Hex Head Bolt with Nylock Nut Size- M10x65 MM, Grade- 10.9, IS- 1367/1364 and Nylock Nut IS- 7001-2005

Regular/Bulk orders will be placed on past suppliers for tendered item or for the items having same description, but of different sizes/ratings/capacities as per detailed conditions mentioned in clause 2.8.1 to 2.8.4 and 2.8.5.3 of NER Bid Document, Ver. 47.0.

The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended].

stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attachedwith the tender.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender condition.

Please indicate [Yes/No] whether you are interested in availing the benefits available to Micro and small Enterprises[MSEs] of their participation in Govt. Procurement in reference to the Ministry of Railway letter No. 2010/RS[G] /363/1 dated 13.02.2019 as mentioned in bid document. If yes, Please attach the requisite registration certificate specifically for the tendered item for the same application issued by appropriate agency. Also indicate whether MSE's is owned by SC/ST/WOMEN/OTHER. The requisite certificate is to be uploaded with tender document. Please note that in absence of the requisite certificate uploaded/ submitted along with the offer , such benefits may not be extended.

Certificate for Compliance of Rule 144 (xi) in the General Financial Rules (GFRs), 2017. "I /we have read the Orders regarding restrictions on procurement from a bidder of a country which shares a land border with India vide Order Ref. F. No. 6/18/2019- PPD dtd. 23.07.2020 (containing office Memorandum, order (Public Procurement No. 1) & Order (Public Procurement No. 2). Order Ref F. No. 6/18/2019-PPD dtd.23.07.2020 (Order (Public Procurement No.3) issued by Joint Secretary (PPD),Department of Expenditure, Ministry of Finance, Gol and OM No. DPE/7(4)/2017-Fin. Part-I dtd. 30.07.2020 issued by the Director, Dept of Public Enterprises, Gol; " Note- 1- To comply bidders are also to certify either Certificate-A or Certificate-B as given under "Other Conditions" of this NIT. 2- Para No. 2.30 of Bid Documents may also be read in this regard.

Certificate-A for Compliance of Rule 144 (xi) in the General Financial Rules (GFRs), 2017 (undertaking given in NIT in this regards may be referred with) "I/ we hereby certify that I/ we are not from such a country and are eligible to be considered." Note-Para No. 2.30 of Bid Documents may also be read in this regards.

(xi) in the General Financial Rules (GFRs), 2017 as mentioned in clause above, in case the bidder is from a country which shares land border with India vide order reference mentioned in related clause above the following confirmation to be provided by the bidder :- (undertaking given in NIT in this regards may be referred with) "I/ we have been registered with the Competent Authority as mentioned in the above Govt. Order dtd. 23.07.2020. I/ we hereby certify that, we fulfil all requirement in this regard and are eligible to be considered (where applicable,evidence of valid registration by the Competent Authority shall be attached)." Note- Para No. 2.30 of Bid Documents may also be read in this regards.

Other procurement solicitations: (a) If a Nodal Ministry is satisfied that Indian suppliers of an item are not allowed to participate and/or compete in procurement by any foreign government, it may, if it deems appropriate,restrict or exclude bidders from that country from eligibility for procurement of that item and/or other items relating to that Nodal Ministry. A copy of every instruction or decision taken in this regard shall be sent to the Chairman of the Standing Committee. (b) For the purpose of subparagraph above, a supplier or bidder shall be considered to be from a country if (i) the entity is in-corporated in that country, or (ii) a majority of its shareholding or effective control of the entity is exercised from that country; or (iii) more than 50% of the value of the item being supplied has been vadded in that country. Indian suppliers shall mean those entities which meet any of these tests with respect to India. Note-Para No. 2.24 of Bid Documents may also be read in this regards.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.