MLA SCHEME 2025-2026

Amount

Earth work excavation for foundation and depositing on bank for refilling within an initial lead of 10.00 m and an initial lift of 2.00 in hard stiff clay. Stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil and except hard rock requiring blasting including shoring, strutting, bailing water wherever necessary and all other incidental charges etc., complete as directed by departmental officers as per S S 20B

Plain Cement Concrete 1:4:8 (One Part of cement, Four Part of sand, and Eight Part of Aggregate) mix using 40mm ISS HBG metal from approved Quarry including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete to site and other incidental charges etc., complete. as per standard specification 28 V,VI S25

Steel shuttering with MS Sheets and MS angels including fixing in position with country wood scantlings for drain side walls including cost and conveyance of all materials and all labour charges to site and other incidental charges etc., complete. as per standard specification 86 A & 86 K i) Square Column

ii)Plain Surface

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 Using 20mm and down grade hard broken granite Stone jelly for all RCC items of works with mimimum cement contenet of 325 kg /cum and maximum water cement ratio of 0.55 incluting admixtur (plasticier /super plasticiser ) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workabillity without imparing strength and durabillity with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum),5156 kg of 10- 12mm machine crushed stone jelly and with about (4.79 cum) 7670kg of sand but excluting cost of reinforcedment grill and fabricating charges centering and shuttering but incluting laying vibrating with machine vibrating ,finishing ,curring ,etc,,and providing fixtures like fan clamps in the RCC Floor /roof slabs wherever necessary without claiming extra cost etc., compete complying with standard specificaton and as directed by the departmental officer -The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards. (No separate payments will be made by the depatment for the excess usage of materials )

Supply and fabrication of steel using TMT rods for all Reinforced cement concrete works including cost and conveyance of all materials and all labour charges for cuting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete. as per standard specification SS 86 7 & 3, 86A V, VI & VII

Supplying and filling with Stone Dust from approved quarry including cost and conveyance of all materials and all labour charges for filling, watering & consolidation etc., complete as per standard specification

Brick work in cement mortar 1:5 (one part of cement and five part of Sand)mix using Country bricks of size 8 3/4 X 4 3/4X 21/4 including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.

Plastering in C.M. 1:5 mix (one part of cement and five part of Sand) 12mm tk including mixing and finishing to a well smoothened surface, watering cost and conveyance all materials and all labour and other incidental charges etc., complete. as per standard specification TNBPSS 56,57

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 20 C.m x 20 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges 10m2.

Supplying and fixing over the floors best quality of ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

R.C.C.Jolly by a new of following size in M20 Concrete using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Wiring with 2x1.5 sq.mm. PVCinsulated SC unsheathed FR LScopper conductor cable of 1100V grade insuitable PC rigid pipeon walland ceiling withPVC accessories with TW switch box in flushwith wallwith 5AFT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuou earthwire connection of 1.5sq.mmcopper wire for open PVC light point / fan point (for electronic regulator)SD 20

Supplyandrunof2of1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitableheavygaugeMSconduitpipeconcealedinwallandceilingwithcontinuousearthwireconnectionof1.5sq.mmcopperwire and making good of the concealed portion with suitable colour SD 44

Supplyandrunof2of1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgrade on7/20GI bearer wire for service connection mains

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

K.AVUDAIYAPPAN (BID ID -1349251)