REPAIR TO FLOORING, CEILING, VENATION BLINDS ALUMINIUM WINDOWS, ALUMINIUM PARTITION AND REPAIRS TO E/M INSTALLATIONS ARC MAYUR VIHAR AND RRC PATPARGANJ (RESTRICTED AREA) UNDER GE (SOUTH WEST) NEW DELHI-03

Amount

Taking down cement plaster on brick or concrete surface of any description, etc up to 15m height building including taking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding / Jhulla with safety measures complete all as specified and as directed.

M&L 15 mm thick rendering, in cement mortar 1: 6, on brick / concrete surfaces of any description, in patches, finished even & smooth without using extra cement complete all as specified and as directed.

M&L 10 mm thick rendering, in cement mortar 1:3, on ceiling surface, in patches, finished even & smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on any faces of brick work or concrete surfaces, chajja facia, parapet wall, using water proofing compound at the rate of as per manufacturer's instructions, finished even & smooth without using extra cement upto 15m height building including all necessary scaffolding / jhulla complete as specified. (Note: The item also includes the plastering work in patches of any size upto 15m height building. Water proofing compound shall be measured and paid as supply only separately).

Supply only liquid water proofing compound complete all as specified & directed.

M&L for preparing the newly plastered wall surface and applying two coats of distemper oil emulsion over a coat of priming paint including a coat of 1mm wall care putty as levelling course on plastered surfaces on walls complete all as specified and directed.

All as per item No 6.00 here-in-before but on ceiling surfaces complete all as specified and as directed.

M&L for finishing new walls upto 15m height building with two or more coat of acrylic smooth exterior emulsion weather coat first quality of required shade over a coat of exterior primer including necessary preparation of surface including a coat of 1mm thick wall care putty etc complete all as specified & directed.

M&L for complete removal of existing treatment on old RCC/ plastered external wall surfaces upto 15m height building by mechanical grinder including cleaning the surface by using wire brush & wash down with water, filling voids & hole with white cement or wall care putty and making the surface fair & even with sand papering including all necessary scaffolding/ jhulla etc complete all as specified & directed.

M&L for applying 1mm thick wall care Birla white putty in two coats on old prepared RCC/ plastered wall surface and making surface even & smooth upto 15m height of the building complete all as specified & directed by Engr-in-Charge.

M&L for applying two coats of Ist quality exterior emulsion weather coat required shade & colour over one coat of exterior primer at upto 15m height bldg including all necessary scaffolding/ jhulla etc complete all as specified & directed. Make : Asian Apex Ultima or equivalent Make as specified in PS.

M&L for applying one coats of Ist quality exterior emulsion weather coat required shade & colour at upto 15m height bldg including all necessary scaffolding/ jhulla etc complete all as specified & directed. Make : Asian Apex Ultima or equivalent Make as specified in PS.

Note for Srl item Nos 8 to 12:- (i) The external periodical services work shall be carried out by authorised applicator of Asian paints or equivalent make as specified in PS as approved by the GE. (ii) The contractors shall provide the necessary insurance cover to all workers carrying out work in high rise building. (iii) Cleaning of window pain, cills & floors etc shall be done by the contractor after carrying out work. Cost of the same shall deemed to be included in quoted rates.

M&L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine, washing down with water and applying one coat of 1mm thick wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying two coats of distemper oil emulsion of any colour complete all as directed.

All as per item No 13 here-in-above but on ceiling.

M&L for preparing the old surface of walls by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one or more coat of distemper oil emulsion on patches to bring the whole surface at par and applying one coat of oil bound distemper of approved tint and shade, or to match with the existing surface on walls complete all as specified and directed.

Description all as per ser No 15 above but applying subsequent coat of oil bound distemper f approved tint and shade, or to match with the existing surface on walls complete all as specified and as directed

All as per item No 15 here-in-above but on ceiling.

M&L preparation of old painted steel surface of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of primer complete all as specified and as directed. Note:- complete removal of existing treatment on steel surface by using mechanical grinder including cleaning the surface by using wire brush & wash down with water etc

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed complete removal of existing treatment on steel surface by using mechanical grinder including cleaning the surface by using wire brush & wash down with water etc.

M&L for preparing the old painted wooden surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with pink primer incl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint to match the existing surface complete all as specified and directed.

M&L for preparation of old wooden or wood based material/ surfaces of any description, width or girth and applying one or more coats of French polishing complete all as specified and as directed.

M&L for dubbing out average 15mm thick in CM1:4 on irregular faces of walls or concrete chajjas, ceiling, parapets etc on similar surfaces (at any height of building) including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old painted surface of kerb stones of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of colour & shade as approved complete all as specified and as directed.

Demolition of PCC of any description and in any position and disposal of all debries to out side MOD land as per NGT guide line complete all as specified and directed.

M&L plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in PCC sub base, roof padding, Gola, etc including cleaning the surface by wire brushing complete all as specified and as directed.

M&L 10 mm thick rendering in cement mortar 1:3 on brick or stone masonry wall surface & roof slab, finish even & smooth without using extra cement, mixed with water proofing compound complete all as specified and as directed. (Note: WPC shall be measured & paid separately)

M&L PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) 100mm thick as in sub bases/ floors all as specified and directed.

Repair to rolling shutter including oiling, greasing, replacement of unserviceable part to closing & opening condition complete all as specified and directed. (Measurement shall be applicable as per area of opening)

M&L for dewatering and cleaning of PVC/RCC (terrace/loft) water storage tanks of any stage (inside surface area) upto 500 litre capacity at all heights with coconut brushes, duster, wire brushes etc, removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.50 gm per litre capacity of tank including marking the date of cleaning on the outer surface of tank body with the help of stencil and paint including removal of old dates already written on tank with paint remover or black paint and disposing off rubbish/sludge complete all as per the direction of Engr-in-Charge. The quoted rate includes cost of taking down & refixing ball valve & other fittings required for facilitating proper cleaning of tanks complete all as specified and as directed.

All as per Item No 29 above but capacity of tank exceeding 500 Ltrs but not exceeding 1000 Ltrs.

All as per Item No 29 above but capacity of tank exceeding 1500 Ltrs but not exceeding 2000 Ltrs.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B2 (using 40mm graded stone aggregates) in floors complete all as specified and as directed.

M&L for coloured, Digital printed, glazed ceramic wall tiles of size 300mm X 450mm x 7mm thick as in vertical surfaces, set and jointed in neat cement slurry with spacers and pointed in epoxy tile grout to match the shade over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. Make:- Khajaria or equivalent

M&L for coloured digital printed ceramic non skid tiles, area of tiles exceeding 0.11 sqm but not exceeding 0.36 sqm and 7 to 8 mm thick, laid in floors with spacers, set and jointed in neat cement slurry, pointed in epoxy tile grout to match the shade over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. Make:- Khajaria or equivalent

S&F Vitrified Ceramic tiles of any colour 8 mm thick (square/ rectangular) double charged, area of each tiles not exceeding 0.36 sqm, in floors/ wall as in skirting etc. fixed with adhesive of fevimate-XL resin mortar Make- Pidilite or equivalent, Make:- Khajaria or equivalents approved by GE complete all as specified & directed by Engr-in-Charge.

Taking down unserviceable venation blinds any type /description and in any position (horizontal / vertical) along with the top rail complete all as specified & directed by Engr-in-Charge.

S&F vertical venation blinds of special collection, self adjusting system of louvers, size 100mm wide (as approved by GE) with aluminium top rail & PVC bottom, weight attached with 100 mm strip with chain operation complete all as specified and directed by Engr-in-Charge. (Make : Vista/ Marvel / Hunter Douglas)

S&F roller blinds of any size and any colour (non- black out series) with aluminium head rail, with chain operation complete all as specified and directed by Engr-in-Charge. (Make : Vista/ Marvel / Hunter Douglas)

S&F in repair 12mm thick frosted toughened glass as in urinal partition fixed with stainless steel brackets & clamps complete all as specified and as directed.

S&F in repair senser based hand drier having Stainless steel finish fixed in position complete all as specified & directed. Make : Jaquar Cat No.: HDR-SSF-AK2807 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair wall hung WC of size 405 x 360 x 540 mm with soft close seat cover complete all as specified & directed. Make : Jaquar Cat No: FNS-WHT-40951 UF or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair Counter top wash hand basin of size 595 x 440 x 185 mm complete all as specified & directed. Make : Jaquar Cat No.: KUS-WHT-35901 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair CP brass 32 mm dia waste coupling of 130mm height for WHB complete all as specified & directed. Make : Jaquar Cat No.: ALD-709L130 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair CP brass 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & Wall flanges complete all as specified & directed. Make : Jaquar Cat No.: ALD-769L 300x190 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair 600mm long braided hose with two 15mm nuts & O-ring rubber washer complete all as specified & directed. Make : Jaquar Cat No.: ALD-801B or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair CP brass hand shower (health faucet) with 8mm dia 1.20m long flexible tube & wall hook complete all as specified & directed. Make : Jaquar Cat No.: ALD -573 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair white vitreous china battery based infrared sensor operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-13255 & SNR-CHR-51097 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair stainless steel toilet paper holder with Flap recessed type complete all as specified & directed. Make : Jaquar Cat No. : AHS -1553 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair slim concealed cistern with floor mounting frame, installation kit and 'S' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified & directed. Make : Jaquar Cat No.: JCS-WHT-2400FS or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified & directed. Make : Jaquar Cat No.: JCP-CHR-392415 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F soap dispenser with glass bottle complete all as specified & directed. Make : Jaquar Cat No.: ACN-1137N or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair 15mm bore sensotronic sensor faucet for Wash basin with 175mm extension body complete all as specified & directed. Make : Jaquar Cat No.:SNR-51021 or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair SS finish paper towel dispenser of capacity 400-600 C/Z towels complete all as specified & directed. Make : Jaquar Cat No.: PTD-SAP-DT0106CS or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair 15mm bore CP brass Angular stop cock with wall flange complete all as specified & directed. Make : Jaquar Cat No.: ALI-85053 or equivalent model of GROHE/KEROVIT (Kajaria)

M&L 18mm thick Dark shade Granite stone slab (of any type) work (table rubbed and polished) in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified & directed.

Taking up or down 15mm dia steel tubing and connections, including removal from site complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, including removal from site complete all as specified and as directed.

S&F Supplying and laying of CPVC pipes SDR 11 & Plain or brass threaded CPVC SDR 11 fittings external dia 20mm, like socket, elbow including necessary cutting and screwing of plumbing fittings with CP extension pieces if required, for concealed work and clamping complete all as specified and directed.

All as per item No 59 here in before but outer dia of CPVC pipe 25 mm complete all as specified and directed..

M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cement mortar 1 : 3, exc 10 cm but not exc 20 cm in girth, in brick walls etc complete all as specified and as directed.

S&F in repair for sensor for white vitreous china battery based infrared sensor operated urinal complete all as specified & directed. Make : SNR-51097 or equivalent model of GROHE/ KEROVIT (Kajaria).

S&F in repair for tubular Towel Rail, Brass chromium plated 20mm dia, D type, 60cm long between flanges including SS screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair for 15 mm bore bib cock brass chromium plated fancy type with elegant knob screwed down high pressure complete including CP cap complete all as specified and as directed.

S&F in repair for 10 ltr capacity, PVC, low level flushing cistern (white) with complete internal fittings, inlet ball valve, float and handle, single syphonic action type complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as specified and directed by Engr-in-Charge.

S&F in repair for white, vitreous china water closet squatting pan ‘Orissa pattern” of size 580x440mm with integral foot rests, including provision of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface complete all as specified and as directed.

S&F in repair 6mm thick designer looking mirror including SS brackets of approved shape & size complete all as specified and as directed.

S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.

Taking down chowkhats or frames area not exc 1.5 Sqm each, with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhats or frames area exc 1.50 Sqm but not exc 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing complete all as specified and as directed.

S&F aluminium anodized ‘D’ type handles 125 mm complete all as specified and as directed .

S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 100 mm butt hinge, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and as directed.

S&F in repair for Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses complete all as specified & directed. Make : Jaquar Cat No.: CON-169KNB or equivalent model of GROHE/KEROVIT (Kajaria)

S&F in repair 15mm bore CP brass sink cock with extended swivel spout wall mounted with wall flange complete all as specified & directed. Make : Hindware Cat No.: F280026CP or equivalent model of Jaquar/GROHE/KEROVIT (Kajaria)

Taking down eaves gutters, rain water or PVC sewage pipe (any size or pattern) including all fittings including cleaning for re-fixing or removal from site (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvant cement or adhesive laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe, single socketed, in any length, with rubber ring jointing with solvant cement or adhesive fixed to walls with PVC clamps complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius with oval access door including fixed to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) plain bends any radius including fixed to pipe with solvant cement or adhesive complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch pieces single, equal or unequal provided with oval access door and jointing to pipe with solvant cement or adhesive complete all as specified and as directed.

M&L for grinding cutting & diamond polishing to old surfaces of floor/ wall, skirting or dado of Kota stone/ granite/Marble stone grinding / cutting operation with marble and application of paint thinner, mirror polishing with clear cloth and cleaning of floor and disposal of rubbish out side defence land complete all as specified and directed.

M&L for Cleaning of Aluminium window glass panes with soft cloth over colin as an agent & filling/sealing the aluminium window joints between frames & wall/granite/kota stone with polysulphide sealant as per the manufactures instruction upto 15m height of the building including all necessary scaffolding / jhulla with safety measures complete all as specified and directed .

Taking down shutters of any description exc. 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed

S&F 35 mm thick flush shutter solid core construction with block board core and plywood face panels with decorative face veneers both faces with 3 mm thick teak wood lipping on all edges complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Dismantling for unserviceable false jack flooring panels incl GI Pedestals and GI Stringers etc complete all as specified and as directed by Engr -in-Charge

S&F for Raised Access False flooring systems tiles size 600 X 600 X 33mm thick, Medium grade UFS800H Panel 1.2mm Anti Static HPL High Pressure Laminated capacity point load 363Kg applied on area 25mm X 25mm. UDL 1250 per sqmtr and impact load 50Kg all. Ultimate concenreted load 900Kg. Rolling Load 180Kg. Pedestal axial load 22KN axial load per pedestal with Pedestal GI pipe 1.5mm thick and 25mm outer dia fully Base plate 100 X 100 X 3mm, Top 75 X 75 X 3mm and stringer 570 X 30 X 20 X 0.8mm GI galvonized. Upto FFH 600mm including all Hadware as per site and manufacturers instruction complete all as specified and as directed. (Make : Flexi Access Floor/ Unitile or equivalent) Note:- (i) Raised Access false flooring work shall be carried out through manufacturer or authorised agency of the manufacturer. (ii) The quoted rates is deemed to include for the cost of T&P etc required for execution of the work.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming IS-15685-2006 of 60mm thickness M-35 Grade, laid over and incl 50mm thick sand cushion complete all as specified and as directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as finishing concrete surface, as in coping, including slightly rounded or chamfered angles laid to shape and slope surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed.

Dismaltling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F rolled mild steel joist, angle, channel, or tee sections fixed independently, without connecting plates, etc,(cut to ordinary lengths i.e within 20mm of the length indicated) of Fe410-W (Gde-E-250) quality-A complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for preparation of new or previously untreated painted steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Taking down aluminium shutter n. exc 2 Sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured separately as Supply & Fix.

Taking down aluminium shutter exc 2 Sqm each and refixing in same opening after tightening and adjusting including replacing of accessories as required complete all as specified and as directed. Note: Replaced of any item shall be paid and measured separately as Supply & Fix.

S&F for pivot suitable for Alu shutter including necessary fixing arrangements complete all as specified and as directed.

S&F for EPDM gasket complete all as specified and as directed.

S&F for rubber neoprene packing complete all as specified and as directed.

S&F for anodised aluminium snap on beading/ tapper clip for fixing the glass or particle board complete all as specified and as directed.

S&F for 150 mm stainless steel butt hinges complete all as specified and as directed.

S&F in repairs brass 4-levers Mortice lock, vertical type, size 100mm for aluminium door complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F powder coated anodized aluminium frames (thickness of powder coating not less than 50micron) for door, window, ventilators, Partition with one or more rebates including joining cleats for fixing etc complete all as specified and as directed by Engr-in-Charge. Note:- Aluminium door/ window/ ventilators/ Partition to be fixed with chromium plated screw not more than 600 mm C to C & sealing the joints between frames & wall/granite/kota stone with polysulphide sealant as per the manufactures instruction". The rate deemed to be included in unit rate quoted. Colour of frame as approved by Engr-in-Charge.

S&F Powder Coated anodized aluminium window/ventilator shutters (thickness of powder coating not less than 50micron) openable/side hung/top hung type ,without sash bars, aluminium sections weight not less than 0.55 Kg/RM necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges 100mm long (2 no.) suitable handle 100mm (1 no.), tower bolts 100mm (01 Nos), etc complete all as specified and directed by Engr-in-Charge. Note:- Glass and Wiremesh paid Separately.

S&F anodised alluminium door shutters, aluminium sections weighing not less than 1 Kg/m including joining cleats glazing clips, rubber neoprene packing , handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

Dismantling wooden particle boarding, any description, fixed in any position with screws.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed to aluminum frame work all as specified and directed.

S&F in position 4.8 to 5mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium frame n. exc 0.5 sqm in each pane all as specified and as directed.

S&F in position 4.8 to 5mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 sqm in each pane all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil etc. including trimming bottom and sides of trenches, leveling/ grading and ramming bottom of excavation complete all as specified and directed.

Demolition and breaking up 150 mm dia (Salt glazed ware, AC / CI or reinforced concrete) set in cement mortor drain pipe, jointed set in cement mortor and taking out of trenches, floor, if required complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil to a distance exc 250m but n/exc 500m and depositing where directed

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1:4 complete all as specified and as directed.

S D Constructions

J D ENTERPRISES

KRISHANA ELECTRIC WORKS

GLIBS CONSTRUCTION

CRB CONSTRUCTIONS

VINAY ENTERPRISES