L cement concrete type B-2 1:2:4 ( 40 mm graded aggregate) as in foundation, filling and mass concrete.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping

M&L for loose filling with broken brick of gauge 40 to 80 mm in soakage pits, soakage well

M&L Reinforced cement concrete type B1, 1:2:4 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves complete all as specified.

- ditto but in beams, cantilevers, lintels over 1.5m span

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 mtr mean radius, built in CM 1:6

M&L for brickwork with old size sub class 'B' brick bricks in one brick honeycomb walling built in cement mortar 1:4 complete all as specified and directed.

S&F PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall 110 mm dia.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bldg. security light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

Taking down carefully by unscrewing from board/outlet boxes, fixture and fittings such as switches, sockets, ceiling roses, lamp holders, bracket, ceiling fitting, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

Taking down carefully sub main wiring of any size and type, and making good disturbed surfaces of walls, floors etc.

Taking down existing main switches / DB,s of any make and type including any type of boards etc. complete all as specified and directed.

Material and labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC casing & caping and accessories surface on wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for PVC casing & caping and IS:3419:1976 for accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following :-

(a) One light point controlled by one 5/6 amps one way switch

(b) One ceiling fan point controlled by one switch and one fan regulator.

(c) One exhaust fan point controlled by one 5/6 amps one way switch.

(d) One 3 pin 5 Amp socket out point on the same board with other switches

Ditto but for one socket outlet 15 Amps on independent board with 2.5 sqmm cable and 2.5 sqmm earth continuity wire all as specified and directed.

Supply and fixing switch piano; flush type, single pole, one way, and 5/6 Amp IS: 3854 marked with valid CML No. complete all as specified.

Supply and fixing switch piano; flush type, single pole, one way, and 15/16 Amp IS: 3854 marked with valid CML No. complete all as specified.

S&F socket out let , 3 pin 5 Amps all as specified and directed.

S&F in repairs switch socket combination 2 in 1 , 5 pin 5/15 Amps flush type universal all as specified and directed.

Supply and fixing ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified

Supply & fix stepped type electronic fan regulator flush type 240 vols, ISI marked with valid CML No.and connecting up complete on the existing phenolic laminated sheet etc. as required.

Supply & fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten / angle fittings all as specified and directed.

Supply & fix LED bulb 9 W all as specified and directed.

Supply and fixing LED light fitting 1 x 18W, 220 V AC decorative box type with driver, holder including LED tube light connecting upto with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing ceiling fans complete with three blades, down rods and accessories, 230V , 1400 mm sweep with squirrel cage induction motor all as specified and directed.

Supply and fixing exhaust fan made of steel body complete with single phase 230V, of size 300mm sweep heavy duty, copper winding all as specified and directed.

Supply and fixing LED luminaire 600mm x 600mm , 36Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders and LED Lamp suitable for roof ceiling including connecting upto with driver three core flexible copper conductor cases of suitable size complete. Make Crompton Model LCTLRNE-36FO-CDL

Supply and fixing LED street light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistance complete with driver, lamp, GI bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and directed.

S&F sheet metal enclosure factory made for DBs single pole and neutral double door 240 Volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping , lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F sheet metal enclosure factory made for DBs single pole and neutral double door 240 Volts 12way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping , lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F sheet metal enclosure factory made for DBs triple pole and neutral double door 415 Volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping , lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F MCB triple pole and neutral 240 volts, 40 Amps all as specified and directed.

S&F MCB triple pole and neutral 240 volts, 63 Amps all as specified and directed.

S&F MCB single pole and neutral 240 volts, 40 Amps all as specified and directed.

S&F MCB single pole and neutral 240 volts, 6 - 32 Amps all as specified and directed.

Material and labour for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of nominal cross section area as under and drawing into and including PVC non metallic rigid conduit, accessories,of medium grade not less than 25mm dia ,including PVC insulated stranded copper conductor nominal cross section area as under of continuous earth wire complete all as specified.

(a) Two runs of 1.5 Sq mm as current carrying conductor and one run of 1.5 Sq mm as earth conductor

(b) Two runs of 2.5 Sq mm as current carrying conductor and one run of 2.5 Sq mm as earth conductor

(c) Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor

(d) Two runs of 4 Sq mm as current carrying conductor and one run of 4 Sq mm as earth conductor

Material and labour for earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4.0 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 1 of SSR-2020 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.

Taking down unserviceable , faulty LT underground cable from trenches, wall, floor etc all as specified and directed.

Supply, laying & testing cable XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor, laid in tranches passing through pipes /ducts including suitable size of cable iugs & gland and testing on completion of following cross sectional area and size :-

(a) 3.5 Core, 35 Sq. mm cross sectional area

(b) 4 Core, 16 Sq. mm cross sectional area

(c) 2 Core, 10 Sq. mm cross sectional area

(d) 2 core 6 sqmm cross sectional area

Supply, install erect in trench vertical position steel tubular seweaged welded poles complete with MS base plate of 6mm thick of size 450mm x 450mm finial taper plug pole cap, bolts, nut and screwed, pole made out of ERW MS tubing confirming to IS 2713 Part II of 9 mtr long 410 SP-31 including drilling of holes of required size and nos for fixing of cross arms bracing support/ taking out of cables etc, and painting with one coat of red oxide primer and two coat of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concerete complete all as specified and as directed by Engineer -in-charge.

M & L for laying of HDPE pipe of size 40mm dia of pressure rating 6 kg/cm2 through trenches/ wall/ floor/ on pole in any type soil for protection of cable complete all as directed by Engr-in-Charge.

M & L for laying of HDPE pipe of size 30 mm dia of pressure rating 6 kg/cm2 through trenches/ wall/ floor/ on pole in any type soil for protection of cable complete all as directed by Engr-in-Charge.

M & L tubing50mm bore light grade ISI marked for cable protection/ GI stiper wire, protection at road crossing/ floor/ wall/ on poles or at any indicated situation etc duly sealed at both end after drawing cable including necessary clamp, saddle etc complete all as directed.

S&F PVC junction box of size inside dimenssion 250x200x100 mm complete with industrial connector, including clamp made out of MS flat iron 30x5 mm , connection from junction box to street light fitting as specified & directed Make:Sintex cat no : GS JB 2520

M&L for fabrication and installation of GI pipe bracket made of medium grade tubing of size 40mm dia duly bended by hot forging after filling of sand, length 1.20 mtr including two pairs of MS flat strip clamps 30 x 5mm with GI bolts, nuts and washers complete all as specified and directed.

Supply and fix in repairs LED 60W 230 V street light fitting, pressure die cast aluminum housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway luminiare with excellent thermal management, surge protection device 5KV upto rated power 150 W all as specified and directed. (Make - Crompton Cat Part No LSTS-60-CDL-M or eqvt. make of Havells / Philips)

Supply & fix PVC insulated 3 core 1.5 sqmm multistranded Copper conductor on pole for security light from junction box to street light fititng including making necessaey hole on surface of pole for insertion of 3 core pvc cable inside the pole upto street light fitting as specified & directed. etc complete all as specified and directed.

Cutting of existing cast iron pipe 80mm bores in position for taking out new connection by insertion of new tees all as specified and directed . ( Tee , Lead joint, excavation and earth work shall be measured and paid separately )

Supply and laid in trenches pipe galvanised 'Medium Grade " including fittings for the following bore of pipes :-

(a) 20mm bore

(b) 25mm bore

(c) 40mm bore

(d) 50mm bore

M&L for supply and fixing gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed for following bore of pipes :-

(a) 20mm bore

(b) 40mm bore

(c ) 50mm bore

Supply and fix ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Medium weight 15mm - 142 gms/20mm-210 gms/25mm-455 gms/40mm-690 gms ) for bore of of 20mm dia all as specified and directed.