Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAccepted-Finance | L1 | Accepted-Finance As per financial Evaluation | |
| 2 | L2₹9.5 L+₹1.6 L (19.8%)Rejected-Finance | L2 | Rejected-Finance As per financial Evaluation | |
| 3 | Rejected-Technical | - | Rejected-Technical As per technical Evalution |
Tender Value
₹10.2 L
EMD Value
₹25,432
Closing Date
13 Oct 2022, 3:30 pmClosed
SA, ASI, Patna Circle, patna
J.C. Road Antaghat Patna
As per tender document
2022_ASI_714183_1
T-15/100/Aug/22/13830068/Con
Open Tender
Job Works
Works
180 days
Patna
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
SA, ASI, Patna Circle, patna
₹25,432
Yes
9 Nov 2022
23 Sept 2022
14 Oct 2022
24 Sept 2022
13 Oct 2022
24 Sept 2022
Amount
Dismantling tile work in floors laid in cement mortar including stacking material within 50 meters lead.
Dismantling wooden boarding in lining of walls andPartitions, excluding supporting members but including Stacking within 50 meters lead.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete
Providing and fixing partition up to ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms./sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm center to center with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm center to center by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener ormetal screws with nylon plugs at spacing of 450 mm center to center, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm center to center. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanized M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120gms/sqm. (both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG), plaster board conforming to IS: 2095: (part 3) 1996 (Board with BIS Certification marks) 75mmoverall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I) 2011 (Board with BIS Certification marks).
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Providing and applying white cement based putty ofaverage thickness lmm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Provision for Providing steel in R.C.C work with all works. total work 0.765x7800 kg= 5967kg steel required for in RCC work 5969x0.0125= 74.58 kg.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge etc.
Provision for Plumbering works of the Kitchen, Bathroom and Toilet with all complete. [Bib cock]
Angle cock
Waste Pipe
Cistern
Indian Pan
European Pan
Connection Pipe
Wash Basin
Long Band
M seal
Plumber
Labour charge
Towel stand and Hanger
Miscellaneous item
Provision for installation of new fiber door of Bathroom and Toilet with all fitting etc. complete.
Provision for Electrical works of the office area etc… all complete. [Copper wire (1.5 mm)]
Copper wire (2.5 mm)
Copper wire (4 mm)
Copper wire (16 mm) for AC
15 amp switch
15 amp socket
5 amp switch
5 amp socket
PVC Board (4” x 4”)
PVC Board (6” x 8”)
PVC Board (10” x 12”)
Junction
LED and Tube light
PVC Pipe for underground wiring
Screw, nut, Volt …etc
Miscellaneous item
Electrician Charge
Labour Charge
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Provision for curtains of door and window...etc with all complete.
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete
VISION CATALYST CONSTRUCTION PRIVATE LIMTE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .